Search results

Anyone addressed the issue with 2 different tow capacities? I have the camper at 6K lbs, then my tractor with implements and trailer combined weight of about 9K. Can I get a 10K WD hitch to work for both? Or is the camper too light?

I am beginning to think to same thing. All these higher priced cams all have "some" negative reviews. It's like every company has a certain percentage of bad cameras, and most people complain about customer service. I'm 1 hours away from the property, I can't afford something to not work or break.

Just bumping this tread as there may be newer stuff out that could be better or something. I bought a Reolink and it failed to connect at the property, I did have cell service so I don't get it. I wasted $250. Now I am looking for a good alternative.

I bought the Timbren suspension booster, which is just a bump stop that helps the sag with weight on it when loaded, similar to air bags but no air. I asked them if they are ok when I run a WD Hitch and they told me only if I set the hitch to neutral ,otherwise they fight each other. This will...

I didn't know that, only enough to get it off the ground

Thanks everyone, good ideas. I only want to move it once right now but if I take it to the property I may have to move it up a hill dirt road a couple times. The idea of moving the axle in to make it lighter wasn't thought of. that will make a difference on the wheel rig I get.

I was considering buying wheels for one end of my 20' shipping container. It weighs about 5K. I was wondering how much one end would weight when you picked it up with the loader. If it is half it will not do it. I think my lift capacity is about 2200 give or take. So anybody know about how that...

Thanks, I never heard that term "hogs-back beam" but I think I get what you mean.

I had no idea they were that strong, thanks!

Looking to buy one and do the work myself. Cost is a main concern and I know the differences, seems the companies are all biased depending what they sell. Leaning towards pole barn because you can pour concrete later if desired. Only issue I have is the space the trusses take up. I have had...

Ha, that is correct! I have access to several pallets a week free. some are long like 16 ft.

This is basically in front of my shop in the back yard so it doesn't really have much drainage. However, including the diagram you sent, I have another project on old logging roads on our mountain property where that road drainage will be really helpful. Not going to start that till the spring...

Mushroom man?, those may be kinda cool. so does the geo fabric keep it from pushing through the mud? I may do that. Thanks for all the comments!

I was curious, has anyone tried bury wood pallets in the mud to then give gravel support on a parking area? I know the right way to dig it out and spent a lot of money with big rock But I already put clay down and then some gravel. The area stays wet to some degree all year, may be due to high...

Once is enough to learn the limits...

I was always thinking to stay away from them just like a rental car, but you make a good point.

That looks like the same stuff I will be dealing with. I haven't bought a grapple yet but I will have to. I mentioned in another reply about building an old school log cabin so I will need to do some digging quite often. I think my 50 hp Mahindra will be good for maintenance later on. You bring...

That is good to know, I have thought about buying a Bh for my Mahindra but I've weighed both sides of the pros and cons. Having a second machine has much more advantages (except cost), I will be building an old school log cabin so moving logs higher up and stuff like that is a no brainer with a...

Bought some property in NC mountains. so road building, maintenance, tree removal, etc. Lots of rocks to deal with.

That is good info to check, thanks for the tips. I thought the joints usually have a small bit of play just from watching other peoples machines. I am leary about a worn out machine and I'm sure they are not cheap to fix.

Looks like I may be looking at buying one, I've been reading and I always thought Yanmar was a cheap brand but it seems they have good engines. They seem to be priced a bit lower than most others. As far as all the rest, hard to choose. Any owners on here with any advice? And what is a decent...

Do yourself a favor like I did years ago, best investment is a tongue scale. Amazon for $128 by Sherline. I started with a 20ft trailer with 7K axles towing 1500 miles twice a year with an F250. Towed well but once I had it loaded a bit off and it was so nerve racking and dangerous. With that...

Is that a f150? I am looking at a very similar set up but you have a bit more weight for the tractor. Is that about the limit for that truck? What engine?

I do it all the time, however, it is usually in loose dirt or piles of crushed concrete. Never had an issue but I can sorta tell if it is too much pressure.

