There is no way around it, I'm getting older. While I enjoy the freedom of my open station M6800 I'm growing weary of the poor climate control system on it. It seems the heater only works in the...

I have a New Holland TN75 and a Kubota 4630(hydrostatic) on my 150 acre farm. The TN75 is a great machine but the Kubota is underpowered and constantly overheats when I am mowing or doing other...

I have a John Deere 5325. It has the EH 3 point hitch. Recently, the hitch has stopped lifting quickly (it will take almost 2 minutes to go from the lowest point to the highest point at 1500...

Since last winter I have had an intermittent starting problem with my 7-8 year old JD5325. I can turn the key and nothing happens....sometimes a click. If I immediately tried again the tractor...

Hello Folks, My JD 5325 diesel tractor won't start. I was gathering wood while the tractor idled. It slowly began to idle more slowly and then quit altogether. After a bit, I was able to restart...

I just got a quote of $33,500 for a 5325 with 542 FEL NSL, power reverser, economy PTO, straddle mount, and Ag tires. He said they didn't have any 5425's and probably wouldn't get any more since...

Hello again, I am still in the midst of deciding which tractor to buy. This has been a long ordeal with so much information to try to absorb. Thank you all for your previous help. Since my...

I just bought a JD 5324 4WD. Can some recommend me some mowers for it. I think Im going to need both a brush hog and a finishing mower. How big of a brush hog can I safely run? It is this tractor...

I went to look at a new Deere a few days ago and I was very suprised by the price. I though it was some type of mistake but I thought I would run it by you guys to see what you think. What I...

I mentioned on another thread I was looking for a Kubota M5040. IN my search, I found a JD 5325 that I like. I want to know if you guys (gals too) think this is a good deal or not. 2007 JD 5325...

Hey, I'm looking at quotes for a John Deere 5325 with the following specifications: -12 by 12 or 24 by 24 power-reverser trani -full front weights & grill guard -1 rear remote valve -Filled rear...

I own a 2008 5325 that is giving me fits with the fuel system. I looked at a couple of the other forums to get some ideas, but still having issues. I changed all the fuel lines, as the system was...

I was cutting hay last Friday when the instrument dash went blank. Only thing that works on the dash is the emergency flashers and the hour meter will appear but is not working. Checked fuses...

I have a friend who has a 5325 he is selling. Don't know the price because he is selling it as a package with some equipment. Checked prices on the 5325 they seem to be 34-36k with a cab...

Has anyone installed a creeper gear on the 5025 series Deere? I have a 5325 with the 24 by 24 transmission and need lower gearing for running a transplanter. Does anyone know how difficult it is...

I'm planning on replacing the fluid in my JD5325 front hubs with MFWD. There is a female drain plug in the hub that looks square and it is about 1/2 inch size. Anyone know the exact size of this...

My JD 5325 lift does not go down as far as it should. I have just recently purchased this tractor, Until this tractor I have always had Ford or New Holland tractors. The speed of raising and...

Hi all. I need some advice on what specs to look for in a gooseneck trailer. I have an F350 7.3L Diesel Crew Cab Short Bed 4x4 with GN hitch and want to pull a: John Deere 67HP 5325 MWD...

JD 5325 starter will not engage. All troubleshooting ideas check out okay. It is not a shuttle shift. Any ideas?

I have a John Deere 5325 with a john deere 542 loader. I am trying to find the lifting capacity for it. I need to lift a 2300 pound outdoor wood furnace off a flat bed truck that is 4 ft high...

Wandering if there is any way to lodge a complaint to John Deere on a dealership without going through the dealership. I don't see anything on-line. I feel that I was severely over charged for a...

Considering buying either a 5325 or 5425. Besides the obvious cyl/size differences are there advantages of the 5 vs 4 cyl engines, where are they made etc. If anyone has one of these I would...