I have a X500 with 330 hours that will not start when it is hot, until it cools off - then it will start. I have removed and cleaned the fuel tank, replaced the fuel filter, replaced the fuel...
I bought a 2012 X500 and it didn稚 have the deck leveling gauge. I can稚 find a part number anywhere.
The deck adjustment knob shows the deck should be in the 2.5 position for leveling. Does that...
I purchased a 2012 X500 recently and I am looking for a wrench to level the deck. I found part number M162737 but it says if for 090 and newer serial numbers, my serial number starts with 070...
Real long shot here, need a hood for my X500. That **** differential lock will make you try to go places you shouldn’t. Flopped mine over & other than being sore all over, hood seem to take the...
I picked up one of these new for about 2/3 of the regular price (the store had it marked at the wrong price and I had a 10% off coupon). With lots of leaves to deal with I had thought about the...
serial # above A030000. Has combo fuel gage-hour meter. fuel gage works. Hour meter (.) will blink sometimes for 3-8 times, then stops. Have traced wires to connector and all have voltage, Blk. is...
I have read several statements that the older models were better because the bean counters got involved and started looking into shortcuts to increase profit margin. Someone else claims the newer...
My JD X500 was purchased in 7/2013. and now has 300 hours. Mower repeatedly shuts off while mowing and backfires; sometimes cranks back up and sometimes need to wait 10 - 15 minutes for engine to...
Hey all,
I have a 2015 John Deere x500. Went to change the oil today and noticed something very strange. The salesmen looked up my tractor via his computer and my product ID number. He provided...
My 2006 L120 is still running good but I am looking to get a newer model. I want power steering, 48" deck and real bearings in the front wheels, not bushings. The parts guy said the X390 had...
I知 posting this so people that were wondering like myself was if bigger front tires would fit on an X500. I recently bought a used X500 with 426hrs on it because i sold my Kubota BX that i used to...
Hey y'all! I just picked up a 2012 X500 w/54 inch deck and "a crack" in the hood. Turns out the crack is actually the plenum broken loose from the hood itself. May have cracked at the mounting...
Has anyone seen this before? I was mowing for the first time this season and the steering wheel broke. I wasn't putting any real pressure on it. I'll call the dealer tomorrow, I don't see why...
I've been struggling with the quality of cut from a 54in edge deck/ 2015 X500 for over two years. Stopped at Deere residential dealership (vs my ag dealer) to pick up some fluids this winter and...
Hi everyone,
I am new to this site but have enjoyed looking at all the various comments regarding lawn and garden tractors. I recently purchased a used x500 John Deere tractor and am thinking...
Hi everyone,
I am new to this site but have enjoyed looking at all the various comments regarding lawn and garden tractors. I recently purchased a used x500 John Deere tractor and am thinking...
Hi all,
I recently changed my transmission fluid in my new x590. I followed the instructions when filling, and filled only to the "Check cold mark" and ran it around for 15 mins or so, came back...
Greetings all,
My X500 has the Kanzaki K72B transmission and when the transmission oil gets hot after approx one hour of lawn mowing there is a noticeable loss of power in forward drive. The...
Hi all,
I'm new to this forum. I've actually used this website forum for research over the last couple of years - mainly to troubleshoot my JD L130 transmission problems. Last year, my L130...
My X500 with the 48x deck has mulching blades (Deere P/N M127673). I haven't found the part number but the lip on the edge of the blade doesn't seam to have much of a lip. Also the sharpened...
As I said I'm thnking about picking up an X500. I've found a couple not too far away with less than 100 hours that look like new. Right now I'm using a Lowes MTD special (Troy Built Super...
Yes I know, I'm asking way too many questions for the "new guy". Sorry...
Ok I got a 44" blade off a x300 to go on my x500. It has the front mounting bracket, the blade, and a long link to go...
I'm new to the forum here, but my Dad has been on here forever and I've been a lurker. I just a picked up a 2014 x500. I got a 44" blade off a x300 that will work on it. I just have a couple...
I've been posting on here a lot lately. I just bought a used X500 earlier this year that was a 2007 model but in great shape with only 225 hours on it. I like many noticed that the fuel gauge...
