By the Ironworker for the Ironworker

[4shorts]

By now some of you might be able to guess what I'm building

 

[rjmack]

button box?

 

[Mark @ Everlast]

Icemaker shoot?

 

[dcyrilc]

Icemaker shoot?

Hey Mark,
Are you on the East or West coast?

 

[Mark @ Everlast]

I am in GA. Company is in CA.

 

[mjncad]

By now some of you might be able to guess what I'm building

A slug catcher or a one-arm-bandit?

 

[4shorts]

As the title of the thread stated "by the Ironworker, for the Ironworker". It meant all cuts were made by the Ironworker and the item will be used for the machine.

The first two photo's show the discharge chutes for the waste that comes off the work your cutting. I try and keep my shop very clean and it was really bugging me to see small bits of steel hitting the floor and I'd have to stop and pick them up so I decided to fabricate two waste containers that will be quick release with a handles and it would contain those small bits of waist and keep them off the floor making for a cleaner, safer work environment.

I'll post the completed project tomorrow.

 

[rjmack]

so, i was right

you must be making some pretty good coin out there on the rock. just wondering, how big is your shop?

i have plans to start building a shop next spring, i wouldn't mind keeping up with what you think of the various machines you buy.

 

[Mark @ Everlast]

I got "shoot" right. The Al was throwing me. If you ever saw the guts of one of these walk up ice vending machines, you would have been fooled too.

 

[dcyrilc]

I am in GA. Company is in CA.

Is GA Eastern or Central time zone. Just curious as how late I often see you posting I figured you must be west coast.. You must get to sleep-in in the mornings. LOL I always have to be up by 5am.