Hi guys, I purchased this 3840 recently with around 3800 hours and am going through it to make it mine. Can someone point me to information or a thread that indicates lubrication type and filter...

Does anybody have any experience with brush hogging on their Montanas? I hadn't gone through a single shear bolt on mine since I bought it, and once I did it was a nightmare. I bought a pack of...

Finally got rid of the skidsteer to switch to a tractor for chores around the homestead. I have previously owned a 1960s Allis Chalmers, but this is my first "modern" tractor. The Montana only has...

I have the above machine, this one is built by LS Cable. I use it primarily for mowing our field with a brush hog on the PTO. It runs for a while and then will just die, acting like it's...

I am trying to figure out what year my Montana 3840 was Built. The Serial Number is 21F4F4AF0268. On the Data plate it says LS 360D. I am thinking it is a 2007 or 2009 but I am not sure. I am...

Greetings all - looking for some guidance on my little ghetto tractor. Montane 3840, previous owners seriously abused & neglected it from new to ~ 1600 hours. Left it where it "stalled out"...

The range gear shift lever located on the left side of the seat has developed a lot of slop. Anybody know how this lever is connected to the transmission?

After totally rebuilding engine including new block which meant everything had to be changed over after all together had a heck of a time getting injector pump primed but cam up with this solution...

I had to rebuild my engine broke crankshaft so need complete rebuild got it all done motor runs good but now my pto won't work I've checked all power supplies all seems good the solenoid seems ok...

New member here. Chance to pick up a Montana 3840 cheap cheap. Only significant issue is the front loader mount is broken (previously welded, poorly). Any pointers on finding a replacement...

I am replacing the Water Pump on my Montana 3840. I am wondering do I place sealant on the paper gasket or not? Will the gasket be enough of a seal without the sealant?

Is there an adjustment I can make to help save the clutch on my Montana 3840. Was turn plowing my garden yesterday when I started smelling the clutch burning. What is causing this? Tractor only...

Looking for advice and for reviews of a tractor I am thinking about purchasing. The tractor is a Montana 3840 4wd with loader. Low hours in very good shape. Does anyone have any advice on this...

Hi you all, I am the owner of a 3840 Montana tractor for 8 years, with a front-end loader. The starter safety switch has gone bad, so I can only start it by using a screwdriver on the starter...

I have a Montana 2008 3840 (38 hp) , 4 wheel drive with a front loader,. 270 hrs. I am interested in selling, any one have an idea what I should start out asking? Tractor in in excellent shape...

I am looking to replace my Montana 3840 tractor, any suggestions?

I am looking for a new tractor, I would like to get away from the montana, LS line of tractors and go with something more mainstream. I have a **** of a time getting to a dealer. Required...

I got a quote on replacing my clutch today for $1200, does this sound right to anyone?

greetings! i recently purchased a 3840 tractor on e bay.i have no owners manual or info on tractor.would love a little info on this unit.need to change the oil but when i look under unit there are...

After many hours of research and many hours of reading these forums, I finally pulled the trigger on Montana. I was stuck on three tractor manufacturers, Kioti, Branson, and Montana. I have forty...

Im looking at the 3840 with FEL and 6' brushhog.... was looking at JD and Kubota, the Montana prices with 4wd blows the Kabota and JD away! Anyone know what discounts are on Montana usually...

A few photo,s of the undercarrage on the Montana 3840 4x4 tractor