Hello TractorByNet Community! I am newly registered but have been stalking this site for years. I love the honesty and knowledge of the tractor owners on here. I am looking at buying a 2008...

Hello. I am trying to separate the transmission from the spacer transmission but it will not separate. How do I force the threebond gasket maker to release? Thanks.

Second problem this spring: My clutch isn't functioning smoothly/properly. I am having trouble getting into gears and switching from forward to reverse, etc. The machine is a 2004 Mahindra 4110...

Looking for a brand of backhoe still selling subframes for a 4110. Also has anyone tried to find a TYM or Kioti subframe that would fit? I know the frame is tym and the engine is Daedong (kioti).

Made quite a mess on my garage floor, the result of a leaking fuel filter or possibly a leak in one of the connected fuel lines... can't tell for certain yet. Can someone please explain to me the...

I am seeking lifters, push rods, and a rocker arm assembly with bolts for the Daedong 4A200 4 cylinder diesel engine in my 4110 tractor? The parts can be used or new. I have called a number of...

Hi, I’ve got a mahindra 4110. I’ve had it for years and literally never used the PTO. I’ve moved to a new property and bought a brush hog for it, but I can’t get the PTO to turn on. It blows...

My HSU steering control unit leaking can't be fix Orbitrol model #UBS120B08AWD Mahindra #16004072100 or 14484073100. Mahindra want $1,100 I know they make aftermarket for about $400 but can't fine...

Mahindra 4110

Hi, I've got a mahindra 4110 (Engine:41 hp PTO (claimed):33.6 hp). I was told by a local salesman that it wouldn't be powerful enough to cut and bale hay. Is anyone out there haying with a...

Tractor died, changed filter , will not fire even with ether. Turns over fine.

Good afternoon, Hope everyone is having a great afternoon. Got a question. I'm still learning about this tractor. I bought a 3pt log splitter this week. Hooked it up to the tractor at the...

Does anyone know why the Mahindra 4110 front metal pivot does not have a grease fitting? Anyone here with a Mahindra tractor 4110 or 3510 new sheet metal? Could you check your pivot and see if...

I purchased my 4110 in 2005, and decided to give a long term review. Not heavy use, almost 600 hrs. 4wd w/ front end loader. Overall happy, 16 years and it it still fires up and gets the job...

Good Afternoon, First to introduce myself I'm Herman. I just retired out of the US Air Force after a 27 year career. I have moved home to East Texas and I'm working with my father in laws 4110...

Changed fuel filter flushed line started and ran good after 15 to 20 minutes and lost power and slowed down and only run couple minutes filter looked OK . pulled filter apart drained fuel and...

I recently installed a hydraulic top link on my 2006 Mahindra. Unfortunately, I am unable to adjust it without stopping the tractor, standing up, turning around and trying to force the control arm...

I have a 2004 Mahindra and as of yesterday it won't start. If i turn the key i hear a relay chatter ( i think either the signal light one or another one beside that. If I turn on glow plugs a...

im looking at buying a mahindra 4110 with the ml112 loader, are worn pins a big deal to replace? ,and also where is the best place to buy loader pins to fit,Thanks.

I just had the clutch in my Mahindra 4110 replaced last fall. I used the tractor for mowing for about one hour. It died and the battery was weak, so I tried to pull start it. After one or two...

This problem actually started last fall and I messed with it for a little bit, then more or less put the tractor up for the winter and forgot about it until now. So here goes... While using the...

Need your help. I have had the dealer change it before but I have moved away and need to do it myself. How does the bowl come off, do I uncrew the top ring or does the bowl unscrew from the...

The left side engine grille sheet metal panel fell off my 4110 and got chewed-up in my bushwacker mower. I am looking for any kind of replacement. New or used in any usable condition. Would...

I found two tractors I'm going to look at and wanted some advise I found a 3940 hst Montana with 600 hours for 7000, and a 4110 Mahindra with a thousand hours for 9000 with blade and brush cutter...

Hello everyone! I'm hoping to have some good luck on this forum. I have a 2006 Mahindra 4110 (4 cylinder diesel). I had the number two cylinder bearing go bad and ruin the journal on the crank...

