I have been reading alot of good info on this site so I decided to sign up. I do have my 1st ? for you guys.I am going to buy a land scape rake & I narrowed it down to the woods lr72 or the Fred Cain. My ? is witch one do think is bilt better? I know the woods has a good rep but the Fred Cain looks a little stouter than lr72. Thanks for any info good or bad.
land scape rake ?
- Thread starter idukhunt
- Start date
- Views: 3197
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,660
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
Just want to say WELCOME
Sorry can't offer anything on the rake as I am not familiar with Fred Cain.
As always the best one is a trade off on: capability vs need vs cost .
Then mix in a hole lot of opinion. It is a low service item so the dealer or seller shouldnt matter much unless you want to develope a relationship.
gg
Sorry can't offer anything on the rake as I am not familiar with Fred Cain.
As always the best one is a trade off on: capability vs need vs cost .
Then mix in a hole lot of opinion. It is a low service item so the dealer or seller shouldnt matter much unless you want to develope a relationship.
gg
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,248
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Welcome to TBN.
I also haven't heard of Fred Cain.
Both offer almost the same,so I would go w/gut feeling.
I also haven't heard of Fred Cain.
Both offer almost the same,so I would go w/gut feeling.
sweettractors
Advertiser
clemsonfor
Super Member
Fred cain is a name brand at least here in the south i have seen it. At everything attachemets he sells some fred cain stuff, i think the field cultivators are FC.
sweettractors
Advertiser
Fred Cain equipment is good equipment. We have sold it for almost 30 years. Used to be called "Thrifty" many years ago. Ken Sweet
djradz
Veteran Member
Woods is heavier built than most. Not familiar with Fred Cain.
nickel plate
Veteran Member
The only replacement parts you might ever need will be the tines. Reasearch the replacement cost and the ease of replacement.
Do check the size, thickness and spacing of those tines on your two choices.
Do either of the rakes' tine bars reverse for finish work?
You will enjoy that attachment.
Do check the size, thickness and spacing of those tines on your two choices.
Do either of the rakes' tine bars reverse for finish work?
You will enjoy that attachment.
kebo
Elite Member
- Joined
- May 16, 2006
- Messages
- 2,930
- Location
- Lexington, SC
- Tractor
- 2001 John Deere 790 4x4, bar tires
Probably the most common failure mode on a rake (not including the rake tines) is the frame supporting the rake tines, which can twist or bend. I recall one forum member posting pic's of the 5' long angle frame on his rake that he had twisted. So be sure to compare the frames with each other, the heavier, stronger looking frame might be the better choice, if the price is not out of line. Good luck!
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,654
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
:welcome: to TBN. I am a big Woods and Land Pride implement fan, but for landscape rakes I would prefer the Fred Cain rake just for the tubing.
Be sure to let us know which one you get and how you like it. :thumbsup:
Be sure to let us know which one you get and how you like it. :thumbsup:
