Search results

I liked how the loader lever was moved from on the loader of the to fender an the tilt steering. My wife doesn't understand but I had 474hrs on my bx25 an I hated the position of it. As soon as I saw the info on the BX23s on the forums an YouTube I had to have it. My local dealer that I bought...

This is what my local prices are where I live to refill tanks. Price haven't changed.

I bought the 45xp a couple of months ago an love it. It was a big upgrade from the Hobart I had before.

I traded my bx25 in on a BX23s. Overall I'm satisfied with it an all the options I got for it. Planning on adding the cab this summer also.

I have one. It's only available in a pin on for the bx. Biggest problem with it is it doesn't come with any kind of level indicator. An you can't see the front edge of the bucket at all. I added one to either side of the bucket when I got it home.

I built mine several years ago for my bx25 then added a back drag. I recently modified it to use on the ssqa on my BX23s. It also works great for pushing piles of topsoil an pushing piles of brush. I made the back out of 3/16 so it will take a lot of abuse.

They are the same as the curl cylinder has. My bucket has bigger quick connects on it so they put bigger ones on the valve.

Had Messicks install mine when I bought my BX23s love it on my 4in1. Just hold in the button with your thumb an the dump/curl function for the bucket operates what ever accessory that's attached an it open/closes it. From what I understand the older 3rd function would only open an close the...

i unscrewed the fitting with the white washer on it an attached my pressure test line. Then capped off the line I took off. The fitting you will take out will have a o ring seal on it.

i did it on my BX23s.

forks are awesome with the SSQA!!

Anyone else have one of these buckets? I had to ditch the new skid steer quick attach that came with my machine an modified the bucket mount slightly but it works awesome.

16" on the left an a 18" on its right. The little bx's handle them surprisingly well.

I plow first now. Tiller found a rock that didn't move. They told me the slip clutch was adjusted already.

I built these. Love them. Go on/off in under 30 seconds

I used a floor mat from Lowes. Huge improvement from the factory one.

I built mine couple years back an love it.

not sure I just did a Google search for single girder overhead crane. To scare everyone like you I to built my own 2 months ago an it works fine. 6" I beam 29' long with 1/4" web. I beveled an welded 2 pieces of beam together with fish plate over the seam on both sides. I have a CM Loadstar...

I think this is what you are wanting to build.

They weren't on sale for the 54". Mine were cheaper at $17.60 each back on 7/10/2015 an that's list price no discount. $55.97 with tax for 3 blades

I broke mine digging out a cement/rock retaining wall. They are made to break as I was told after some not so friendly phone calls to the dealer. Kind of a weak point so you don't bend/twist the loader frame I was told

This is a pin out of the front end loader on my bx25 it snapped while digging/loading rock. took it to the dealer an he said that it is odd for the pins to break cause they are hardened. I asked if I could get a better/stronger one an he said they are all made out of the same material. If you...

what do you need?

I'm in Somerset Pa an I asked a state trooper while we were filling up at sheetz gas station to look at the way I strap mine down an he told me that my bx25 needs to be secured down at each corner. He said running one strap over the front bucket of the machine an one over the back is not...

Well after having my bx25 since January 2010 an after several times removing the step mat to clean underneath an to service several items my step mat has tears an was just warn out. So after calling my dealer an getting a price for a new step mat plus the 11 required clips I decided to go my own...

weather got good enough to put it back on an do some digging. The bigger stabilizer pads work great and are removable with one t bolt.

get one of these. They are only $16 from your Kubota dealer an work great. They are from the B series they said. with a little fabed up bracket by the pump it works great.

it's junk in you tank. Just tore mine down cause of the same exact issues an found 3 bees that we're getting stuck in the fuel line at the bottom of the tank. Had to do the same as you an blow back threw with the compressor. It only helps for a little while then one would get sucked back in...

No other bucket will fit from another Kubota model. You will have to either make one your self or have a shop make it for you. After checking around without success I made a 18" bucket for my bx25. As for a 24" bucket you will find that the machine won't have enough power for that bucket in...

That's probably when they did it as these are the cans that I have but I don't always put the caps on them when they are empty

No not my own I stop at the local gas station as they have both auto diesel an off road fuel. I do a lot of jobs for a contractor that works around a place called Indian lake putting in small sea walls docks and digging out an replacing basement step walls. I get to do all the digging as the...

I'm going to order one of these an modify the screen to fit the opening of my tank.

Well my toy has bin down for a couple of days now after it died plowing snow. So after trying anti gel even tho my fuel is winter blend then changing fuel filters to no avail I then removed the needle nose vise grips from the fuel line an there was the problem. No fuel flowing from the tank. So...

I have a 2010 bx25 an the rops lower with removable pins.

They talked me into getting 2 when I bought my Lincoln powermig 255c and then found 3 on Craig's list for $200 an a long drive an the rest trolling eBay . Apparently people don't know that they cost $187.15 each at cyberweld website. They are awesome an hold up to 150lbs. An you can turn then on...

Just some pics of a snow pusher that I had made for my bx25. Made it heavy duty so I could use it for dirt also. I just copied off of the one's they use to clear the parking lots at the malls.

Dealer can't reset the hrs on the BX's. I just replaced mine on my 2010 bx25 an it takes the same cluster as the bx24 just a change in the part# but its the same unit. They told me the only way that you would be able to set the hours is to disconnect the fuel pump and leave the key one for the...

Seen that Kubota makes a 4in1 for the bx tractors. This was from a YouTube video.

Well all done. A bit tacky yet due to the oil based paint an the fact that its only -3 outside but going to mount it today.

Well figured I would post this bucket I built for my BX25 I did about 3 weeks ago. I was tired of it taking forever to dig bigger holes. Only have few pics as I got to involved into the project. Sides are 1/4" high-tense steel along with the side cutting edges an the cutting edge that the teeth...

Well its finished. Just another coat of paint tomorrow.

last of them

Little more pics

Got it pretty much finished up today. Just have to wire wheel it down and do some touch up grinding then for some paint. Glad Its almost done as they are calling for 5" of snow starting tomorrow around 12

Little bit of progress. Guesstimating on the way.

Hi guys new guy here,:D. My question/questions are I reacently purchased a BX2751 quick hitch for my 2010 BX25 and i'm in the prosess of makeing a blade for it. Already have the blade rolled/bent to match the factory BX2763a (hight/width/curvature) but can't find the part# or specs for the angle...