texbaylea
Veteran Member
- Joined
- Feb 6, 2004
- Messages
- 1,903
- Location
- Brazos County Texas 77808
- Tractor
- Kubota L3130HST w/LA723 loader
GeauxLSU
I don't think you have room to get the necessary tools in there. Do this: take the loader off but before you disconnect the hydraulic hoses move the joystick as if you were lowering the loader. That will tuck the uprights under and open up the angle and give some more room to work. Put a pair of small vise grips on the barrel of the chuck and a wrench on the hex nut and loosen. That will release the chuck.
An auto supply store will have a replacement pipe or better yet a flex hose and a screw extractor should get the remaining piece inside the gun out.
Vernon
I don't think you have room to get the necessary tools in there. Do this: take the loader off but before you disconnect the hydraulic hoses move the joystick as if you were lowering the loader. That will tuck the uprights under and open up the angle and give some more room to work. Put a pair of small vise grips on the barrel of the chuck and a wrench on the hex nut and loosen. That will release the chuck.
An auto supply store will have a replacement pipe or better yet a flex hose and a screw extractor should get the remaining piece inside the gun out.
Vernon