Search results

1998 NH 1920 4x4, non HSS. Engine recently rebuilt. Sat for two years during rebuild. Have not yet changed the hydraulic filter or fluid and when swapping an FEL hose, fluid appeared to be clear Hydraulic stuff as you would expect. I'm familiar with the diverter valve and it's operation...

Anyone have a 1920 drive shaft coupler or Tach cable laying around they aren't using?

So after way too long, we had the 1920 Shibarua rebuilt after water got into a piston and shattered the rings. It's back up and running !!! Putting together the pieces and I'm missing the tach cable. Honestly don't even remember removing it so perhaps it's laying around in the garage in my pile...

Had the motor rebuilt and now reassembling on this '98 1920. For timing the injector pump, the manual says to use a spill timing method but we can't get it to definitively say how many shims we need. Shims are used stand off the pump from the cam lobes to open and close fuel to each injector at...

Looking for info on reinstalling the crank balancer on my NH1920 after a rebuild. Can't find anything in the manual on the timing marks and proper setting. Picking up engine from shop today and I removed the balancer early on to diagnose the problem. The shop couldn't find any marks on the...

A complete rebuild is required on my 98 1920. Two pistons rings are shattered and have badly scored the cylinder walls. Want to get all the parts together before I pull it and bring to machine shop for resurfacing and turning the crank and boring it out to the next size. Is there a rebuild kit...

Well, I changed the fuel filter and then bled per the manual. I get good crank, and it sounds like it want's to fire, but just doesn't quite get there. What am I missing? P.S. I have the air filter housing removed as it got a thorough cleaning. Help appreciated of where to look next. Cheers.

My '98 1920 has started having issues when in 4WD. Description: 1. When engaged in 4WD, it seems as if the front left wheel binds up. checking play in the wheel, it is too much so perhaps the bearing needs replacement but I get no binding when in 2WD. 2. In reverse, the binding get's...

We bought a 60 Gal sprayer from TSC along with a 6 roller pump and the torque arm kit. We finally got around to setting up to test yesterday and while idling, the coupler that connects the PTO output to the pump sheared in half. Upon inspection, this piece is cast and it appears that the casting...

I have a choice. The 1920 is coming up on a clutch job and at $1000 - $1500 to have our local guy do it, I'm seriously considering doing this myself. The thing that scares me is the need to crack the tractor in half to get access to the clutch assembly. It's a 12x12 mechanical clutch setup and I...

Well sadly, my father in law passed away a month ago. Great guy - Highly decorated B24 pilot and great grandpa to our 3 kids. His wife has no use for his tractor so we're wondering what it's worth. Here are the specs. Northern California located Kubota L4350DT (Year NA) Serial # 61279 1915...

I'd posted a month ago on my 1920's stuck clutch scenario after having been parked for a month or more. After discussing with my tractor shop, he suggested it was probably rusted plate to flywheel as we didn't have the clutch pedal lock down engaged. the fix was to get the tractor on pavement...

My Pop in law's L4350 was parked for 2 days and then it wouldn't start. Lights on dash were dim, sometimes bright. Starter bench tests just fine. Clutch switch seems fine. Grounded and re grounded ground wire. Not even a click out of the solenoid - Well, every once in a while. Hooked it up to...

Greetings Gang - Been a while since I've posted. My 1920 (12x4 tranny) clutch is no longer completely disengaging leading me to think it may be time to R&R the clutch disc(s). The tractor's over at my partners so I haven't been over to look at it yet, but I will check for linkage play...

OK gang - We are thinking the 60 Gallon PTO sprayer from Tractor Supply would be adequate for our needs. Any thoughts on TSC, this product specifally , accessories or other brands we really ought to consider. 2135330 60 GALLON 10' BOOM - 30" W x 39" H x 42" L $494.85 Polyethylene tank with...

Neighborhood group looking to buy a sprayer. Questions: 1. PTO or Electric 2. 3Pt Mount or trailer 3. Brands to avoid 4. Brands to look into 3 Tractors will be using all in excess of 30 HP. Wisdom needed - these things aren't inexpensive. Thanks, Todd

I have to replace the dipper stick on my 757C hoe - Anyonme have any exepriecne and tips on doing this? It look's pretty straight forward but at 60lbs., anything to make it easier wouldn't hurt. Thanks in advance.

Ooops, Posted this in Buying rather than here. I've got a 16', dual axle trailer that I want to add brakes to. Here's what I do know: 1. Use Regular Caliper vs. Disc 2. Do Both axles vs. just one 3. Use Electric vs. Surge I know I need a controller and I think I've got that figured, but your...

I've got a 16', dual axle trailer that I want to add brakes to. Here's what I do know: 1. Use Regular Caliper vs. Disc 2. Do Both axles vs. just one 3. Use Electric vs. Surge I know I need a controller and I think I've got that figured, but your opinions count! What am I missing, what's been...

And I refered him here. Told him you were a bunch of nice guy's who would offer sage advice. His name's Al Bacon and he's just starting his research but already has the 60 acre's. I'm not steering him towards or away from any brand at this point but he did mention Hardy, which I had never heard...

I rolled a log over the FEL and it took out my exhaust stack - Broke at the cast manifold so I have to replace it. Other than my NH dealer, is there anywhere else I can look for the manifold that might come any cheaper. Does anyone have any idea what it'll cost me? I'm doing the R&R myself. Thanks.

Looking for some collective wisdom on adding brakes to the trailer. Surge or Electric? Any brand superior to another. Tandem Axle 18'. Thanks in advance.

I've been using the field mower and haven't been happy with the overall cut/appearance of the cut and thought I ought to look undeneath and see if the blades needed sharpening/replacing. Low and behold, it appears that the sharp edge faces to the rear of the cut and I'm blunting everything to...

