Im trying to determine the best way to add power steering to my 1020, whether it be retrofitting something or tracking down a factory setup. If anyone has pics of the powersteering setup on their...

HI everybody, new to forum. Is there a replacement gas cap part# 72104840 available, or a equivalent to buy? Thanks, Kyle

I am looking for the right hand front axle for a 4x4 Massey Ferguson 1020 or 1030, does anyone have a parts tractor or a good source on compact Massey parts? Thank

I have a 1992 MF 1020 that uses 10/30 oil. Where I live I can only find synthetic oil. My question, is it ok to use synthetic in this tractor, thanks?

Just installed a new regulator on tractor today and miraculously it worked. Due to no parts available from MF I ordered one for a JD 650, had to really push the plugs together but it worked and...

I am looking for a lower support arm for the right side of a Massey Ferguson 1020 4x4

I'm looking for some pictures of the parking brake pawl for a MF 1020, which is located right above the clutch pedal, preferably both with the parking brake lever in the on and off positions, but...

Hello, hopefully some on here can point me in the right direction. Over this past winter the tractor became harder and harder to start until it just would not start. I found cloudy looking fuel...

I am looking for an alternator for my Massey Ferguson 1020. Where can I find one or are there any alternatives that will work? Thanks, 1Tom

I'm unsure of the year, but my MF 1020 started leaking oil out of a plastic plug today on the side of the bellhousing. The plug was loose and cracked. It seems odd that a simple plastic plug could...

My Grandfather recently passed away, leaving behind his immaculate 1989 MF-1020. When I say immaculate... he literally washed and waxed it after every use and I couldn't even believe it was a...

I am trying to source a MF 1014 loader for my 1020 tractor. I am to the point of perhaps having one fabricated. Would anyone like to share with me pictures of the loader frame bolted onto the...

I got a good running and working MF 1020. I also own a 1010. I love both of the tractors. Easy to trailer on my car trailer and handle all the small implements. The Tractor must have been used to...

I have a massey 1020 with with a 6 wire (red,yellow,green,black, blue and blue)voltage regulator pn-RS5104 and a 2 wire alternator pn-GP9153. The 2 blue wires on the voltage regulator connect to...

Checked with local AGCO dealer for fuel cap for MF 1020 and part is no longer available. They directed me to other dealers that showed the part in stock but still no luck. Part numbers are...

Hello, I am working on rebuilding my MS142 engine and I seem to be running into a wall finding parts. I am trying to find a source for the bottom end bearings, specifically the rod bearings...

I have a Massey Ferguson 1020. I need a 4X4 front end for it. Do you no of any for sale or other tractors that match? Thanks Mike

I have a 1020 Massey Ferguson Tractor that has slip out of four wheel drive and I am not able to get it back into four wheel drive. Also, the ignition switch has come apart, I was able to put it...

Does anyone have a diagram of a massey ferguson 2962 series tractor parking brake. I just bought this tractor and the parking brake spring that attaches to the lever is off and I can't seem to...

I have a 1986 massey ferguson , mf 1020 4 x 4 with a front end loader and hydrostatic tranny. I have lost all hydraulic lift at both the laoder and the three point hitch and lost the power...

What type of oil does the Massey Ferguson 1020 use in the crankcase? Also, what filter type? (I cannot locate my Owner's Manual.)

I have a MF 1020 hydro tractor. Need part numbers for the two hydraulic filters. Thanks

this is my First Post. I have recently bought a 1020 Massey Ferguson with low hrs, seems to be in good condition. but I noticed a slow leak of Hydraulic fluid from the rear axle. It appears to be...

when i depress clutch i cannot put tractor in gear I thought a bad clutch would not let tractor move but it appears just the opposite and it does not disegage the engine from the transmission

Hey guys I have a mf 1020 diesel 4wd, it has been sitting for a few years, it had water in the fuel so i drained it, put fresh fuel drained bowl bled out old fuel it is running now, but the...

Have a MF 1020 and the starter will not engage. Gear selector is in S. PTO is off. Is there another starter cut-out?Battery has good charge & glow plugs are pulling a load. Elec system is...

Hello, New to the forum. Need a little help with a 1990 MF 1020, 4x4 Hydro trans tractor. I need to chance the hydro filters and fluid in the tractor. I can find specs for the filters and get...

Help! Trying to get parts for front axel of MF 1020 FWD Seals, bearings etc. Am in UK, but if shipping is reasonable will buy from overseas to avoid scrapping cherished tractor. email...

Just purchased a 1985 1020 and need to replace the battery. It appears that the old battery had been installed with positive ground. Is this correct?

Massey Ferguson 1020 lift stopped working and I need to know what kind of oil the lift uses so I can change hydrolic oil and filter. I am told this might be the problem.

Hey today I tried to lift a round bale of hay with my tractor I guess that's to much for it since I bent both lift cylinders anyone know a place or if I can put bigger lift cylinders to make...

Howdy All, Im a newb to all things Tractors but trying to get my feet wet. I am hoping to hear some recommendations on 3ph tiller attachments for a MF 1020. Its got a 21 hp with a PTO HP rating...

I bought this tractor & by accident I disengaged the 4 wd. I need to learn how to engage it.

Just purchased a 1992 Massey ferguson 1020 gear drive 4wd with 1014 loader seems to be a very stout little tractor . Any pros cons to share on this tractor any info is appreciated

My Massey needs to be rebuilt . It has a Toyosha-CS112 and I'm having troubles finding parts online . I'm looking for any information that I can get on this. (places to look for parts,other...

My Massey needs to be rebuilt . It has a Toyosha-CS112 and I'm having troubles finding parts online . I'm looking for any information that I can get on this. (places to look for parts,other...

I'm trying to locate a voltage regulator for MF 1020 standard 2wd. I tried ordering one from a massey ferguson dealer, but they were unable to find one. If anyone can help I would greatly...

i keep shearing key on steering shaft i am considering drilling shaft to insert 1/4 in compression pin to replaace key any recomendations or someone who has had similiar trouble

i keep breaking key on steering shaft i am considering drilling shart and installing compression pin??? any suggestions thks

I need to drop the drive shaft for the four wheel drive so I can remove the oil pan. I have a manual ordered but wont have it for a few days.:mad: I don't have the patience to wait for it . This...

CAN SOMEBODY LEAD ME IN THE RIGHT DIRECTION ON A GOOD PLACE TO GET MASSEY PARTS. I'M LOOKING FOR FILTERS,GLOW PLUGS,ECT. DON,T WANT TO SOUND LAZY AND NOT LOOK FOR MY OWN PARTS BUT I SPEND HOURS...

I've been trying to get a book for my Deutz 5220 Hydro. The MF 1020 is the same. I ordered 2 books from different Companies and each time they send me a flipping gear drive book. Is there anyplace...

There seems to be alot more parts available for the MF 1020 then the Deutz Allis 5220. However, everytime I look around it keeps coming back they are the same tractor. Mine is 5220 Hydro, 21hp...

I have a 1985 Massey Ferguson 1020. I would like to know if there is a pair of hydrolic points that i can get to so i could atach a loader onto:laughing: if you could tell me a way to find them...

Looking for the part numbers for the hydro filters on a 1990 Massey Ferguson 1020 hydro trans 4x4. There are 2 filters. Any idea on a filter number. The dealer quoted me $136 per filter. They...

Hi, I am having problems finding part numbers/alternatives for the Hydraulic and hydrostatic oil filters and also an equivalent to the recomended Permatran 3 oil. Any help greatly apreciated. Nick

Buying a property in which the current owner has a MF 1020 with Turf tires and a 5ft finish mower (don't know the maker). Tractor has around 1400 hrs on it. I also have no idea what year it was...

I have a M-F 1020 and can't locate the Hydraulic reservoir, have the Operators Manual but it doesn't show the reservior.

Trouble with my little guy, my hydraulics and FEL won't work. At first it was just when it started up and would "kick in" after a minute or so. That happened a coupla times and the next time it...

I'm new to this. I have a MF 1020 with FEL MF1014. I want to add a backhoe but haven't been able to figure out what would fit this tractor. There is a MF 3165 tractor (blown motor) with backhoe...

Looking for some turf rims for my 1020. I have ag rims and tires at the moment. and would be willing to trade or buy a set of turf rims and/or tires if anyone has any laying around. I live...

I have asked this question before, but I can't remember where so I can't find the answer. I have a MF-1020 HST and I am looking to put a FEL on it. I am only going to do yard work, so I am not...

I am looking for engine parts for a 1987 MF 1020 with a Toyosha cs112. Any help would be greatly appreciated.

I have bought a used MF-1020. It does not have a FEL. I am thinking about adding one for light duty work around the house. Any suggestions? I have used large backhoes etc so I know how to...

I recently purchased a MF-1020. Serial # 01998. Does anyone know the year it was made? Is the pto live? It has a hydro Trans. Is that any good? I paid $3900.00 for it is that a fair price? It...

i have found a mf 1020 4wd with 90 original hours. The lady wants 3500.00 for it and I am in the landscaping biz. Will this tractor perform well, i know it will pull a 3pt hitch aerator but how...

I am new to the board and I have a favor to ask. I do not know much about tractors but I need one and ran across a used 1020 with about 400 hours on it. They are including a finishing mower and...

I own a '93 MF 1020 Standard in very good condition except the decals... Does anyone know where I can find a complete set of decals for this tractor?? And maybe the approximate costs? Thanks for...

massey ferguson 1020 won\'t shut off when ever the key is shut off the tractor keeps running any suggestions on what is causing this and the cure

does anyone have any experience with a massey ferguson 1020? i have the opurtunity to purchase one for around $2500. it is 2wd and has a front grader blade on it and only has about 600 hours on...

Anyone with info on a mf1020 2wd? - Looking at this little tractor, 682 hours, hydraulic dozer blade on front and tire chains, been garaged untill about a year ago, sheet metal is great on the...

Any one ever hear of a MF 1020? Who makes it, and are parts avalble for this? Also how much would a FEL increase a price of a used tractor? Thanks.