All,
Like many I've seen on the forums, I too hated the low power stock headlights on the John Deere X500 tractors. I searched these forums for an LED replacement solution with higher lumens but...
Unit is 2 years old, sitting at 28hrs. 54 in deck has never cut well. Seems to be a combination of issues but mainly the grass height is grossly uneven across the right (grass chute exit)...
Traded 2009 JD X500 for new Simplicity Prestige due to Suspension brackets and bolts on 54 inch Deck on JD X500 replaced for third time. Plastic hood on JD developed cracks. Prestige is metal...
Is there any good mechanics out there that can work on a JD X500?
The problem that I am having is that My tractor runs for about a hour that it cuts out I tried to chock it and that works for...
We moved to a new home about a year ago and now have a 1+ acre lot with about 3/4 acre to mow. I've been doing it with a push mower up until now so needless to say I'm ready for a change. I've...
Hi gents/ladies ~ I am in the market to purchase a life-long tractor for my 1+ acre property (mostly hilly terrain with very little obstacles). Was offered a deal from a JD dealer to buy a new...
So I just got quotes for 2 left over 2015 X500s in both decks. $5700 for 48" and $6000 for 54" deck. Quotes were msrp minus current $500 incentive.
Everyone post good reviews of these mowers...
I'm looking for a new lawn tractor for 1-2 acres of hilly and uneven lawn with fruit trees, gardens and areas with barnyard grasses. I had a Craftsman Pro for 8 years and wore out the transmission...
After 31 years and being passed on through 3 generations, I have decided to semi retire my Kubota G5200 with a 44 inch deck. The New Kubota Garden tractors don't interest me, but the x series John...
The foot lift to bring up the mower deck does not seem to be lifting as high as it should. Problem seemed to start when I removed the snow blower attachment at the end of the winter. The mower...
I have a X500 - great tractor except for one really big issue. Sometimes the tractor runs just fine. Other times, usually after about 15 minutes or so, tractor will begin surging and stall under...
]When I try to level my 54 in deck on my x500 if I back off the rear adj nuts the deck will not drop on to the stops.And now it won`t lock in transport position. I bought it used , might have a lemon:
Hi everyone,
I am a new member as of today Jan 27, 2015. I started reading posts here the summer of 2014.. I googled tuff torq K46 and found this forum. As I started reading I felt that gut...
Someone is selling a 14 bushel bagger setup, but they had it on a 54" deck, x540. I have an x500 with 48". Does anyone know the difference between the blowers for the two size decks? According...
Here is a pic of a new way my x500 is helping out.
The clamp is pushing the 'bow' out of the 1x4 so I can screw it to the studs.
(the studs are the start of exterior insulation on the walk-out...
Anyone with experience know if an x500 has the sack and ability to rip up a gravel drive? I need to rip my top layer to repair pot holes that I'm tired of patching. Thanks
Just thought you boys might want to see my new X500 with a couple extras -- I put the HDAP tires on myself and also added the tach on the dash - it's idling in the pic after I figured out how to...
Hi all. Couldn't find any previous posts on adjusting the idle of an X500. Does anyone know how to do this? I easily find the 2 screws in front -- one limits the upper throttle travel and the...
I'm looking at getting a jd tractor that can rototill / blow snow within the next two years. Is the cornering / steering that much of a difference between the x500 and the x534?
Looking for feedback on John Deere X500. I looked at the X320 & X500 at local dealer the other day. I might go back on the weekend and test drive. My scenario is strictly for mowing (I have larger...
I think I finally bought the right mower for my yard! My backyard is on a hill and it can be a challenge to cut. When I moved in, I had an L110 which I realized was not going to last, so before...
Has anyone ever replaced the steering/sector gear on an X500 or similar. The steering went out on me in the middle of mowing yesterday. I took the deck off and looked underneath. The center teeth...
John Deere makes a mulch kit for the 48" deck for x500 that closes off the discharge etc. Would love to hear how much grass it can handle from x500 owners or from owners with similar tractors...
I just purchased a 2013 X500. I have 7 hrs on it so far. It works great, starts easily and runs smooth. The only thing out of the ordinary is the engine makes a sort of ticking sound like a valve...
I've been looking into getting a bigger, stronger tractor that I could use to plow snow, and haul our 15 cu.ft cart with firewood, and possibly mow. Also, I am getting addicted to John Deere lawn...