I'm back after 8 years away from TBN to ask one very important (to me) question: What size rotary cutter should I buy for my Mahindra 4110? :confused: Here's the whole story: The good wife and I...

unless you pull off the rear tire there is no way to get the metal case out-- unless you can take the two bolts that hold the plate in which the metal case is attached. Has anyone tried removing...

Can anyone tell me where you check the gear oil on the Mahindra 4110?

Since the weather has cooled off, I've noticed that I've had trouble getting my Mahindra 4110 to start. The normal start sequence is to turn the ignition key counter clockwise, at which point the...

Have a five year old Mahindra 4110 with 1,100 +/- hours. Recently when we were using the Farmi winch, engaging the PTO blew the fuse (which is connected to the ignition as well). We replaced the...

I ordered some parts for my 4110 for my Mahindra. Mahindra dealer PTO gears came with TYM marking on box. If, in fact, I am thinking right, would it be cheaper to order from TYM or Mahindra...

Need whole seat. my seat mounting bracket rusted away from mounting on tractor looking for something waterproof and easy on back and kidneys. all suggestions appreciated. You all have a happy...

I am looking to buy a Mahindra 4110. The problem is that there is a hole on the block at the first Cylinder. Everything else is great int the tractor. The oil and coolant is mixed in together...

Hi All, I'm new to the site and appreciate any help you all can offer. Thanks in advance. I have 2002 Mahindra 4110 with about 1500 hours and it threw a rod, I believe. The engine block is...

Hello All, I am looking at purchasing a flail mower to run behind our Mahindra 4110 tractor and I have an opinion question. What is the largest size of flail mower you would recommend for this...

I went to my three closest dealers (JD, Mahindra, Kioti) and told them I could pay max $20K cash for a machine and that I wanted the most tractor / loader I could get for that price. The three...

Which way does the long hub on the clutch disc for a Mahindra 4110 face, toward the flywheel or toward the release bearing?

4wheel drive lever moves but does not engage front axle through transfer case. Has anyone had this issue and is there a shear pin that could be broken?

The plastic fan fell apart(all blades shreaded like paper) after ten years of use...tractor overheated. I ordered a new one and having issues getting it on..Trying to figure out what wrench I can...

I have a 2004 Mahindra 4110 and it won't go into 1st or 2nd gear. 3rd and 4th work fine. So do the High, Medium, and Low ranges. I was running my roto-tiller when this problem occurred...

I am pretty mechanically inclined and have worked on almost every kind of vehicle there is, but i know there are hard learned lessons in every new job you take on. Has anyone done a split and...

I am using a borrowed Mahindra 4110 which is the same as a TYM 4110 from what I am reading. It is an Ok tractor. This one has a leaking oil seal on the right rear axle and only one wheel brakes...

Well, I've been looking to add a tractor to the fleet for a little while, had considered a larger Mahindra, and now I've settled on a 4110. Partly because it's basically the same size as my Kioti...

Several lubricant questions for my Mahindra 4110 newer model diesel 4wd tractor. 1. Is the fill plug for the rear hydraulic and transmission the same? - it appears to be a small 1" diameter flat...

Will a Bradco 11HD Backhoe fit my Mahindra 4110? And/or is it heavy enough/too light for the tractor? The used one I'm looking at has a PTO driven hydraulic pump and attaches to a sub frame on...

At first glance it seems like that is the case. But, I usually do things the hard way if I don't ask for advice. What is the best way to change all the lines? By the way, I am aware that diesel...

It's about an 02-03. Had water in fuel in June. Got over that. In Sept started dying out again. Checked fuel filter, looked dirty. Pulled out and couldn't find new one. Soooo, I'm a pretty smart...

Have an 04 model and all of the sudden I can't get into mid range, low and high are no problem.. Anyone else experienced this problem? I'm a do-it yourselfer and there are no obstructions on...

I have a Mahindra 4110 with FEL that is about 6 years old. It has 140 hours on it and has been serviced yearly since I don't put enough time on it to go by the hourly recommendation. When I...

