Redneck Band-Aid

   / Redneck Band-Aid #1  

Obed

Elite Member
Joined
Dec 16, 2006
Messages
2,627
Location
East TN
Tractor
John Deere 4210 FEL BH
While working on our house project, my BandAid wouldn't stay on so I enhanced it. Worked great.

Obed
 

Attachments

  • Img_4593.jpg
    Img_4593.jpg
    91.3 KB · Views: 527
   / Redneck Band-Aid #2  
I resemble that title.;) I've used duct tape, electrical tape, and super glue in a pinch.

Steve
 
   / Redneck Band-Aid #3  
I use black electrical tape. :thumbsup:

or PVC glue, it only stings for a while. lol
 
   / Redneck Band-Aid #4  
Obed:

I hope you don't wear that ring while you are working. It is good way to lose a finger, which not only isn't a lot of fun, but it will set back your project by at least a month...
 
   / Redneck Band-Aid #5  
Obed:

I hope you don't wear that ring while you are working. It is good way to lose a finger, which not only isn't a lot of fun, but it will set back your project by at least a month...

Good point. Rings can really cut off your circulation. :D
 
   / Redneck Band-Aid #6  
It isn't really a red neck bandaid- it's a Red Green bandaid:laughing:
 
   / Redneck Band-Aid #7  
Nice! I have done that too. I guess we could start a club! :D
 
   / Redneck Band-Aid #8  
Actually electro tape works better for this purpose.
 
   / Redneck Band-Aid #9  
#227 another use for duct tape. ;)
 
   / Redneck Band-Aid #10  
Obed:

I hope you don't wear that ring while you are working. It is good way to lose a finger, which not only isn't a lot of fun, but it will set back your project by at least a month...


I've had two ring accidents over the years....both were pretty painful. In the first one, I hooked my ring on a bolt which extended from a big old garage door as the door was lifted by a HD motor/lift. It picked me about 5 feet off the floor before I slipped off the bolt. Pretty swollen....but no "impact".....on this event. My finger got a little larger for a few days.

On the second event I was standing high on a ladder....taking off our boat canopy....and reaching way too far out when the ladder tipped. Again I hooked my ring on the threads of a bolt as I swung by my ring finger. At the peak of the "swing" the bolt let go and I landed on my back with a thud. The flesh from my finger was over the top of the ring....and a Dr had to cut the ring off due to the swelling and dis-located flesh. NOT A GOOD SCENE ON THIS ONE.

I still wear my wedding ring tho. :D
 

Tractor & Equipment Auctions

2000 International 4700 Truck (RUNS) (TITLE) (A50774)
2000 International...
SpotWeld RockerRite 480V Arm Type Spot Welder (A50322)
SpotWeld...
RIDE AND DRIVE INFO (A50775)
RIDE AND DRIVE...
2006 Ford Fusion SE Sedan (A51694)
2006 Ford Fusion...
2008 Ford E-250 Cargo Van (A50323)
2008 Ford E-250...
ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50775)
ALL ITEMS NOT...
 
Top