I have a X500 and it will do everything I ask it to do Just wish I would have gotten the x540 for the hydraulics. Is there a way that I can put hydraulics on the 500 without to many problems...
What is the proper way to change transaxle oil and filter (if needed), on the JD X500?
On the X500, do you have to remove the deck? Owners manual a little vague on the 500.
I have been told that...
Just found this sight and look forward to reading all about my new lawnmower..
From my purchase research this is good mower, now to get to the finer details and the proper application of it in my...
Thanks for the input on 320 vs 500.
I have decided on the X500 family. However, I am starting to think that in 9 years or so (other side of 70) that the hyd lift for the mower deck and really...
I am looking to replace my cub cadet 2185 with a deere.
I have been to two dealers and one suggested a x320 and the other x500. I have 3/4 acre to mow but a lot of snow to move. I need to blow...
Hello,
I'm new to this forum, but I've been reading a lot of posts to get up to speed. I will be purchasing a house soon with approximately 3 acres, 2 of which is wooded, so only 1 acre to mow...
After many months of research and comparisons, I have decided that my 1.1 acres of hills, slopes and rough terrain (property is a three tiered lot on a ridge) needs something more than the X300...
Which is the better seat?
I see John Deere has a smaller seat with an opening on the bottom, so it has 2 separate cushions. I have also seen a few machines with a larger one piece seat.
Also, I...
Should I buy the x500 and spend the $1,700 difference between it and the 540 on accessories, or bite the bullet and buy the 540? Just wondering if the 540 can do anything the 500 can't.
I FINALLY TOOK DELIVERY ON MAY 10TH AND I LOVE IT. HOWEVER BEFORE I HAD .5 HRS ON IT I RAN OVER A NAIL IN THE GRASS AND FLATTENED MY RIGHT FRONT TIRE. WENT DOWN TODAY AND HAD A TUBE PUT IN IT. I...
Well, my income tax is done and I can finally afford the mower I have wanted. Have narrowed it down to either the x500, x530, or x540. Just wondered if there is any fuel economy information on...
Hi everyone,
Does anyone know the towing capacity of the X500?
I've poked around the john deere website but I can't find the answer anywhere.
I'm looking to build a decent-sized lawn roller...
Just about settled on buying an x500. Just wonder what I can do with it besides mow. Can I pull a plow, tiller, etc? Wondering if I should bite the bullet and by an x700, but by the time I outfit...
Does anyone own an X500 series garden tractor? If so, how is it on hills, rate of cut, etc.? Trying to figure whether to buy one or a Zero Turn. Not overly impressed with the JD dealer here. He...
Hi all - new to the site, wonderful content. My riding lawnmower gave up at the end of last season, and now that we're getting toward spring, I'm thinking about what I would like to replace it...
I am considering a blower for my 2010 JD X500 and I'm interested in hearing about your experiences, opinions and knowledge related to the JD 44" snow blower attachment or other brands you think I...
Hey all...first post, but this site has been so helpful in my research for a new tractor so far. Thank you. I have come across a 2007 x500 48" with about 150hrs on it for $3800. Looks to be in...
Anyone here on TBN add a 3-point hitch to their current generation x500 series? If so, did you fab it yourself or use something like the Kolpin dirtworks. Interested in photos either way.
Hi folks,
I'm finally moving to a larger tractor (4310), now that we're ready to take on more of the outdoor tasks in our new place.
I've got my '08 X500 on eBay but I probably should have done...
Does anyone know can the x300 42" deck mount on the x500? I have a x300 with a 42" deck and the neighbor has a x500 with a 48" deck. He wants the 42" on the x500 and I want the 48" on the x300...
Hello all, wanted to start off by saying I love the site and have learned a lot just from browsing the last few days. Thanks in advance for any and all help here.
So I have just bought an old...
Hello all, wanted to start off by saying I love the site and have learned a lot just from browsing the last few days. Thanks in advance for any and all help here.
So I have just bought an old...
I am in the market for a new ride on tractor, I want something that can cut grass assist with the leaves, and either plow snow or a snowthrower attachment. I have read good reviews of the jdx500...
