Search results

its overheating and some of it has melted..prior to my owning it. is there a fuse box avail or at least a cover since mine is missing the dirt and moisture getting in there Is causing problems and now the lights are not working

when its running I feel air coming back out the filter thru the little rubber duckbill looking thing. revs go up so does airflow. oils good.coolants good...tight valve? talked to a guy who messes with antiques and he said the 3 cyl dzls do that unless its really bad its ok... that sound...

so the front 2wd axle kingpins on my 3500 hr 5210 are looking pretty bad..well real bad actually....so is it reapairable stuff or does the axle have to be replaced?

mines pretty brittle and has a leak now..just wanna replace it.... what ya think of this one Amazon.com: Radiator John Deere 532 522 531N 531 521 RE7673: Garden & Outdoor

took it to the dealer.they said its normal due to diff gear ratios front to back and gave me a service bulletin that says only to use 4x4 when necessary..as if I can anticipate when im going to get stuck. and of what imploding in the diff as the gears are coming unmeshed of the little pieces and...

either to buy or a free download would be better. haven't had any luck searching online..just cant find one. I can print it if its avail...lots of kaw manuals out there but not for this one thanks fellas

good prices on new eqpt i just got me a new b6..6 ftr. 12ga on top 10 ga on the side 60 hp grbx brand new..1199 why buy a used one for 6-700 when new is best

on my bx2200..800 hrs the lines rubbed thur behind the loader mounts. gotta take half the tractor apart to weld em cuz they didnt bother putting any rubber or anyhting there to isolate them..bunch o crap..

took it off right after I got it cuz it wont fit under the trees. the btm is rusty but its been in my barn since it was new bx2200. not putting it back on...is it worth anything? can I trade the bx in w/o it? I can sell it w/o it im sure privately. its the foldable one....

mostly disassembled. drivetrain is together..sheetmetals off. rad is out..all the little parts are gone..knobs/ labels/hoses. was told it needed an oil pump when it was parked and the pony motor has a cracked head. they just pull started it for yrs til they took it apart. been under a lean to...

so i got a 5210 and am doing what i need to..oils/filters etc. got alotta fittings that wont take grease. got a 540 self leveling loader on it and it hasnt seen alott agrease apparently. got a tool from grainger to try to unplug em...aint worth beans going to try heating them next and forcing...

so i need a rod seal for a bucket tilt on a 541 loader..so i figure its gonna be pricey but it really wasnt. so i buy the kit and take the cyl off. now keep in mind that the cyl requires 2 kits. one for the rod end..one for the piston end. so heres the kicker...ya need a special pos plastic...

2320..2010..6040...5205....5201 is there a way to tell what machine youre looking at by the model...alo of them look the same but the model number doesnt tell me anyhting. i cant figure out hp or what type it is w/o seeing it any help..or is it solely a guessing game w/o researching it

needing to rebuild the bucket tilt.. any deals....or just shoot it to the dealer?

does anyone know where i can get the centers machined out so i can get them welded into a set of massey rims i have?

broek the bellhsg and caught fire right after shearing the hyd and fuel lines. still runs good so.....whattya think about front halfing the trctr and mtg a tank above the engine kind of like in a crate of c channel. then hooking a pto to the flywheel and using it for a generator. i see some...

anyone from here comin?

01 with a 541 loader..3k hrs. real clean..always dlr maintaned. i need some ag tires. it has a sod tire on it now. 16.1 rim. bald tires..crap. want ag tires on it. need a center disc and then i can get rims and tires kinda cheap..but 250 ea for the center disc is kind steep. tucker tires has...

the dlr wants almost 50 bucks and they dont stk it..course they wont give me the part number either... thanks gary

best place for a new or used one...maybe just measure and use what i can dimensionally... dealing with our local massey dlr is the worst..pay up front and then shipping to boot...to a dlr..fergit them ill order it online and not pay the tax... so where can i get one..anyone here a dlr? thanks...

