Search results

New John Deere BM17347 quick hitch with the power angle hydraulic cylinder as well as the hydraulic up/down/left/right cylinder kit and the 54" blade for the large X series JD tractors. X465, X475, X485, X495, X575, X585, X595, X700, X710, X720, X724, X728, X729, X730, X734, X738, X739, X740...

I have a bunch of new old stock John Deere parts and accessories for sale. I'm helping a friend of the family that had a bunch of dealerships sell off his leftover inventory. I have a list on Craigslist. Thats pretty much everything I have right now with prices. One guy who bought some stuff...

I just bought an 04 X595. When its a little cooler it takes awhile to start. I checked with a test light to see if I had juice to the glow plugs. This morning it did now it doesnt. Do they cycle on everytime the key is turned on no matter the outside or engine temp? It cranks and puffs white...

My 3120 has been giving me fits about the steering wheel staying in place. I set the wheel where I want and a few turns of the wheel later it drops down a notch. I leave it alone and soon enough it drops another notch. It wont stay where I put it. The set-up on my old 4300 was way better, it...

I recently traded my old 620i xuv in on the new 50hp 825i xuv. Its nice, rides great, powerful and a blast to drive. I've got 16 hrs and about 70 miles on it. It has the 14" mag wheels and Bighorn tires, power dump, spray in bedliner, brush guard, front fender guards, bumper cover and 5"...

I am looking for a collection system for my 3120 with a 60" deck. I like Trac Vacs idea with a rear pto driven blower because I can run both ptos at the same time. Are there any companys out there that make good collection systems for the mid chassis compacts?

I was looking into putting the vertical exhaust on my 3120 and I wondered if anyone put the elbow on, drilled the hole then put a chrome stack on instead of the black JD one. I was thinking a stock slip on off a Harley or metric bike would work as long as it didn't have baffles. Anyone do this...

The dealer and I just put on my new old stock 60" 7-iron mmm on my new to me 3120. I also put the bigger R4s on instead of the ags it had. 2 questions. First, could you get 3120s from the factory with the bigger R4s and second does anyone else have this deck on their 3000 series cause it seems...

I got the worklights coming now I would like to get nice factory switches for them that go in the plugged slots in the black plastic cover on the right fender of my 3120. There are a couple of open slots for the auto style cruise and I want to utilize them without cutting. Anyone have pics or...

I am looking to get those nice oval JD worklights but don't want to go through the whole goods department at the dealer (expensive and takes forever to get). I think they are made by JW Speaker. Our Hyster fork trucks at work have the same lights, 3x5 oval I think. I don't know who sells them...

I just sold my 00 4300 and replaced it with my dad's 07 3120 TLBM. I have a few questions: How do you level the loader from side to side because the left side of the bucket touched before the right on level concrete? I had a die hard old school 4300 and it was bulletproof, not impressed with all...

I am looking at a new 3520 with the regular hydro, big r4s, deluxe cab, 300cx with the wrap around brushguard, mid pto, 73"hd bucket, 375 backhoe, 3rd valve and the auto style cruise. maybe a few other goodies before i'm done. He quoted 41,329 for an outright deal and will take off 17K for my...

My 2210 is now leaking around the drain plug I think, I just changed the oil and now there is a puddle on the floor. The plug fell in the oil pan so I don't know if there was a washer on it before it fell.

I just got a real nice used 755 for mowing. My question is why would the center blade cut way (1/2") or so lower than the 2 outside blades? It is the 60" mid mower. Is that a sign of a bent blade? What else could be wrong?

I think I want a new 2305 with the 62" deck and thats it. I already have a 4300 TLB for other stuff. I just can't see spending that much or more for the X595 or whatever they call it now. Plus the 0% applies to the 2305 not X series. Too much money to spend for a mower?

The dealer just confirmed it, I can get a new 2305 with a 62" deck and choice of tires for 11,700 good deal? I am also considering trading my 4300 TLB in for a 3320 TLBM, big r4s, 485 BH w/18", 300CX no bucket (I have spares), hydro, 60" auto connect deck, 3rd valve and the fancy grill guard for...