I recently bought a X500 with the 54" deck to replace my tried and true JD 140 of 30 years. Right now I'm not so sure I wouldn't have been more satified with a complete restoration/repowering of...
What are the pros/cons of these two tractors. The 445 has about 400 hours on it while the X500 has 130 hours. Both are in excellent condition. It will initially be used for mowing(2 acres), snow...
Been looking for a tractor for a couples of months now and came across an 07 X540 at a JD dealer that was owned by the owner. It is in great shape with only 87 hours and they are asking $4,800...
Hi, My local dealer has a x500 with 195 hours with a snowblower for $5500. Does this sound like a good deal? I am a little worried about the hours. How long do these models go if taken care of...
My L120 has finally bitten the dust. The transmission is shot and it has a leaking head gasket. Bot in 03, now has 485 hours on it. I really can't complain too much as I beat the **** out of that...
Hi folks,
I bought an X500 that came with the 2-bag power flow grass bagger. I'm on a major clean-out-the-garage kick - anything I'm not using is being sold. Since I haven't been using the...
Hello Folks,
I have an X500. I need some advice. My family and I will be going on a 7 day holiday out of town. There have been some thefts in our area and I just want to make sure that if...
I have recently moved to a rural area of Nova Scotia, purchased an acre property on top of a hill over looking the valley. Yard is a mess of tress, gardens and some steep hilly lawn. Need help...
I bought an X500 a few days ago and I've found that it rolls forward quite easily when my foot is off the pedals, and it's on any kind of a slope. I realize that most hydros creep forward on a...
:confused:
First of all - great, but dangerous forum. I haven't received any responses to this on the JD forum, so I figure I'll try this more general forum, as it applies to new vs used...
OK...so here goes my predicament.
I just purchased a home...2.6 acres..about half grass....half wooded...
I have a stone driveway that is about 200 yards long...grass on both sides but it has...
First of all - great, but dangerous forum.
I started this thread asking about the X300 series, but due to everyone's input, I think I've worked my way up to the X500 series. Thanks to all for...
There was a recent thread about the x500 vs the x700 that turned into a discussion about past, and present x700 equivalants. I'm still curious about how folks like the current X500 series, how...
Spring is here, and I've thouhgt a bit about a new mower. I would like input from any of you that have the new JD X500 series riding mowers. How well do you like them, and how are the attachments...
Hi all,
I am looking for a first tractor for a new proprerty of about 10 acres, with 3 acres to regularly mow. The property is in great shape and I am looking for a mower (which is what I will...
Hello all,
I have about 3 acres to mow and am looking at the x500 with a 54" deck as a first tractor. The primary use will be mowing, but maybe some light towing of a cart, maybe a blade for...
One other question on the X series tractors. Yesterday I was at the JD dealer and when starting up the X500 and X540, blue smoke came out of the exaust for a second or two. Is this normal on brand...
Hi all. I'm pretty close to purchasing a JD X500 or X540. What I really want is a 2320 but can't afford it right now. My immediate needs are cutting 2 acres of lawn but would like to also snow...
Hi,
Am considering purchase of a Deere x500 or x700 series tractor. I'd appreciate hearing whether folks think all wheel steering is a big benefit (unfortunately, it looks like it only comes...
I will be cutting a little over two acres of smooth and semi-rough land. I have my mind set on a 54' cut x500 series tractor by JD. I know this might be a little over kill for only 2 acres but I...
I'm considering a purchase of an x500 or x700 series and wonder if any of you have some input to share on their utility, value, and ground clearance. I am currently using a Craftsman...
Just thought I would let everyone know -- Deere updated their website last night to add the X500's:
http://www.deere.com/en_US/ProductCatalog/HO/series/ho_x500_series.html
I found this little tidbit on Deere's site today:
http://www.deere.com/en_US/govsales/purchaseguide/2006PG/TOC.pdf
ADDED IN EDIT:
Well the whole thing was there earlier, but now I can only get...
I have been looking at a JD X595 with a FEL. This tractor has a single range transmission and I was concerned that without a low range there might be some using the FEL. Has anyone had...
I will open by acknowledging that I own a BX1800 and so I'm hooked on Kubota. The purpose of my post is to share an observation. This past weekend I stopped by the John Deere dealer in my area...