My Harbor Freight Quick Hitch

[Donkey Shade Farm]

Where is everyone getting the HF coupons from? I've made small purchases from them over the years and get their catalogs regularly but have yet to see any coupons in the mail.

 

[The Dougster]

Get your email address in their system... I get offended if I don't get some sale/coupon offer from the 2-3 times a week... lol

 

[shakin]

usually on the back page of their flyers there is an offer for free suff like tool bags and such, and sometimes the offer coupons for a set amount or % off the total price. although i have a mag right here beside me and there is no coupons on this one. i too have been thinking about trying one of these if it makes it quicker to change imolements.

 

[Builder]

What's the weight limit on the HF q/h? I have a pretty heavy 90" Landpride power rake. The Landpride q/h version is real expensive.

 

[tnhomestead]

Also a site online that offers the coupons,just do agoogle on harbor freight coupons!

 

[JohnDeere4300]

Where is everyone getting the HF coupons from? I've made small purchases from them over the years and get their catalogs regularly but have yet to see any coupons in the mail.

Here's the link.

Sign Up For Harbor Freight Offers

 

[Travelover]

Also a site online that offers the coupons,just do agoogle on harbor freight coupons!

Or get 'em here.

Harbor Freight Coupon Thread - SlickDeals.net Forums

 

[tugboat-2]

WOW !! Fantastic deal there Bill (Johndeere4300)!! I got my JD-I-Match a couple years ago right after getting my new 3520,.....but holy cow I think it cost about 250 CDN plus tax. So much easier dropping a blade and picking up the mower etc. after years of the pry bar, hammer tricks hookin' up the old way!!

By the way,..I backed in, hooked up the (RFM) and gave it a lift to make sure I was properly "hooked" first prior to dropping it down and sliding the PTO on. BUT,..Oooops, wasn't watching the PTO,..it caught under the towbar and bent. I tried to straighten it but it had a slight wobble. Not good at those RPMs.

So had to buy a new one. I aways hated the "slide back and twist" lock,.. especially down in those "awkward" positions, so got the sliding pin type. Couldn't be happier!! ("almost"..fun connecting it!)(?)

CHEERS !
. . tug

 

[gumshu]

Or get 'em here.

Harbor Freight Coupon Thread - SlickDeals.net Forums

THANKS TRAVELOVER... Just requested my coupons and I'll be buying the HF QH ASAP. Our local Harbor Freight has the Cat 1 for $79. With 20% off, that will cost about $70.00 out the door.

 

[gumshu]

It's been discussed and discussed I know. Just wanted to share the pictures. 97214-3VGA (27.5 inside clearence - NOT the 93691-1VGA which is 26.5) was on sale for 69.99. 9.99 shipping and I used a online coupon for a 10.00 gift card.

Drilled out the holes on the J-hook for quick release pins so I don't have to use bolts. Three of my implements will work sweet as delivered with the hook. The used allied snowblower does not meet quick hitch ASAE specifications so I bought the optional adapter bracket for it (I think it was 8.99). Bought a few cat 2 bushings from Agri Supply because the lower implement pins will fit much better with cat 2 bushings.

Pretty easy and cheap solution. I haven't hooked it up yet, but, my tape measure tells me it will work fine.

Regards

White2o...
1 - What size bit did you use to drill out the J-hook?
2 - Where did you get the quick release pins?
3- What size quick release pins are you using?

I'm about to buy the Quick Hitch and I like the way you have yours set up. Thanks