I have appently a '99 4300 that was sold new in 2000. It has the hand e-brake. I am trying to find a mid pto kit for it for a mid mount mower but all that stuff is discontinued. There is one on Ebay (#LVB25037), that is for 2000 and up but I need part number LVBM19542 for mine I guess. Those are...

I found a used 755 kind of close to me that I am going to go check out. Has around 1200 hrs, 4X4, 60" belly and a hyd. snowblade. I want to make sure it is sound because it will me my new (to me) mower. What do I look for on these and how do I tell of excessive blow-by? What should something...

My buddy brought over his 2210 and I could not resist! I think they look sweet, but the ride is a little harsher. Well worth the trade off I think- it looks like a tractor now. Please help me find a set! I will lose sleep until I do.

I bought an X585 and it has turf tires. I am looking for R4s and will swap my turfs and a couple of bucks. Wheels and tires and offset are the same, the turfs on mine are the same as the ones from the 2210 or 2305. I think an X would look bad with the R4s!

I just picked up my X585 with 400 hrs. and a bunch of extras. I wanted the HDAP tires but it had turfs. I was wondering if the 2210 R4s would work. Same bolt pattern? Same tire size and wheel offset? Here are a couple of pics.

I found a sweet deal on a new demo Commercial 60" deck for the older 4000 series compacts. It is covered with bird crap from being in a dealers barn but it has 15min. of run time, the guy went with a 72" instead. The problem I am having is finding a mid pto kit for it. It is a '99 or '00 4300...

Why can't I get to the pictures part of this site anymore? Anyone else had the same problem?

My wife got me the Ertl JD 4410 compact with a belly mower diecast toy for Christmas. Does anyone know if you can get a loader and a backhoe for these? I think I saw the backhoe attachment before. Thanks

I want to change my R4s for R1 ags on my JD 4300. Does anyone know the size of the rims/tires? I have a dealer searching his stuff but I don't think he knows what I need either!

I have a rear remote kit coming for my 4300 and I want to have the top of a top and tilt, or a hyd. cylinder for a top link. Anyone done it on a Deere? What do I need and where do I get it?

Does anyone out there have power beyond and the rear remote (3rd SCV) on a older say 4200,4300 or 4400? I noticed there are 2 extra holes in the power beyond plate, is that for the rear SCV? I just bought the kit and want to make sure it will go there because there is no where else. This is for...

I want to swap my r4s for someone's r1 for a 4300,4400. I have the r4s and I don't care how much r1s tear up, I need the traction. Anybody want to swap?

I just found a seller that sold me a new in the box complete 3rd SCV for the "00" series Deere compacts for 135.00 shipped. Anyone else want one for that price? I can get a hold of him and have him put up an auction for you.

Has anyone got the free toolbox coupon with a test drive of a new 5000 series? Does anyone have one they want to give me or tell me how to get one? Kind of a neat little toolbox!

I painted my 2 loader buckets recently- sandblasted, primed and 2 coats of oil based enamel. It seems as the paint does not want to stick to the primer real well. It will peel off and the primer stays longer, and it is correct primer. What would happen if I just blasted and painted it? The...

I had my 4300 in the mud a little yesterday and got mud all over the hood. I did not have time to wash it last night so I washed it today by hand and powerwasher. After it dried, there are dull spots where the mud was and the other parts are shiny. I tried rubbing them out with my t-shirt and it...

I would like to swap my nice R4s on my 4300 for the R1 ags, any interest?

Someone had some really good pics of Frontier forks on a 23 or 2520, lots of different pics. Can anyone link me to that thread?

Where can I get the best price on JD decals? Dealer is way high.

I was just quoted $770 for the Frontier forks (42") not including tax, can I do better?

I am looking for a set of pallet forks for my 430 loader on my 4300. Who has the best price with the JD quick attach set-up? I see those Construction Attachments forks with 42" forks on Ebay for less than $700 shipped. Does anyone want to sell theirs? Better deals out there I don't know about...

