Yes it is, the more I look at it there's no way it can be right. The same brochure says that a 36" pin on bucket is 216lbs. Which seems somewhat accurate, but then you figure the 72" front bucket is the same weight...
New (to me) JD 110 Coming this Way!
- Thread starter Martian
- Start date
- Views: 30137
-
- Tags
- john deere 110
Yes it is, the more I look at it there's no way it can be right. The same brochure says that a 36" pin on bucket is 216lbs. Which seems somewhat accurate, but then you figure the 72" front bucket is the same weight...
Zebrafive
Super Member
Both my loaders, JD 245SL & JD640SL have 73" std duty buckets. THey have to weigh way more than 200lbs. When they are off the loader I can barely shove them around. I'd get 450 to 550lbs.
jenkinsph
Super Star Member
The 48" rail pallet forks are about 450 lbs, the brochure is simply wrong. With the amount of printed publications today no one can be right all the time.
Not a chance that the 72hd bucket is anywhere near 200 lbs, I know I can't begin to pick up one side of it.
Not a chance that the 72hd bucket is anywhere near 200 lbs, I know I can't begin to pick up one side of it.
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
The 4n1 is a heavy beast! And new, it was close to $3K! I could buy a new HD bucket with cutting edge AND a heavy duty root grapple for the same money!
It was a straight forward decision for me!
AKfish
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
Here's the *.pdf from Deere for the WorkSite Pro attachments. May or may not include weights. (Haven't read thru it myself...)
http://www.deere.com/en_US/docs/construction/worksite_pro_attachments/DKAPROCWP.pdf
AKfish
http://www.deere.com/en_US/docs/construction/worksite_pro_attachments/DKAPROCWP.pdf
AKfish
I don't know WTH is going on but this dang thing isn't here again! I called the dealer where it's being delivered, hoping they just forgot to call me, but sure enough it wasn't there. They said the shipper called and needed a permit for something. Called the shipper and they said tomorrow for sure as well, but what could they need a permit for? Guess theres not much I can do but deprive you guys for another day without picture
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
I don't know WTH is going on but this dang thing isn't here again! I called the dealer where it's being delivered, hoping they just forgot to call me, but sure enough it wasn't there. They said the shipper called and needed a permit for something. Called the shipper and they said tomorrow for sure as well, but what could they need a permit for? Guess theres not much I can do but deprive you guys for another day without picture
97 posts for a machine thats not even here???
98 now
RDrancher
Veteran Member
I don't know WTH is going on but this dang thing isn't here again! I called the dealer where it's being delivered, hoping they just forgot to call me, but sure enough it wasn't there. They said the shipper called and needed a permit for something. Called the shipper and they said tomorrow for sure as well, but what could they need a permit for? Guess theres not much I can do but deprive you guys for another day without picture
I knew you shoulda let me go get it.
CHDinCT
Veteran Member
Hey Martian - just saw it going down the interstate here in CT so I think they overshot Michigan by a bit - just hang in there man. :laughing: