Workmaster 65
Model Year: 2011
I have a Workmaster 65 2011 sitting with no starting at 392 hours . So far, I had the shift neutral switch go bad (shorted around it), the seat switch routed over the rail went open (spliced), the starter solenoid wire routed over an exhausted ground out fuse blown (re routed, taped burnt wire, and replaced the fuse), and the 625TL loader roll cylinder is leaking (I have not fixed it yet).
Pros: When it runs, it works well enough
Cons: Would like to not worry about it stopping and not starting again for a couple days while I work on it