Figured I would start a little questionare here, how many acres do you use your tractor on and how big of a machine do you have? I have 25.5 of some field and woods and a 4300 TLB, 513 JD hog, International 5" box scraper and a 6' KK York rake. WANT A LARGE FRAME COMPACT!

I have an opportunity to buy a '99 4300 TLB 430 loader and 48 hoe for 16,900with 860 hrs or a '05 3120 TLB 300cx, 447 hoe and 400 hrs for 18,200 and it also has Horst welding forks. Which way should I go? The 3120 had a bad hyd. leak that had to be fixed by splitting the tractor and the hood had...

I am looking at a nice '99 4300 HST, r4s, 430 loader and 48 backhoe with 860 hrs and in good condition for 16,900. Good deal or not, these things are getting hard to come by used. I guess I should have kept my 4310 TLB but I did not like the hst "feel" of the electronic pedals. I like the feel...

Ok, I am getting a price of 28,844 for a new L3940, GST, R4, 724 w standard 72" bucket, BH90 and 50 hr service, good deal? The same in a hydro is 29,844. I was also thinking of a 3240 equipped exactly the same, hydro and that is 27,500 with the service. What are all you guys thoughts on these...

I am now looking at the 110 TLBs. What is the height of the canopy? I have a 8' garage door and I am concerned. Is there any way to shorten it up if it won't fit?

I want a 4120 hydro, r4s, 400X and 448 hoe with an 18" bucket and the deluxe hood guard. If I get 20% list I should be well under 30K anyone do better?

I have heard that for pricing standards, take 10-20% off JD's prices on their site and expect to pay that. Any dealers doing better than 20%?

I just bought a used '02 4310 with 475 hrs. I came from a hydro L2800 Kubota and it seemed to react faster than the Deere. I can mash the pedal all the way to the floor before it will start to move. It seems like a delayed reaction and I have the switch set on short stop. I realize that those...

I just bought a used '02 4310 E-hydro, 4X4, R4s, 7-iron 60" MMM, 430 loader with 61" bucket, 1 remote and the 48 backhoe with the 18" bucket and 473 hours for 17,500. What do you guys think of this deal? I sold my L2800 Kubota TLB that is in my avatar and I started this tractor habit with a 2210...

I am looking at a Grand L3540 cab model with air heat and CD, it is hydro has all the lights LA724 loader and 40 hrs. What should I be paying for it, it is private sale.

I need all you fellow orange riders to post pics of your tractor with a Woods 80X mounted. The boom does not appear to come up very far. A side view with the boom all the way up towards the controls would be the best. I need to see how far it hangs out in it's normal transport position like a...

Ok, here is the deal. I can't decide on the new Woods 80x or just putting a subframe on my existing 7500. Is the pump a better way to go or figure out a way to plumb it in to the tractor? Nobody even the dealers seem to know how to do it around here! What do I have to do to run hyd. to the...

I have a '05 L2800 with a Wodds 7500 hoe, my question is I think it would run faster and have more power if run off the tractor hyd system as opposed to the pto pump it has. How do you do it on this machine? My dealer does not know how so he just sells them with pumps.

I need a price check for a new 3240 with GST, R4s, 724 loader with 72" standard bucket and QA. I am getting 20K and 12,700 trade for my '05 L2800 HST R4s, LA 463, 170 hrs. What do you think?

I am looking for someone who has ags and wants r4s, I need more traction. My r4 don't have many hours on them. The tractor is the L2800/3400.

I have been here for awhile and I would like to know every issue that has ever come up with the L2800. I have an '05 with the updated valve and added oil capacity update. What else do i need to know will go wrong with it? My PTO cable is sticking and I kicked the knob off of the new dipstick in...

Ok, I have not been on here for awhile but from a few threads I read, they are fixing the ratcheting noise now. My serial is 53308, I have the better valve and the added fluid capacity with the dipstick, what else is there to have the dealer do? It is an '05, I bought it in the spring of '05...