I have a Mahindra 4110 with FEL that is about 6 years old. It has 140 hours on it and has been serviced yearly since I don't put enough time on it to go by the hourly recommendation. When I...

I have a mahindra 4110 and have already rebuild the front Diff. and now there is a poping and snapping noise when I move the 4WD lever to 4WD, this time it appears to be in the Trans., just...

FYI for anybody that might be interested in running the Tractor Supply Co. Countyline 3pt hitch log splitter with a Mahindra 4110 (and possibly other models). I paid $750 for the splitter and...

I bought a 3pt hitch log splitter to run behind my 4110, but neither I nor the dealer near me can find the male hydraulic hookups that fit the 4110 female couplers in the back of the tractor. The...

My mahindra 4110 overheats after 30 minutes of brushhogging. I have cleaned radiator and screens and have cleaned out both air filters all fluids are good. It still overheats quite quickly even...

I have a 2003 Mahindra 4110 with about 850 hours on it. I've owned it since new and the hours have been easy, mostly field mowing. I have a question concerning the clutch. While field mowing, I...

First of all hello, long time follower first time poster. Been an advid visitor since I purchased my Mahindra earlier this year. You guys seem to now your stuff so I hoping yall can help me out...

Hey all, Im trying to help a friend get the PTO on his Mahindra 4110 tractor to work. He bough it new about 10 years ago and it only has 358 hrs on it. The PTO stopped working. Indicators say its...

I just bought a used 4110 and the only problem I have is the tilt steering moves and does not lock in place. The foot leveler is stuck in the down position and I can't even force it up. I have the...

Hi Guys Trouble with the tranmission trying to go into two gears at the same,i took off the side plate and adjusted the gears back to nutural.Before this my son backed up with it and heard a loud...

The 4110 is my dad's. He saw me un-curl my bucket & drag dirt backwards with it the other day. My bucket stays put wherever I un-curl it to, including when pushing down very hard & dragging...

Hey Ya'll Looking at a new, old stock, Mahindra 4110 w/ FEL for $17,500. Looking for opinions. Thanks, William in Plum Branch, S.C.

Hey Ya'll, New member here, gotten a lot of info from this site and since I'm now thinking seriously of buying a tractor , figured I'd go ahead and join. I live on 10 acres approx. half of...

This is my first time so I hope this works. I have a 05 mahindra 4110 with about 600 hrs. Lately with the warm weather and working it the rpm starts to jump up and down afew times and then stalls...

My wife and I are considering the purchase of a new tractor this fall. After some research on line I went to a local dealer that sells Deere, Kubota, and Mahindra to ask some questions. It...

I just got a used Mahindra 4110 with the standard loader. Previous owner didn't get the Skid Steer compatible option. I really need a pair of pallet fork to help with my home construction. Am I...

Hello, I have looked and googled but I can't find what I am looking for. I am trying to find out what the ground speed of these two tractors is. I am wondering if the 4110 with 12 gears has a...

Any of you guys know what the going price is on a 4110 with FEL and backhoe, all Mahinra stuff. About 3 years old. Very good condition, but not like new.Has a dent on hood, black molding on rear...

Looking for a shop/repair manual for a Mahindra 4110. I have had no luck on the net so far, anyone have any ideas on where to get one?

I am looking at a new 2008 Mahindra 4110 with loader and a set of woods pallet forks,is $20,900 a fair price for this package?Thanks,coobie

I currently own a massey ferg.1240 4X4 28 hp and want to step up to a bigger HP tractor.I have been pricing the Mahindra 4110 with skid steer bucket the price is $20,900 the kubota 3940 grand L...

I currently own a massey ferg.1240 4X4 28hp. and want to step up to bigger HP tractor.I have been pricing the mahindra 4110 with skid steer bucket price is $20,900 the kubota 3940 grand L with...

Now this is a hard one, Mahindra 4110 12 x12 4WD $ 21000 3510 12x12 4WD $ 20900 vs. JD 3520 hydro, 4WD $21900...