I bought a utility trailer a yr and a half ago. 16ft $2900. I added a winch used 400 and a battery 150. I got a lot of use out of it and just sold it last week for $3800. So I am going to buy another 2 ft longer and next up in axle weight. I think if I wait a bit I may be able to break...

I was surprised , definitely will make a difference in my trailer axles when it is close to rating.

Great, thankyou so much!

I'm not looking for an exact weight but on my 50hp Mahindra, I was curious as to how much weight the filled tires in rear weigh. I am buying a new trailer and need the info for the axles I need to get. Maybe there is a formula for the tire size? Or how many gallons did you use when you did yours?

do you mind me asking what he charged you? just curious what 2 acres is worth to pay... I also vote to try and burn them

I have the same brand as this one. I have a small body shop and use it at least 2 or 3 times a week. I think in 30 years I am on my 3rd one.

Many good comments so I won't add much. I have had many body shops over the years. Now I am a 2 man show. Definitely get a two stage 175 psi and regulate it down. Do not get a 5hp, go with a 7.5hp. It will be the last one you buy. I run the pipe "at least 50ft" before I put a water separator on...

I have the 2013 5035, I owned 2 kubotas before that, 35 hp and 50 hp. Comparing same 50 hp on each the Mahindra is much better because it was 1500lbs heavier and the front tires are bigger. I was always burying the fronts in mud and that was a huge selling point for me. I've been very happy...

there isn't much to anything wearing out in box blades besides they get ugly when they rust. I bought a used one years ago for $500. It weighs 1000lbs plus so it doubles as a ballast. That one sells for 4K at least now. It is a world of difference when digging in. I know you bought one already...

all the tool truck guys push their boxes because there is such a high profit margin, you are just buying a name. In my opinion, as long as they have roller bearings a cheap one will serve the same purpose just as well for many years.

Mrsig, that is really nice and clean too! Timbatrader and Dirttoys, I wasn't really thinking on the fine points you made but I'm sure in the long run they become important. I think it also matters how much you use them too. Thanks!

That is good input, thankyou. I fear I will have a bunch of rocks where I'll need it.

I'm sure this has been discussed before but doing a search didn't bring any good threads. So Buying the BH to me seems like the less desirable option so you can keep the tractor free with the boxblade, but probably a lot less money. Any thoughts of anyone who had this dilemma?

that is quite impressive. how much time do you have invested?

I agree with the body guys, I have been welding the thin metal on these cars for years with a 220 volt mig using .023 wire. most of the parts on tractors are just a bit thicker than a cheap car fender so can be done easily. Maybe have a body shop guy come over and do it for you.

the only opinion I have is based on my past experience for what it's worth. I went fro a L3230 to L5030, basically 20hp upgrade. For the amount of difference I noticed I really DON'T think you will notice a 5 Hp difference. But when forced to sell for financial reasons, I went with Mahindra for...

I agree that the bigger heavier saws cut faster so less time to get fatigued, it's a balance I guess. BTW, what kind of mill did you get? Nevermind, I see it... Let us know how it works...

always more is better to me, I went from a 30hp to a 50 and I am not sure I would have noticed a "significant" difference in 10 hp judging on how much more the 50 was.

If you can afford it... "BETTER TO HAVE AND NOT NEED THAN TO NEED AND NOT HAVE". Convenience has a price, people are not dependable these days to hire stuff out and they never do the work just the way you want it. I sold my big property so I only use mine around my shop until I buy another...

I didn't get a BH with mine although I wanted too. I think in 5 years I only needed it once, however, once you have something like that you find uses you didn't know would help. I was always of the thought( if you can afford it) of having a separate machine for the BH, maybe find and old used...

I have the same tractor, I also have owned a Kubota 32 and upgraded to a 50 hp Kubota all HST. I agree though for loader work and in the woods nothing beats hst. Sadly I never owned gear tractor, mainly because of what people say about them for log and loader work, so can't make a comparison.

