I just purchased a tractor that doesn't move. The former owner said he owned and operated the kubota for 3 years with no issues. Once the tractor hit 300 hours he decided drain the hst fluid...

I need to hear from you guys on this one. It is driving me nuts. Note that this problem has been going on for YEARS. When I go to start the tractor (after preheat) I turn to "Start" and you can...

Hi guys. I'm looking to buy a Kubota B2400HST for general mowing work, front end loader stuff and some light log hauling in the woods. I'd probably like to also run a small chipper and log...

i purchased an older lowhours b2400 series tractor last fall and want to go to turf tires. i have had no problem finding them for the rear. but i am having an issue finding them for the front. my...

Hey guys, I have a B2400 HSD 4wd with 730hrs. I bought it at 620hrs about 6 years ago. So not much use. My issue concerns the center front axle (pivot?) joint which is leaking oil. I first...

my 1996 b2400 dynamo (that's what kubota calls it) no longer can keep up with my nighttime lighting (all LED - only 20W total). if i run in the dark for more that 2hrs, i start loosing LEDs and...

Just changed out the HST transmission which was a royal PITA and now neither one of the PTO engages? Did not touch anything on the rear differential and they were both working before. I can...

Hey all, just thought I would post up the fix I put together today. Have creeped the forums a few times for help, hopefully this helps someone else. Yesterday while working on a steep incline...

Hello, I'm new to the forum and I have an issue with my Kubota B2400 occasionally making a clicking sound when trying to start. After up to a dozen attempts, it will start. I saw something in a...

Hello, I am in need of some help on this tractor - Kubota B2400 HST 1650 hours and 60" mower. When pushing the forward/reverse pedal, tractor jumps a little, but won't move but a couple feet if...

I have a B2400 with a trencher and a front blade attached. I recently had a leak in a line. I replaced the line and now I can not get the trencher to raise up. It is acting like it is trying to...

Hello Im new to this fourm but I have 2 items I need to sell. Mower deck C60-24B and a Grass catcher for the same tractor. Best offer on both. Grass catcher was only used a few times, its all...

I need to stop a leak in my Kubota B2400 axle housing. I have removed the right rear wheel, removed the 10 bolts holding the axle housing to the differential. How does one go about dislodging the...

Help im tring to get a part # for a ridgid hydraulic steering line i found the line on a post

Hi all. I have read a lot of discussions about this Kubota probleme where the starter solenoid clicks about 10 times before the tractor finally starts. Il have had this problem for about 3 years...

Hi, I am having difficulty undoing the bolts that secure the 3 blades. I'm turning anticlockwise, but the whole spindle assembly is turning together rather than loosening. Any suggestions...

I have a Kubota B2400 that was bought with a back hole on it I remove the bake hole to use a Burch hug but the 3 point wont lift it off the ground. it will go up and down when noting is attach to...

Hello, Can anyone recommend a place to find Kubota parts? I'm aware of Messicks and the other big ones, just thought there may be some obscure ones that I'm missing. Thanks. Tom

Anyone know if they have a conversion for the front bucket to make it quick attach, so you can use the quick attach pallet forks, grapple, etc. thanks

I have a Kubota B2400 HST with loader and belly mower and turf tires. It has 335 hours on it. Stored inside. Runs and looks great. I am looking to sell it to upgrade to an L3800. Any pricing...

Hi Guys, I have a Kubota B2400 HST I have been using for 10 years. Two days ago the bucket and the 3 point stopped moving. This tractor uses the same hydraulic pump to run everything including...

First, I would like to introduce myself. I am new to Texas and owning land. This is my first tractor. I have very little previous experience working on mechanical equipment. I am an Electrical...