I have a 1999 MF 1250. After looking at multiple pictures of a 4110, it seems like it is just like a MF 1250. The same instrument cluster, same tilt steering wheel, same looking from the rear...

Looking for experience, suggestions or simply a really good kit for adding front auxiliary hydraulics & control valve to my 2004 Mahindra 4110. The initial intent is to add an aftermarket grapple...

Just went over to TYM site. Not sure which, but it was the one with 0% interest for selected models. Question; which TYM is the sister to the 4110? One thing interesting over there. I was able...

Howdy all, I'm about to purchase my first tractor. I'm leaning toward either a used 2002 4500-2WD w/FEL or a used 2002 4110 w/FEL. I'm leaning more toward the 4110 because of the lower weight of...

Hello to all! This is newbie's first tractor. I purchased 55 acres in Tennessee that I will be haying, mowing, and cleanup/clearing. Land terrain is rolling with steep inclines leading down to...

What oil filter are you guys using on the Mahindra 4110. It is about time to change filters/fluids. I don't want to go back to the dealership to get filters. I hope someone has another brand and...

Hello everyone, i have a question regarding the pump output on a 4110 Mahindra. It puts out around 9 gallons per minute. I was wondering if there is anything i can do to uprade this? Thank you...

I just phoned a dealer that I've been to a couple times and he said that they had a used mahindra with FEL for $14,900. It has a little over 600 hrs on it. I think that is is 2 maybe 3 years...

I looked at both these tractors. Looks like either would work for me. The mahindra seemed to have a much smoother engine and somewhat "beefier" build. The kioti has better spec on the hydraulics...

What kind of price should I expect to encounter for a Mahindra 4110 w/FEL and R1 ag tires?

What is a fair price for a new Mahindra 4110, tractor only? I have been quoted a prices from $15825 to $16570. Is those prices in range or do they still have some moving room? Interested in...

I would like to add a hydraulic top link to my 3 point hitch, replacing the manual top link. My question is, where can I buy this hydraulic top link? I hope that I can hook it up to the rear...

Hi Guys, Talked to you earlier about buying this machine. Its a workhorse, but I have my first minor problem. Being a first time tractor owner I need some info. I just bought a Mahindra 4110...

First time tractor owner,just bought a used mahindra 4110 with FEL, 4wd and R4 tires, have been removing a hill from the side of my house and filling in a pond with the dirt.have 8 hours doing...

I have been looking for a CUT for some time, and have just looked at the 4110, is this really as good of a tractor as i think it is, test drove and found it very nice, the engine is daedong...

Ok folks...I still need more of your endless wisdom. I am looking at a NH TC40 vs. Mahindra 4110 About the same price 18+k w/ FEL the NH is a 03 model...but new and the Mahindra is a 04 model. I...

Ok folks...I still need more of your endless wisdom. I am looking at a NH TC40 vs. Mahindra 4110 About the same price 18+k w/ FEL the NH is a 03 model...but new and the Mahindra is a 04 model...

I'm the new guy, and have some questions. I've been doing a lot of looking around. New tractors are a little more than what I'd like to pay but used ones are so hard to find. I'm wondering what...

Looking at buying a 4110 with a loader. Will this tractor handle round bales of hay in the 800-1000 lb range. Thanks.

I had a problem with the pto on my Mahindra 4110 today and was wondering if anyone else has had any problems. It has been about 2 weeks since I have used the pto and I had some bushhogging I...

Anybody have experience with dealer cost for 50 hr service? I'm trying to decide whether to do it myself or take it back to the dealer (still quite a few hours to go, just doing some planning!).

mahindra-ML-254631-ML- Moved to Mahindra Forum.

Just bought a new Mahindra 4110 w/FEL, disc, blade and PHD. Since it was delivered late this afternoon to my soon "hopefully" new homestead about 20 mi outside San Antonio, I only got an hour or...

mahindra-ML-250503-ML- Moved to Mahindra Forum.

Attached is a pic of my new Mahindra 4110. This is my first new tractor. I had a Ford 4000 gas burner and got all the good out of it I could before I traded it for this. Man I am impressed with...