Did a little hay last week ...

[pacerron]

Pasture is to rough to get any faster and I store them outside.

Probably better to be tighter then.
I guess your feeding cows. Do they eat it all or do you figure 1/3 bale waistage?

 

[foreman Etexas]

I dont get much waste even using hay rings I make them eat it before I put out 2more. There are usually some cows that will still eat on the stuff thats left on the ground even when I put out new,so they dont have to fight the others or wait there turn. I have been wonting to get a 3point hyd.un-roller but with hay rings dont have to put out hay everyday,like I would have to un-rolling one. I go back later and burn were I feed hay for that winter and drag it with 12ft drag.

 

[blueriver]

Did you get any shots of your grapple pick up in action?

No I sure didn't ... my grandson was grappling today while I was raking the next field ... I took the rake job because he need's grapple experience ... I can get some tomorrow CAUSE his stacking in the barn fell over !!!!! So .... we get to redo it!!!!

 

[blueriver]

Blueriver:That looks like the tractor(one pulling square baler) my old hay guy pulled rake/5x6 baler combo with. 6cyl? He said that his 6cyl.pulled and got better fuel mileage compared to his 2 other newer JD's with 4cyl. on his cutting tractors. Its Nice but were is the new DEERE hiding out at? My father took my cutter off tractor when he was done with pasture in front of his house and he came to me just a cursing about it,the next day:laughing:

It is the 6 cylinder ... talk about an air ride !!! Most comfortable tractor (I Think) ... the new (to me) deere was cutting hay out side of the camera zoom!!!! Thats another nice machine ... the 5520 with the air ride seat is awesome .... turning radious stinks.

We rolled 8.85 acres this afternoon and got 20 bales 4x5.5 ... not bad.

BTW ... I recall the first few times taking the cutter off ...a few cuss words!!! The more practice the easier and faster it gets.

 

[blueriver]

Did you get any shots of your grapple pick up in action?

Speaking of grapples I learned something about them .... my 336 went down .... got the neighbors and never thought to check the bale length. They accumulated very well but the first couple grapple attacks failed ... we couldn't get the front 2 bales. Turned out his baler was putting out 42" bales and that put the total length at 102" .... so we ended up grabbing 8 out of the 10 and leaving the two front bales and then re accumulating those into stacks of 8 .... the system is designed for 36" bales ... total 90" to lay nicely on those 8' wide trailers...anyway thought that was interesting. I've always told my customers to be sure the baler is set for 36" bales .... and then I failed to check it ... anyway it worked

 

[foreman Etexas]

It is the 6 cylinder ... talk about an air ride !!! Most comfortable tractor (I Think) ... the new (to me) deere was cutting hay out side of the camera zoom!!!! Thats another nice machine ... the 5520 with the air ride seat is awesome .... turning radious stinks.

We rolled 8.85 acres this afternoon and got 20 bales 4x5.5 ... not bad.

BTW ... I recall the first few times taking the cutter off ...a few cuss words!!! The more practice the easier and faster it gets.

He actually bought a new Deere to pull his combo and used it once and then went back to using the older tractor and put the new tractor on the cutter. He said it was hands down way more comfortable and pulled twice as good. I would like to buy me a New or Newer bigger 2x4 cab tractor without a loader just for shredding and the baler but putting wife threw Nursing school and raising 2 boys,I dont think its in the budget this year,maybe when she gets a nursing job she will buy me one

Thats really good yield on 8acres:thumbsup:

My father is gonna haul some cows over to lease place in Leona and see if its worth cutting tomorrow,if so will have to start hauling everything over there next time off. I still need to bale the father-in-law up some square bales also. Then hook shredders up and go mow the other lease place in Dew and touch up one of our other pastures(I stay behind). I have put out some more of the Grasshopper fertilizer but the wife got the wrong stuff she got 42-0-0 but going to go ahead,put it out and not say anything,since she helps out alot.

 

[blueriver]

He actually bought a new Deere to pull his combo and used it once and then went back to using the older tractor and put the new tractor on the cutter. He said it was hands down way more comfortable and pulled twice as good. I would like to buy me a New or Newer bigger 2x4 cab tractor without a loader just for shredding and the baler but putting wife threw Nursing school and raising 2 boys,I dont think its in the budget this year,maybe when she gets a nursing job she will buy me one

Thats really good yield on 8acres:thumbsup:

My father is gonna haul some cows over to lease place in Leona and see if its worth cutting tomorrow,if so will have to start hauling everything over there next time off. I still need to bale the father-in-law up some square bales also. Then hook shredders up and go mow the other lease place in Dew and touch up one of our other pastures(I stay behind). I have put out some more of the Grasshopper fertilizer but the wife got the wrong stuff she got 42-0-0 but going to go ahead,put it out and not say anything,since she helps out alot.

Stay behind? I don't know the meaning of being caught up ... I recall being excited when the kids were all growed up and on there own ... now I beg for them to come home and spend some time !! Then in my case my step daughter gives up on this one and we are raising him, going on 4 years now ... he has turned into a real hand.

So you are likeing the grasshopper? I still have some in the shed from last year ... I guess I could go ahead and put it out.

 

[foreman Etexas]

Stay behind? I don't know the meaning of being caught up ... I recall being excited when the kids were all growed up and on there own ... now I beg for them to come home and spend some time !! Then in my case my step daughter gives up on this one and we are raising him, going on 4 years now ... he has turned into a real hand.

So you are likeing the grasshopper? I still have some in the shed from last year ... I guess I could go ahead and put it out.

I am giving the Grasshopper a chance,the 30-8-10 done really well for the price even if I dont bale the grass is up good to turn cows out in.
Now I dont know what this 42-0-0 is going to do but im going to put it out were I can water if needed.

 

[bigbull338]

weve got hay down in 2 places right now.an nite before last got an inch of unexpected rain.baler man cut about 4acs yesterday evening.said some of the hay was getting dry enough to bale today.so i figure he will start after lunch.then he said when he gets done here he going todo a place close by.an then take a day or 2 off bring his tractor an gooseneck trailer.an we are going to haul an stack hay.gonna be rough hauling close to 300 round bales.

 

[blueriver]

weve got hay down in 2 places right now.an nite before last got an inch of unexpected rain.baler man cut about 4acs yesterday evening.said some of the hay was getting dry enough to bale today.so i figure he will start after lunch.then he said when he gets done here he going todo a place close by.an then take a day or 2 off bring his tractor an gooseneck trailer.an we are going to haul an stack hay.gonna be rough hauling close to 300 round bales.

Unexpected rain ... always fun!! Post some pic's of the hay hauling ... Please!!