i know its a shakey topic but i need a tiny bit more to lift a roundbale with my 1250..1240? dangit whichever.. anyways i was wanting to shim the relief valve maybe since it will lift a roundbale but not high enough to stack em at least 2 high. if i cant get this to work im gonna sell the...

seems like mine doesnt make soft water for as long as it used to..like it runs out of soft water before it regens.. that poss? thanks gary

schematic or a used harness supplier? mostly need the pto harness but the rest of it is kinda cobbled also thanks' gary

ive got an 8 ft aeromotor from the 50's and just wondered who else uses one to pump water. my well dried up and im fixing to get to jetting a new one. what sucks is the cyl has to be under water cuz the chek valves wont pull suction..it will only lift water...but itll lift 5k gallons a day gary

1600 hrs..good shape too...even all the lights work. light duty offa a horse farm...4 horses...replacing the jd 2010 i just sold ..smaller lighter..should be much better for me any exp with the alamo loader..rhino ...almost 800 lb lifting force is good for round bales too! i think im gonna...

its a 96..needs a few hoses for the loader..ugly shetmetal..1600 hrs.... new bushhog 4 disc 2 row plow loader on it 450 series..it will lift a full round bale? says it will... 3 pt fert spreader turf tires are getting dry rotted started an runs like a top milkcrate full of serious heavy chains...

i have a 2010 with a loader and a backhoe att. diesel. like to send it to someone to have restored to at lest an 80% machine... i want to have an old iece of history i can still use quite a bit for mowing and diggin or whatnot anyone familiar with how to go about this..i dont wanna do it..i...

looking for the wife to stay home with the son..she only works 6 mos of the yr but id rather she not at all...she doesnt want to do nothing so any kind of light *** computer stuff we live 40 mi outta town but i drive in 6-7 days a week for my job. she does a cpl times when shes not working to...

bout 500 hrs...good cond..small dent in the hood..fel also. mid mt 60'' deck. throw in a 4 ft bushhog too...maybe another 400 bucks worth gimme an idea to sell it.. gary

guy wants to trade my jd 2010 loader backhoe tractor for it even up..but if it wont lift almost 1k then fergit it thanks gary

light sw dont work..does all kinds iof crazy crap..parked inside machine too..gets washed but dont sit outside..now i got no headlight s and i could use em come winter ****** where to git a cheap or used one anyone?? seems like its all one assmebly but i havent checked yet..none of the 3 work...

what would be the smallest machine i could eqpt with a fel / mmm /and bushog that would still be able to move a 5x5 bale of hay. sometimes theyre close to 1k. the bx2200 wont do it. i almost cant get much bigger than the bucket on the bx tho cuz i use it to laod 55 gallon drums of feed into...

gotta be a cheaper place to buy em online than thru the stealership air oil trans fuel filter changes due?? bx 2200 thanks gary

gettin ready to do the clutch on this 2010 this summer. im sure its gonna be quite a project since i dont have any way to ahndle this big loader att or the backhoe. everything is a rusty mess to take apart. tons of things are gonna break and strip[ and need to drilled out im sure..to say nuthin...

splined on both ends so i can hook a bushhhog to my bx2200. hasnt been so eay a find northern tool said they had one bu they sent me a shear pin style instead dumbasses are keepin my refund til they get the part back too..aholes..wasnt my fault. i dbl asked em if it was splined on both end...

i didnt no where to post this..classified didnt have a post spot anyways its a 1964 jd 2010 diesel jd loader jd backhoe att works well. smoke a bit on startup. bad glowplug or inj leak.. use it all winter for hay and for whatever it needs in the summer. i have a bunch of pics maybe tomorrow...

i have a bx 2200. . got the fel with it all brand new. i would like to be able to lift about 1000 lbs with it. any chance this can be done? itll do maybe 700 now. how can i raise the hyd press or should i look for bigger lifting cyls my first post here but im sure of may more to come thanks gary