Just joined today as I'm about to buy a used Kubota B2400. Model year between '95-99, not sure exactly. It has a Loader and Backhoe and about 2000 hrs on it. I am paying $10K for it. It's in very...

hello, I am looking to make an offer on a Kubota B2400 with loader and Backhoe it's a 1998 in fair shape with 301 hours any help on how much a fair price is would be aprecated. Thank you, Steve

hello, I am looking to make an offer on a Kubota B2400 with loader and Backhoe it's a 1998 in fair shape with 301 hours any help on how much a fair price is would be aprecated. Thank you, Steve

Has anyone replaced the seal that goes in the back of the bell housing where the shaft comes out to go back to the transmission? Just wondering if The shaft comes out without splitting the...

Have only removed my Kubota B4672 from my Kubota 2400 HSD ~3 times since buying new in '97. When I put the backhoe on it has always been a 2 person job. In trying to install it yesterday I forgot...

Does anyone have access to Kubota documentation that would tell me what year a Kubota B2400 with serial number 70212 was manufactured? thanks NedPA

I don't seem to be able to find the drain plug for the front transmission hydraulics. I have compared the manual and several other internet graphics but I am still at a loss. It does look like...

OK. Sitting up sick with what is either a nasty cold, or the flu. I'm up, I'm bored, so the time has come to write up the "transformation" of my little Kubota B2400 into a small woodlot logging...

After lurking for a long time I finally have a question that the search function cannot answer. With winter approaching, I need to add hydraulic remotes to my 1997 Kubota B2400 HST to lift and...

I am interested in putting a rear snowblower on my B2400, is the BL2660 correct model? I would also like to put a blade on the front, either using the the loader or remove the loader and attach...

Need some help here. I have a 1500 hour B2400 HST. Here is whats going on. All the hydraulic functions work perfectly including the FEL and the 3 point. In REVERSE the power is completely normal...

Need some help here. I have a 1500 hour B2400 HST. Here is whats going on. All the hydraulic functions work perfectly including the FEL and the 3 point. In REVERSE the power is completely normal...

I won't drag this out too far but I need help with this one. The tractor is a B2400HST 4WD with just less than a thousand hours on it. The Hydrostat seemed to be showing some signs of a...

hi, i have a 1995 kubota b2400 which i recentley bought. i was using it for 1-2 hours when i developed a problem. i was using a scrape blade to smooth my driveway when the 3 point hitch would...

All hydraulics on my B2400HST are unresponsive except power steering after transporting. I have a trencher and backfill blade on this tractor and the 3 pt is restricted from movement normally but...

Hello, I just recently purchased a used B2400 Hydrostat. I was hoping to use the 3pt snowblower, that I used last year. But when I measured it today it is 6ft. I bought it used last year to use...

Originally posted in Kubota section, no replies. Hoping someone on here might be able to giveme some advice before I start doing something crazy. b2400 jumps out of gear...

HELLO, I HAVE a PROBLEM WITH a B2400 TRACTOR. SYSTEM WILL NOT OPERATE IN EITHER DIRECTION DRAIN OIL AND EVERYTHING SEEMS NORMAL, NO METAL RESIDUES OR SEAL ELASTOMERS WHEN DRIVING THE PTO BEING...

HEY GUYS i might need to sell my kubota b2400 (1998) it has only 410 hrs . Has FEL. 6 ft. back blade, 5 ft. Befco finish mower, and detachable toothbar.Tractor and all implement alwalys garage...

I just purchased a B2400 with LA 351 loader.When I try to remove loader,it will not release from fixed pins so I can drive out.I put the bucket on ground,remove pins on loader frame,tilt bucket...

I have decide to change the oil in the front axle from UDT to gear oil as it has been leaking along time. The manual says use SAE 80-90 but I have a drum of EPB 80w-90. Would this oil be suitable?

New to post here but I wanted to bragg a little on my new to me Kubota B2400 4X4 HST tractor. Saved me $1200.00 dollars this weekend putting down new sewer field lines. See Pictures and...

My 2400 tends to whine a little (as does the rest of the family but that's another topic) when I first engage the tranny going in either direction. Is this normal for these hydros? It appears...

