Started the tractor after about a month and it's leaking hydro on both sides where the axle comes through the frame 🙁 I'm hoping it's just the seals, but since they both blew out at once?? That...

The 3pt hitch on my BX1850 is leaking down quickly, I could see it slowly lowering when I had my small landscape trailer connected. It was fine another day, and then was leaking down again. I...

2007 BX1850 I pulled the belly mower out and tied up the mid PTO stub shaft up to the bottom. I had previously move the selector to the rear PTO only. I致e run this tractor with a small bush hog...

Hi, can a tg2542 blower be made to fit a bx1850 easy enough? I have an opportunity to pick one up for $200. Thanks

So I picked up a second hand BX1850 and it has a few issues. With some initial research I can see that there has been several recalls/bulletins on my machine that have not been completed. Will...

I bought the hydraulic chute rotator for the BX2750D snowblower in December 2016. Depending on the day, it will rotate fine from fully right to fully left, but then gets stuck in the forward...

Can anyone give me and idea of the value of a 2006 Kubota BX1850 diesel with 300 hours? Mower deck 54inch. Good condition! Very well maintained! Thanks!

My tractor has about 300 hours. A few weeks ago there was a vibration when mowing so I shut it down and pulled the belt covers. All of the four bolts on the pulley were loose and two were...

Just bought a new to me x1850 with a mower deck 130 hours . I was mowing today and stopped to move something . I disengaged the pto and was getting off the tractor just as the blades were slowing...

Just bought a used bx1850 with a 54" deck . I removed the ROPS so I can fit under some low hanging tree branches . It has a 100 or so hours and was dealer maintained with all the recalls addressed...

Just bought a used Bx1850 with a 54" mower deck . I am picking it up from the dealer and borrowing a friends trailer . The manual says the mower deck is 67" wide , but the trailer is only 60" . Is...

I have a bx1850 and haven't had much issues in starting as I keep it in a garage. I would like to install a block heater but through searching haven't found a good where to install location. The...

I picked up a BX1850 two months ago with 135 hours on it. It was worked fairly hard judging by the physical condition, used by a homeowner to clear/grade driveway for a new house. Mower was never...

I bought one of these a while back for my battery charger: CTEK Comfort Indicator Panel | CTEK Battery ChargersCTEK Battery Chargers What is the recommended way to connect to the battery? The...

Good evening. I have an opportunity to upgrade from my current 2005 BX1500 with just over 500 hours to a 2008 BX1850 with just under 500 hours. 48" to 54" MMM. FEL on both. Possible difference...

What is all involved with removing the fuel tank from my Kubota. Something got in the tank and is causing fuel blockage. Need to clean it out.

Does anyone know the torque specs for the BX1850 tow bar (installing Bro-Tek rear skid plate)? The instructions say to unbolt the two front bolts on the tow bar to attach the plate.

Very new here......trying to get some feel for "Is a 2007 Kubota BX1850 (w cracked hood and 711 hours) worth $4k". Used in a cemetery, they traded it in for a zero turn. At an established Kubota...

I have a 2007 BX1850 that will pop out of 4wd when it gets in a bind. When I say "bind", i just mean that the tractor has to pull hard like with a box full of material or about anytime a good load...

I made this skid plate this weekend. After replacing the hst fan I thought it was time. Any thoughts?

Hi, I'm in the process of remounting the chute deflection actuator on my BX2750D snowblower, which is front mounted on my BX1850. The original installation was pretty cobbled, failed, and I'd...

All I see is that the 1860 has metal hood and fenders apposed to the 1850 plastic.

Anyone know where to find a PDF version of a workshop manual ?

I have a BX1850 that needs a new hood. I would like to install the new metal hood from the BX1860. Has anyone done this before ? Also were is the best location to weld hooks on the bucket of the...

Hi everyone. I could really use some help. I have two acres of semi-wooded land in Niagara, Ontario, Canada. I just ran my Yardworks mower into the ground and I'm looking for an upgrade. I...

I have a couple of questions on removing the fenders and floor pan on my BX1850. 1) How does the speed adjusting knob for the 3PH come off. I can not see any jam nut against the end of the...

Hello. Im new here so go easy on me please. I blew a seal on my BX1850 today and i need help with how to repair this. I don't want to take the part off and find out that's not the way to go. Its...

Has anyone installed one of the factory block heater kits on their BX18**. I purchased one of these kits and the pictures are black and impossible to identify any components. Was hoping someone...

looking for a used trac-vac 662 or Kubota bx1850 bagger for 54 inch mower deck. I do not need the deck boot so if its not included no big deal..

Someone told me that you can not put a backhoe on a BX1850. Only the BX2200 and BX 23,24,25. Is this true? And if yes, will it have enough HP to get normal jobs done?

Looking for a BX1850 or close to size Kubota with mmm and fel. Am in the northwest North Carolina area but would consider shipping if price is right. Similar machines would be considered. Thanks

I have found a 2007 BX1850 with 73 Hours for $6000.00 dollars at a dealer in South Carolina. I have read that the 1850 is not the most desireable BX. Is there problems or issues with the 1850? Thanks

Hello everyone. New to the tractor world, but age and over 18 years of military service have shown me the value of having the right tools for the right job and listening to experience when you...

Hi all, I had to replace one of my front tires so I ordered a new tire from the dealer. Checked with local farm tire dealers and none of them carried that size. When it arrived I noticed the tread...

Hi folks, I'm a reformed city slicker from southern California who finally found Jesus, escaped the concrete jungle, and I now find myself in the Northwest with 15 acres, 12 horses, 2 goats, a...

Hi folks, I'm a reformed city slicker from southern California who finally found Jesus, escaped the concrete jungle, and I now find myself in the Northwest with 15 acres, 12 horses, 2 goats, a...

I purchased the 1850BX approx 2 1/2 years ago and only use it to mow ( 160 ttl hours). Questions is this : During the last few mows it has developed a vibration throughout the tractor ( Not at...

I have located a 60-BX bagger but the boots available are for 54 and 60 inch decks and mine is a 48. Has anyone put one of these baggers on the newer BX1850? I figure that if I could see a newer...

A few months ago at 310 hrs my oil pressure light would flicker at idle, other than that no strange symptoms. Replaced the sender and it still does it so we put a gauge on it. 7.5 psi at idle...

Anybody know the diffrence between a RCH54-23BX and RCK54-22BX. I picked up a used RCK54-22BX deck off a BX2200 assuming it would fit my BX1850. I did not realize there was a diffrence until I...

I just recently finished building a cab for my bx to be used for snow blowing. It is easily removed with 10 bolts. It is a 3 sides cab, but I could close it all in totally if I choose to. I am...

I just recently finished building a cab for my bx to be used for snow blowing. It is easily removed with 10 bolts. It is a 3 sides cab, but I could close it all in totally if I choose to. I am...

I am interested in a 48" mid mount mower deck for BX. Must be 48", PM me. Thanks much.

As a fairly new owner of a Kubota I am not sure how well these little devils start but.... to me mine is a cold blooded beast. Yesterday temperatures in the middle 50's had been working it...

Went out to do a little spring (hopefully :) ) cleaning on the road today, little snowblowing and pushing with the FEL. Everything operated as normal. Pulled it back in the shop and when I idled...

I have done several searches and read posts about putting a block heater in the 30mm freeze plug behind the muffler. I have looked at my BX and question if there is enough room. Has any one...

Hi all, I am looking at an 06 BX1850 with 236 hrs on the clock. It has the FEL and a 54" MMM. Only items I have seen to check on are: Plastic deck ( operators floor board) cracks and there is...

from the dealer the other day and now I'm already tired of it. It just sits there and does nothing. I finally decided to chop up the remaining leaves and it did great. Now it's too wet and cold to...

Hi, Anybody have a wiring schematic for a BX 1850? Headlight circuit specifically. Washed the tractor yesterday and the headlights wouldn't come on today. Dash and tail lights do. I did check...

when i traded my bx1850 for a bx2360, i consigned a set of 4, front & rear Ag tires. haven't gotten a nibble from from anyone at dealer. i'd like to post on craigslis-. what is the resale value...