Can anyone give me the specs on the 3 Pt. Lift Arm Turnbuckles that prevent the arm's from rubbing against the inside of the rear wheels for a NH 1920, 4x4? Specifically, I need the recommended Arm Length(s) and rod stock. From my stock gear, which I'm not certain is OEM as I bought the tractor...

Can anyone give me the specs on the 3 Pt. Lift Arm Turnbuckles that prevent the arm's from rubbing against the inside of the rear wheels for a NH 1920, 4x4? Specifically, I need the recommended Arm Length(s) and rod stock. From my stock gear, which I'm not certain is OEM as I bought the tractor...

Recently had my well tested for Iron, Hard Water, bacteria etc...Readings indicate hardness is 4 Grains Per Gallon, which from what I've read, is barely hard. Course the tester wanted to sell me $5,300 worth of softners, filters, Iron removeal stuff. Also treating the well with Bleach to kill of...

Well, I've had the tractor (NH 1920) with a loader and Backhoe but like you folks, I want more. And I need it so I don't have to justify to the boss! So here's the deal. Local guy here, selling the following: 5' V Shape Heavy Disc 6' Gannon Box w/ Rippers 5' Bush Hog 12" Post Hole Digger Boom...

Great post going on on Security Systems. I opted to start a new thread on best practices since I'm ready to wire the house before the sheetrock goes up. I want to monitor Fire and Intrusion. I've got a long driveway and a dog. Two story, 3700 Sq. Ft., # Car Garage. What wire do I pull for...

OK TBN'ers. I'm pouring my slabs tomorrow so the framing will begin by mid month. What I'm looking for is also your chance to show off your workbench in your garage/shop etc... because I'm looking for ideas on the ultimate setup. Doesn't matter whether it's simple, elaborate, practical...

I had this posted in NH Owning Operating and Thought I'd try it here. Fortunately AFTER I dug my trenches, my 757C backhoe lost hydraulic power slowly to the point of nothing in just a few minutes. Interesting thing is, the front loader still works. Redirected the Backhoe line back to the 3...

Roll Over\'s and Brothers in Law Well, it had to happen to my Wife's Brother, who is no idiot, just not a tractor guy, yet. I had him shuttling Loaders of Sand into my power trench on my NH 1920 while I was in the trench spreading it out. To get from the Sand Pile, to where I was in the Trench...

Fortunately AFTER I dug my trenches, my 757C backhoe lost hydraulic power slowly to the point of nothing in just a few minutes. Interesting thing is, the front loader still works. Redirected the Backhoe line back to the 3 Pt. Lift and it doesn't lift either. So I thought, perhaps one of the...

Well, The house is being built on our 12 acres in Northern California and I've already put 50 hours on the tractor since end of October. Now that construction is under way, I can turn my attention sligthly towards preparing, selecting, planting and growing wine grapes. On another post, I was...

Well, I've dug my 1500' of trench for power and water. Not too bad for my first backhoe project and the trenches are even somewhat straight! When I first started using the 757C, I averaged about 25'/Hr. Towards the end, I doubled that to about 50'/Hr. This first pic is looking from the...

Saw this for sale and didn't know what it was or if it was even Cat 1. I'm certain someone knows. Todd '98 NH 1920 4x4

Considering putting in Radiant Floor Heating in my new house and I wanted to start a dialogue with people who have done it, investigated it or have any experience with it. I've heard about 50% of homes built in Europe have it, it's popular among east coast new home construction and is...

I've got a '98 1920 MFWD, GST and I'm just curious what the current equivalent TC model would be. I bought the 1920 used a couple months ago with less than 200 Hrs. on it, FEL and 757C Backhoe with a tandem trailer for $18,000. I think I got a fair deal, not a steal, not too much. I suspect the...

Found a pretty good website for backwoods living. It's at www.backwoodshome.com Enjoy. Todd '98 NH 1920 4x4

I've got a 1920 with a 757C Backhoe and the lower frame bolt's that attach the hoe frame to the tractor frame keep snapping on me. NH shop says thay are 16mm, 80, grade 5 (8.8) bolts so I'm using the right ones. In the NH scehmatic it shows two plates, one on each side of the bracket which are...

What's a BX650 with Manual Rippers go for used these days? Would it be better to try and get one with Hyd. Rippers? Unit is clean with no rust and looks almost new. Todd '98 NH 1920 4x4

I've got a NH 757C Backhoe on a 1920. The bolt that connects the hydraulics to the right hand operator lever is long enough so that tremendous stress is applied on the bolt when activating the lever. This controls bucket in/out movement. I snapped the bolt this weekend and it looks like it may...

Well, Now that I've got the tractor (Ford NH 1920 w/Backhoe) I've had the chance to get out and start digging the trenches for my power and water. The bucket on the hoe is a 12" which is OK for the water line trench but I needed 18" wide and 36" deep for the power lines. This had me scraping the...

Now that I've plunked down my money, I get to put it to work! I splurged on the Backhoe model rather than pay someone to dig my water/power trenches and let them have all the fun. Working 12 acre's in the Foothills of the Sierra Nevada's a mere 3 miles from where Gold was discovered in...

NH 1920 3 Pt. Lift won\'t Lift Just got a used NH 1920 4x4 with 757C Backhoe. Year is 1998 and it's got about 192 hours on it. It appears that the lift on the the 3PT. is not functioning, with or W/O the Backhoe attached. The PTO seems to work correctly and when the guy I bought it from demo'd...

Just got a used NH 1920 4x4 with 757C Backhoe. Year is 1998 and it's got about 192 hours on it. It appears that the lift on the the 3PT. is not functioning, with or W/O the Backhoe attached. The PTO seems to work correctly and when the guy I bought it from demo'd the 3 Pt. (with Backhoe...