deathtoblackberries
Gold Member
Thought I would start a thread for B2920 owners, here's my opening salvo at the 15 hour mark!
1. No backhoe required I pushed this over with the FEL then got under it with the FEL teeth and ripped it out of the ground unch:
2. Here's the new FEL tooth bar, no holes it pinches on the bucket with 4 large set screws.
3. I purchased the B2920 a little buddy, well not so little this thing weighs 300lbs and is half as long as the tractor. Craigslist for $550. So far its a brute, it will take up to 4" diameter branches, cutting area is about 4x8 inches drum style chipper with dual blades which are reversible. BIG hopper so I didn't have to waste time trimming every twig off branches yesterday I just crammed them in and this thing ate them. It self fed about 95% of what I ran yesterday. Previous owner said his brother sharpened the blades :duh: but its chipping the smaller to 2" stuff okay. I have new blades inbound. I decided not to go with a PTO chipper for two reasons, they are wicked expensive and I need both my backhoe and chipper at the same time. The only comparable new chipper is this China made DEK 15hp aka Sears, Home Depot, Lowes this machine is branded under about 8 different companies. Too many bad reviews and over double the cost.
Ahaha its an American Legend!
1. No backhoe required I pushed this over with the FEL then got under it with the FEL teeth and ripped it out of the ground unch:
2. Here's the new FEL tooth bar, no holes it pinches on the bucket with 4 large set screws.
3. I purchased the B2920 a little buddy, well not so little this thing weighs 300lbs and is half as long as the tractor. Craigslist for $550. So far its a brute, it will take up to 4" diameter branches, cutting area is about 4x8 inches drum style chipper with dual blades which are reversible. BIG hopper so I didn't have to waste time trimming every twig off branches yesterday I just crammed them in and this thing ate them. It self fed about 95% of what I ran yesterday. Previous owner said his brother sharpened the blades :duh: but its chipping the smaller to 2" stuff okay. I have new blades inbound. I decided not to go with a PTO chipper for two reasons, they are wicked expensive and I need both my backhoe and chipper at the same time. The only comparable new chipper is this China made DEK 15hp aka Sears, Home Depot, Lowes this machine is branded under about 8 different companies. Too many bad reviews and over double the cost.
Ahaha its an American Legend!