Hi All, Just bought a used B2400 Kubota. Tractor seems to run really nice, but I cannot for the life of me find how to hang the belly mower so it doesn't lower with the 3 point. I have a...

Hi, my B2400 has a noise when moving F or R, it's a kind of a chatter, and worse in high, but seems to be more hydraulic based than mechanical type of chatter. It moves and actually operates okay...

I have a b2400 with a loader. The spool for the loader is labelled in, out, a,b,c,d and DFP. To me, all self explanatory, except for DFP. There is a line coming out of the DFP position which...

Hello, first post here -- hopefully, of many. :) I'm checking to see if I'm getting a steal and what I should specifically look for in terms of checking the whole deal out. I have the...

We loaned our Kubota B2400 out. They lost the key and jumped it with a screwdriver. Now, the key will not start it and if it is started and you insert the key it dies. What did they do to...

My B2400 has a problem with either the starter itself or the solenoid. It takes several turns of the key to get it to crank. All the interlocks are working properly, battery is new, connections...

Has anyone else had a leaky front axle on a B2400? This was a new design of theirs in 1998 that uses o rings on the front axle pivot point to seal the fluid inside. It always leaks at the pivot...

I recently bought a used B2400 HST. Runs great and most features work similar to those on my old Yanmar geared tractor. Love the HST and power steering. But the owner's manual is a little skimpy...

I have a Kubota B2400 plagued by a clicking only solenoid. Checking voltage under load at the solenoid yeilded only 6 volts (barely enough but not to really engage it). I went to Auto Zone and...

owning-ML-859883-ML- Kubota specific thread. Does anyone read the forum descriptions anymore? :)

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix...

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix...

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix...

owning-ML-741783-ML- Posted in wrong forum.

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix...

owning-ML-741782-ML- Posted in wrong forum.

I am a new tractor owner of 10 months and wish to thank the many contributors to this forum. My learning curve has really advanced plus my confidence, safety and enjoyment are hard to measure. I...

I have a B2400 with 370 hours on it. After bush hogging fields today for a couple of hours I noticed an oil leak - drops comming from the bottom of the rear axle on the right hand side of the...

Can anyone tell me how to remove the spring pin from the hand throttle on a kubota B2400? I have the service manual which says to "tap" it out. But the spring pin appears to wedged in too...

my b2400 , every once in awhile , when i turn the key i just get a click, keep dooing it and it will finally engage, once it is warm seem to be ok and sometimes it won't do it for days. i cleaned...

It appears that one of the oil seals (part 060) on the front spindle (part 010) has grown a leak and needs replacing. The picture from the parts book shows a relatively simple arrangement. It...

Any guesses what one of these might be worth? I don't know much about the tractor except it is a B2400 with FEL and about 400 hours. Don't know the age, it looks like it has been fairly well...

I have a 1998 B2400 with 860hrs on it and suffering some trouble with the hydraulic system. I changed the fluid,filter and suction screen and it seemed a little better. everything works good when...

I just got a price on a b2400 hsd 60mmm, FEL, R4tires filled, Curtis enclosed cab with heater, chains and two sets of blades for the mower. Its really pretty clean and has 300 hours on it. I got...

Thanks for the replies to my previous post! I've attached a labeled photo to better depict my problem. Question, is it possible to weld a new bolt to the block and then attach the plate with a...

Hi this is my first post on the forum. I am a new (used) B2400 owner with a major problem (see photo). I bought mine used 5 weeks ago and just noticed that one part (where the top left bolt...

Hi: Just got a B2400 last weekend. After putting a few hours on it I have found that ocassionally the HST pedal will stick. Sometimes it releases right away, other times it will keep going for...

I need some asssistance. I have found a 3 yr old B2400 (new in 1998)that has 610 hrs on it with a factory loader and backhoe. The B2400 is a 4wheel drive Hydro with bi speed turn. Turf tires on...

About how much should a 890hr B2400HST with a loader go for? Is 890 hours too high, assuming the tractor has been maintained properly? What would I look for as far as common problems? Thanks.