No, you can't run a light bulb from a wood stove, and it isn't a good comparison of ways to implement solar. The point I was making was that there are other areas where we have to invest money up front to get savings, and the savings comes MUCH faster.
I burn about 6 cord of wood per year. I buy it in log length for roughly $100 / cord. I have a $800 wood splitter, a $300 chain saw, and will spend about $50/year in fuel for the saw, splitter, and tractor (to move the wood on pallets) for cutting, splitting, and stacking. In total, my investment for the year in wood is somewhere in the $700 range.
By way of comparison, a cord of wood replaces an average of 175 gallons of oil (lots of factors have to be considered to get a fully accurate number: burner efficiency, type of wood, water content, etc - but 175 is a good "working number"). That totals out to 1050 gallons of oil. At $3.50/gallon (cheap during heating season in the northeast), that's $3,675 in oil. Subtract out the $700 I spend for the wood, and you're just shy of $3,000 every heating season.
Put better, I save somewhere around 80% by heating primarily with wood. That's a more useful number because the cost of wood increases in relation to the cost of oil. If oil were to double, you could expect the cost of wood to double. I would still save 80% although the dollar amount would increase to almost $6,000. :shocked:
That is comparing apples to apple pie. A cord of wood goes from $150 to $300.
In order to FAIRLY compare wood heat versus most other methods one should include human interaction such as labor required to get the fuel to change into heat and the "going" cost of the fuel, not what one individual pays for it.
I've got 3 houses and 4 methods of heating.
1. When I want to heat with the natural gas heater I just ensure the pipeline is still working and turn the thermostat.
2. When I want to heat with the electric heater I ensure the electricity is still working and turn the thermostat.
3. When I want to heat with the LPG gas heater I call the delivery man and turn the thermostat.
4. When I want to heat with the woodstove or fireplace I have to ensure the wood is nearby, carry it in and feed the unit.
SWMBO wanted a pellet heater at one time. Until I reminded her that if she was alone she'd be the one carrying the pellets.
My costs for fuels 1 thru 3 is the market rate, fuel 4, wood, is "FREE" to me. I make it as a byproduct of my small sawmill and cleaning up the lots. But even "FREE" requires a bunch of effort.
Since you ((meburdick) cut, split, transport and stack a cord of wood for about $10 a cord (6 cords with an out of pocket price of $100, plus $50 in fuel) and then gets it inside, you must have a greatly more efficient way of doing it than I have found.
I've enough trees on my land I could keep you (meburdick) busy forever at $10/cord.
A better comparison would be to price your 6 cords of wood at market rate.
Connecticut Firewood Service sells it for $230/cord in Connecticut. Thus your 6 cords OUTSIDE would be worth $1380, and that's still not in the burner. So add in your labor to get it to the insert.
I agree there is a large savings, but to compare logs to oil is just not fair.
And if you looked into wood gasification you would see how easy it would be to run a light bulb from wood.
WoodGasifier News - Wood Gasifier Generator