Thinking about trading my one year old 1850 with loader and 75hrs for 2360 with loader .Got two prices one is little over $4000 one is $5700. seems high to me for one year newer and one size...

Don't get me wrong I love my BX1850 , Kubota took care of one of its short comings the seat. The other I need help with. I don't have the most even lawn to cut , its pretty bumpy. Also when I used...

I am about to change the fuel filters on my Kubota BX1850 for the third time in only 20 hours. The second time I changed them, I completely drained the tank and put fresh diesel in from a...

guys, am amazed there wasn't a excessive thunder & lightening, a hurricane or a snow storm today, as . . . our new, year round, property boss was finally delivered (what a long journey!). my...

Currently I have a lawn tractor (JD X300) and a 1995 Kubota B7100. The kubota has a 60inch mmm,FEL,48 inch box scraper. I love this tractor but mowing without power steering or running the...

I have an opportunity to purchase a BX1850 through an auction. The problem is that it has a backhoe on it. This seems like a pretty small tractor to operate a backhoe. My question is will the...

Hi fellow machine lovers, I've been offered a Kubota BX1850 by a neighbor who has to move quickly. It seems in teriffic shape, I've seen him use it and he treats it gently; it's stored indors; it...

I currently own a 2wd 17hp grey market Yanmar which has been good to me. However, I am looking for something that can do more. I have been looking at Kubota B and BX models. I like the BX's...

Hey guys, I picked up a couple of furniture dollies from Harbor Freight for my bagger and mower. Large one for the bagger and small for the mower. They work great and cost less than $10! I only...

Posted this in the Kubota forum, but now I'm thinking this question fits better here. Just don't want to make a big mistake on a used DR PTO chipper. "Well, I found a used DR PTO chipper near...

Well, I found a used DR PTO chipper near me for sale and I'm going to look at it on Saturday. The question is, what can I expect for performance from my 13.7 PTO hp BX1850? The specs call for...

Just wondering if anyone knows whether the metal hood off of a 2660 or 1860 would fit my 2008 bx 1850. Baseball strike busted my hood!!! I rather have the metal hood anyway. If there is a 2660...

Im just curious how many people own a bx1850 on here. Im wanting to know your experience with them, good or bad. Will it do eveything you expected, have you found anything that it wouldn't do that...

I just finished installing some front and rear work lights on the ROPS of my BX1850. Here are some pictures of the installation and links to the components I used. The two switches, one for...

Looking for anyone to share their paid for price for a BX1850 w/loader and 54" mower + rear mount snow blower. What range should I look to pay? Thank you.

Has any body ran a rotary cutter on a bx1850 if so what make and model rotary cutter.

Guys, am going to have my driveway sealcoated this upcoming week (with at least one coat of tarnconite driveway sealer, and maybe a second if the price is right/like a commercial application)...

Is anyone out there with the RCK48 deck on their 1850? I am looking for gator, or anything better than OEM, blades for this and have not had too much success. Any feedback (or part numbers) from...

I received a quote on a new bx1850 with bar tires, 48 inch mmm, and a 60 inch hydraulic front blade for 10,900 total delieved to my house. How does this sound? Also I just noticed Kubota offers a...

gentlemen, i've never professed to being the sharpest knife in the drawer, especially with certain mechcanical things . . . anyway, i walked by my bx in our garage around noon and i saw that the...

friends and esteemed forum contributors, on a good day with the right amount of food and sleep, i might soar to the towering height of 5 ft 7 inches tall, with my namesake belly, seeing my...

Orange Believers, would like to seek your input on my bx deck questions. am renovating property in fall with turf type tall fescue. i intend to paint the underside of my new deck with slip...

folks, am trying to think through the idea of adding a carryall to the 3pt hitch of my bx. i'd like to add a plarform or medium depth box of between 10 and 17 cu/ft. i don't want to trailer...

