Search results

I am looking at a L4701, MX5400 and the JD4052M. The L4701 best fits my need for getting around on my property, between trees, etc. I do see the L4701 is lighter (3300 Lbs) vs the others. Is it possible to add rear wheel weights? how much weight? are they of benefit? Thanks, John

Hello all, my name is John. I have been a member here for many years but can't remember the last time I logged on. Anyway, I have a JD790, good machine. I may be operating it beyond the design limits, but it is what I have. I have bent the tie rod several time and always bend it back mostly...

I have a JD790 and have gotten several nails in the front tires. Plugs don't have a good success rate. I am thinking of installing tubes and filling with water. The tires are Tital Trac Loader R4 25X8.50-14. Any thoughts? John

I am looking at a King Kutter II, TG-60-y rotor tiller. What are your thoughts on this brand tiller? What does the "II" mean at the end of some King Kutter equipment? Thanks, John

Not sure if this is the right forum. I have lost touch lately, anyway. I have a 1998 and 2004 (new body style) Ford F-150 pick-up trucks. Neither came with a trailer toe package, but both appear to have a plug under the dash for a brake controller. It seems to me I need a wire at the back of...

I have an opportunity to buy a 50 foot X 100 foot steel building built in 1976 for about $3000. I will have to move it. I do not know anything about this type of stuff, but the building seems to be in good shape. What are the thoughts from all you guys? How much should I expect to pay to...

I don't know if this is the correct place to post, but here goes. I need to replace an old Snapper riding mower. Looking at Snapper, JD, Sabre (made by JD) and Sears. Any experts out there? Is there a mower site I should visit? I trust the comments here. Thanks, John.

I am thinking of adding grab hooks to my FEL bucket. I had a thought I wanted to share. I am planning to use "eye" type hooks. Figure I can use the "eye" hole to tie a rope to or connect a shackle, etc. I mostly see clevis grab hooks used around here, but don't see any reason for them except...

I have a JD 790 and want to but an air cleaner service indicator. JD lists P/N AT 118553 (Donaldson) and AT73678 (Filter Minder) and say both fit. Both are $26. Does anyone know what is best? John.

I have been considering buying a loader for my JD790. Can I drive into a pile of gravel or dirt and get a full bucket? Is it built sturdy, or do I need to be concerned with bending something? What is break out force? Anyone near middle Georgia willing to let me see some projects you have...

Anybody know how to tell the difference between 3/8 inch grade 70 and 3/8 inch grade 40? chain. I have a new section of grade 70. The link width and length is different from another section of unknown grade. Does the link size determine the grade? Thanks, John.

What is the best type and brand of deer feeder? I have seen a "On-Time" brand feeder with a lifetime warrenty. Anybody? John.

Muhammad, what is the member level (bronze, etc.) vs. posts submitted? John.

Don't laugh, but it is cold here in Georgia. This is my first winter owning a tractor. I filled my 5 gal. fuel can about 3 months ago, but have not used it since. Is the fuel still good to use? The temp. has been as low as 16F for short times, and stayed in the 20F - 35F range for the last...

We will have a partial solar eclipse here in Georgia on X-mass day. The local newspaper says to use a welding lens greater than #14 to view the eclipse. I went to the local welding shop and the guy there told me the lower the #, the greater the shading, but I think he is mistaken. Anyway, he...

What do you guys recommend for size and lengths of chain? What grades? Where can I find chain information and chain for sale? I have tried B-B Chain's site, but it does not seem to work. Thanks, John.

I had a unfortunate computer problem and had to format my hard drive. [sad] Anyway, I can't seem to locate the R & B tiltmeter wab page. What is the address? I am in the process of filling out a JD customer survey and want to provide them the address and recommend they install them on there...

Hi guys. I was in the local JD dealership today and saw a fuel funnel with a fine mesh strainer and sedimate area to keep water / trash out of the fuel tank. Looked like a good idea. The problem was that it cost $25. and it was not even green. Anybody know where I can buy one for my tractor...

Talked to a JD dealer today about a FEL for my JD 790. He said I would need to also add a "hood guard" for about $45. I was just thinking would this "hood guard" (I have not seen one yet) be worth adding before buying the FEL for added protection and as a place to mount a tiltmeter? Thanks, John

I have a JD 790. The dealer (actually the guy that delivered the tractor) told me to crank the engine at idle speed, let it warm up, them increase RPM. Does this sound correct? Should I operate the tractor at rated speed (2600 RPM) after warm up, or is this causing excessive wear on the...

