N80
Super Member
I know this question has been asked a million times but what is the cheapest way to hook a ball hitch to a tractor. I have a new 19' flatbed trailer that takes up a bay in my tractor shed. Sometimes I need to get it out/ put it back (tight fit) and doing it with the truck is a pain, especially when I'm alone. I see the three point deals but assume they will go upward since the three point hitch arms are not fixed in place.
Drawbar between the three point hitch arms would have the same problem.
I'm assuming that using the fixed draw bar would be cheap, but not sure if the trailer tongue would allow good mobility that close in behind the tractor.
I've seem hitches that attach to the bucket. Seems that would be touchy to maneuver.
Interested in what you guys use. Thanks.
Drawbar between the three point hitch arms would have the same problem.
I'm assuming that using the fixed draw bar would be cheap, but not sure if the trailer tongue would allow good mobility that close in behind the tractor.
I've seem hitches that attach to the bucket. Seems that would be touchy to maneuver.
Interested in what you guys use. Thanks.