Can a BX1850 handle a 48" rotary tiller? Can it handle a 6' C tine cultivator like this one? Tractor Supply Company - "C" Tine Cultivator Regarding min ground clearance, the Kubota spec page...

admittedly, i'm not the sharpest knife in the cheesesteak (HA!) but i'm interested in a counter-rotating tine tiller, and i saw somewhere that the befco is both a forward and counter rotating tine...

This is my first post on this forum, although I have been lurking here for quite a while. I am getting ready to purchase my first sub-compact and am looking at the BX1850 and the BX2350. I need...

I thought I would share details on my first tractor project. In January 2008, I took delivery of a great little Kubota BX1850 with the 54" plow. With all the snow we had here in Minnesota this...

at long last, my baby bx was delivered last night . . . with la203 fel,weight box, grill guard, 54" fine cut deck, and hd 60" front blade with cutting edge and squeegee edge. i was put through...

hey gang!, leave it to me to think about asking for the impossible. on 12/31/07 i got kubota financing for a new bx1850 w/54" f/c deck, hd60" blade and i consumated the deal with my dealer. i...

Does anyone know the length of a Bx1850 with the loader and bagger attached? I need to trailer one on a 6x10 trailer Thanks

I need help determining what hydraulic quick couplers to buy. I have a 2007 BX1850 and my first project is to add hydraulic angling capabilities to my Kubota manual angle blade (TG2754). I went...

I have plowed my lane for seven years with a atv. Just recently purchased a new BX1850 & sold the atv. I"m beginning to regret getting rid of the atv. I am using a rear mounted blade for moving...

devotees, i can't say why it took so long . . . but it did. i got my price on a new bx1850, turf, w/fel, weight box, 60" hd blade, 54" mmm. my dealer e:mailed my approval late this afternoon...

esteemed forum fellows, this is my week to committ to a new bx 1850 w/ loader valve, 54" fine cut mid mount mower and the heavy duty front blade w/ squeeegee and shoes. am guessing at the 12k...

I have a bx1850 with a 52" mmm and when I park it the mower deck settles (hydraulics bleed down). I have to set the height adjustment to top so that it doesn't settle when I park. The fluid level...

I found a used tiller - JD 450 Rotary Tiller - for 1K. http://www.deere.com/en_US/govsales/purchaseguide/PDFs/100_101.pdf It weighs just over 300 lb. and it has a slip clutch so I am thinking...

I just got my BX1850+54MMM+Loader+Ballest Box. Ok being an engineer, I bent my pride and i opened up the manual for the removal and installation of my mid mount mower. Something is just not right...

Hello All, I am new here. Have been lurking in the back ground and reading all I the post i could, so thanks, your experiences were fantastic for a new tractor buyer / owner. I thought I would...

i Have a new BX1850 and the new FEL is on the way. I was wondering if instead of buying the ballast box I could just liquid fill my tires and put a rear blade on it? I was looking at a king...

gentlemen, as i previously mentioned, i sold my toro zero turn, and am somewhat eager (wife is not), to replace it. my property, (1.5 acres) is oddly configured. a large triangle...

fellows, i took a deposit on my toro z master 100 yesterday, after a 3 week trial of listing on craigslist. i am saddened to see it go, however, i'm thrilled at now having the seed money...

Hello all -- After watching the board for the past year and buying a couple other machines, I finally pulled the trigger on a new BX1850 with 48" mower and the LA203 front end loader equipped...

I'm also new to tractors and hope to purchase my first one very soon. I've been given a price of $11,000 for a BX1850 which includes a front loader, a Woods RCC42, front grille guard and...

hi guys, am 53 year old newbie, need pricing advice on bx1850. am located in south eastern pa, and have 4 dealers 12 to 44 miles away. the lowest price came from a dealer who got slammed for...

If you bought an early version of the recent redesigns, here are the kits to make them equal to current production: Grip Kit (Kubota part number:K2581-9557-0) Contains all the plastic handles...

Wondering if anyone has a backhoe on their 1850. I see that kubota and woods both makes one to fit that horsepower of tractor, but didn't know if that horsepower of tractor would operate such a...

Does anyone know where I would need to tap into the hydraulic system on a new BX1850 to add a auxillary hydraulics like a top link? I'm pretty handy, but also pretty ignorant about hydraulucs.