I have a JD 790 and I am interested in installing a tilt meter. Where do you guys mount them? I talked to Rick at R and B Manufacturing about a possible mount on the fuel cap, but he does not have a design for that. I don't want to drill holes in new sheet metal, you guys have any ideas? John

<font color=red>I don't know what HTML & Markup mean </font color=red>, but I just found this on the <font color=blue>FAQ</font color=blue> page. <font color=green>I thought I would see how it works</font color=green>, hopefully as well as my <font color=green>green</font color=green>, or as...

Has anyone used the tractorcost.com web site to get dealer cost on tractors or equipment? Do you think it is accurate (based on your knowledge)? The charge of $75.00 sounds expensive for the service. John.

Muhammad, can you make the posting system such that if I enter a post to ask me to login if I have forgotten. Several time I have lost a post because I provided my username when posting, but not logged in. The message comes back that the user name is already taken and the post is lost. I...

I have a JD 790, it was delivered to me by the dealer. I am now interested in getting a trailer so I can move it around. The tractor weighs about 2100 lbs. What is the best way to tie-down the tractor to a trailer? Where do I attach to the tractor? Any comments as to size trailer, loading...

Is the transmission fluid the same fluid that also powers the hydraulics? I only see two dipsticks, one for engine oil and one near the PTO (transmission and hydraulic fluid?) The JD 790 owners manual refers to "transmission fluid" and "hydraulic fluid", but I suspect that they are the same...

I am planning on buying a Bush Hog (brand) SQ600, 5 ft. rotary cutter. I heve read the old threads and think a shear bolt arrangement would be best for me. Where is the shear bolt? In the drive shaft? Can I change to b slip clutch by buying the slip clutch drive shaft? Also considering the...

I am considering the SQ600 (5 ft.) Bush Hog brand rotary mower. I have been offered solid rubber rear wheel (standard) or laminated ($50. additional), slip clutch ($75. additional) and rubber front guard ($70. additional). What do you guys think of the SQ600? What options should I consider...

I have heard the term 3pth position control. My JD manual says I have it, but I don't know what it is. I am guessing that it is the ability of the 3pth to maintain is position over time (with the engine running). Does the hydraulic system supply oil to maintain position should the seals leak...

I know this is a simple question for most, but I don't know the answer. Just bought a JD 790 and want to know the best diesel fuel to use. Local service station has "Off road, high sulfer, dyed fuel" and also diesel for use in on road vehicles. The owners manual says to use .05 % sulfer...

I have a JD 790 with 5 hrs. on it. It has a two stage clutch. Half way down for the transmission and all the way down for the PTO. I have noticed that the clutch must be pressed past the center position and into what I think is into the PTO clutch so I can shift gears w/o grinding. Is this...

Thanks for all the input from guys of all colors on this board. I just bought a JD 790 and wanted to provide pricing details. The tractor has 4WD, dual selective hydraulics (for future front end loader), R4 tires with antifreeze and water, 5 front weights and delivered approx. 7 miles to my...

I am looking at a JD 790 4wd. I feel good about the size and quality of the machine. My concern is the 3 point hitch lift capacity of 815 lbs. Is this going to be OK for a 5 ft. bush hog and 5 ft. mower? If I understand correctly the further back the weight (beyond 24 inch rated) the lower...

I am still struggling with JD 790 vs. JD 4300 (both 4wd) purchase. The 4300 costs about $2,800. more. Use will be bush hog, cutting grass, front end loader, etc. Any comments? John

I am considering the purchase of a JD 790 with sliding-gear transmission. (Also like the JD 4300, but price is better). I have read in old JD 770 info. that the "economical sliding-gear is for sustained speeds for long hours". I will be using the JD 790 for front end loader work and backing...

Does anyone know if the JD #47 and / or #48 back hoes for the JD 4300 is frame mounted or 3 point hitch mounted. Also owners, what do you think of these back hoes? Thanks, John.

Does anybody know of some sites to locate pricing for equipment (Land Pride, Woods, etc.) The manufacturer home pages usually do not have prices. Even list prices would be good to get an idea of pricing before calling a dealer. There is a good site at Lawn & Leisure at www.jdlawns.com showing...

Muhammad, is there a way to load the entire thread with out having to click on each response? It would reduce my "clicking" and screen loading time. jplan (CTB) has this feature and it works well. Thanks, John.

Does anyone have experence with JD 790, #70 loader, #7 back hoe or 5 ft. rotary mower? Is the hydraulic system adequate for the loader and back hoe? Can you dig in hard dirt? Is the 25 HP PTO suitable for a 5 ft. rotary mower?