I agree, that is gold! Especially with wood prices now. such a shame you are so far away...

I know this has been discussed a bunch but I cant seem to find the threads that talk about this. Anyone know where they are? I thought I was going the diverter valve way after talking to Brian at Fit rite but now I'm not sure. Anyone who has either set up can chime in on their thoughts of what...

If anybody is still following this thread, I had a question. I am almost done and it has rained a lot here. I have 2 blocks high and no bottom (just regular earth), but I am concerned that I don't have any drainage holes. Do I need them? will the water keep draining down or will it just hold it...

this thread inspired me to start a raised garden right in front of our house. I like the idea of the wood buried to help with moisture as we are gone for weeks in the summer. I was only able to dig down about a foot or more in some places but I want to build a small wall of cinder blocks only 2...

I tow with an f250, 7.3 diesel and my trailer is a 20ft pipe top with 7k axles. When I went to my new tractor it weighed more. With loader, boxblade(#1100) or brush hog the weight I think is between #7500- #8000. Trailer is about #3000. Tongue weight was about #1100. Even though it is within...

ok, better with pics. Maybe I can put a porta power from a pipe coming out of the loader arm to push the outside edge forward and make it parallel to the other side. I just don't dont want to damage the loader arm.

So with only 56 hours on this tractor we ( my brother in law) were clearing some brush. He was not an aware tractor operator and somehow the securing arm came loose on the quick attach loader. so the bucket was held on by only one side and since he didn;t notice it, kept using the bucket to...

so I am thinking I won't be able to put my pole barn up this year but I need a storage place for some things, secure if possible. I was thinking of buying an old tractor/ trailer enclosed unit. the ones available can be 48 feet. So does anyone think the tongue weight is light enough to pick up...

Came across this on craig's list, not very nice to look at but I think the price tag new would have been several thousand. Took it for $550, no scarifies but just heavy implement that I prefer over the lighter ones.Looking into sandblasting and possibly powdercoating.

I was considering getting a quick hitch but am debating on the pat's system or the full quick hitch. I see the major difference would be that Pat's does not allow for the top link and the other 3 pt quicks do, and they seem more solid with the complete frame. Any real advantages or...

After months of working on a decision and funds, I finally got the deal done. Made the jump from owning 2 former Kubotas to a new Mahindra 5035 HST. Tough decision but I gotta say they really have improved over the years I remember when looking a long time ago. Just pulled it in from delivery...

I talked with Brian about doing this and another question was raised so I thought I would get a few opinions, including yours Brian. On a new Mahindra they can add another remote for 2 total but I am still debating on whether I should have 3. If I go with Fit rite set up they would be electric...

I have been deciding over the last 6 month's on my next tractor after owning 2 Kubota's. Great tractors but I'm afraid I have succumbed to the Mahindra 5035 for a few reasons. Weight, lift capacity, bigger front tires, and comparable options for price. Unfortunately, I found out my credit is not...

I sold my Kubota L5030 2 years ago and now looking at a new one. I love Kubota but not sure on the price anymore. I was looking at Mahindra.They seem to have some really happy owners here. the question is about the weight of the tractor.I want to stay at least with a 50 hp but since the mahindra...

I recently was given 300 gallons of off-road diesel but it has been sitting for a little over a year already. My guess is that it will take me another year or 2 to go through it. My question is, should it be ok and should I add some stabilizer to it at this point? If so, is that "sta-bil" that...

On my property I have a lot of "rough" ground that I wanted to smooth out but it has weeds/grass all over.After brush cutting I tried to use the boxblade to dig it up and smooth it out. But the grass seems to clog up on the scarifers so the blade just rides on top. I am no farmer so I was...

I am considering buying one of the mini trucks and found out from another thread(http://www.tractorbynet.com/forums/atvs-utility-vehicles/119363-just-me.html) that you can get them cheap from Japan but must be bought 6 or 7 in a container to get the good deal. I thought a few people here could...