Where does your temp gauge run on your BX1850....mine runs above halfway, and when I am cutting and doing some heavy work, or just extended time stuff it gets close to the red, but never gets in...

This week I received a quote on a BX1850 of $18,108. This includes the factory cab, 50" snowblower with elec. chute & deflector options, mulching kit, rear work light, block heater and alternator...

Hello all, long time, no speak. I am one of the few people that can say they bought too much tractor. I ended up seeding only about 2/3 acre of grass, and it is all slopes and oak trees. My...

I have 3 acres of rolling property that needs to be mowed approx twice a month during the rainy season (southern california). I would be mowing mainly weeds, and as long as I keep up on it I...

Let's try this again, I didn't put the title in my first try so probably won't get too many replies. I just received a quote today on a new BX1850. I'm still waiting to hear from another dealer...

does the bx1850 have an alternator std, as does the 2350 and bx24? If so where is the wiring harness to tap the lights into? thanks

I went to my local Kubota dealer yesterday to have a look at the sub compacts. I live on an apple orchard with with a 2 acre garden that I put about 30 rows of crops in with plastic mulch. I plan...

Please suggest width and make rototiller. I purchased a second smaller Kubota (Mini-me!) for my orchard and decided to buy a rototiller to go with it. The BX1850 has about 14 HP at the PTO. My...

I'm getting ready to buy very soon, and I have these two choices. For roughly the same price, I can get a BX1850 with FEL and 54" MMM or a new leftover BX2230 with FEL and 60". On the BX2230 I...

Does anyone know of a small sprayer unit for a BX1850? Preferably run off the PTO? I have a small orchard and 25-35 gallons or organic fertilizer, etc. is all I need. I have a L3010 but it...

Dear Forum: I am a complete beginner, so I apologize in advance for my lack of expertise. I am thinking about purchasing my first compact tractor. I am interested primarily in mowing and in...

Looking to purchase a BX1850 w/ FEL and 54" MM and received some quotes from a couple local dealers. Ranged from 11,700 to 12k. Wondering if they are inline with what folks have been seeing out...

My brother and I each bought a new bx1850 w/mmm / wght tires and loader. My brothers has 4hrs no issues ... mine on the other hand has been back to dealer for service(dealer MB tractor in NH is...

OK...so I am inches away from buying my new BX1850, 54" MMM, loader, cruise control and filled tires. It's actually sitting in my yard while I am negotiating with the dealer (he was supposed to...

I'm looking at a BX1850 and got quotes from 2 dealers: $10k for Tractor with FEL and turf tires $10,750 for Tractor with FEL, turf tires, weight box and grill guard Do the weight box and grill...

yesterday i went to the kubota dealer. i was quoted $11200 for a BX1850 with a loader did not have the mmm i live in california. is this a fair price?

Hello everyone, probably gonna buy new Kubota in the next few weeks and have gotten my first quote, but haven't sat down to negotiate. BX 1850, 48" box blade, 54"MMM, 60 " front blade, FEL...

buykubota-ML-872334-ML- Kubota specific thread.

I need a sanity check on a BX1850 with a 54” MMM and front brush guard. $8900 with one year no finance charges. Is this in the ball park? It seems like buying my L3010 was a lot easier...this one...

I am considering purchasing a Kabota BX series tractor with a loader and a snow blower. I would like input on which model (BX1850 versus BX2350) to purchase. I have 10 acres (mostly wooded) and...

buykubota-ML-866359-ML- Kubota specific post.

I'm looking at the Kubota BX1850, the New holland TZ18DA and the Case that appears to be the exact same as the NH with a different paint job. I need the loader and an mmm, probably 54". My...

Got a quote for the BX1850 with loader and 48" mmm $15995 Canadian. Too high? Good price? What do you all think?

For my small 1/2 ac lot, I'm wondering if a BX1500 with a fel would give me enough capacity to bring back a few dozen yards of material like topsoil, 3/4" drain rock, etc... The lot is flag...

http://www.kubota.com/f/products/bx1850.cfm and http://www.kubota.com/f/products/bx24.cfm