Debating POSITION CONTROL. What is it to YOU?

   / Debating POSITION CONTROL. What is it to YOU? #31  
I thought I explained how to check if the tractor has PC.

These other people that maybe have PC, you would think they would know something about their tractors.

Maybe it is an option on some tractors.
 
   / Debating POSITION CONTROL. What is it to YOU?
  • Thread Starter
#32  
I thought I explained how to check if the tractor has PC.

???? Yea,,, you did.... and did I not just say that the GC1710 would pass your test? I don't understand where you are going here.
 
   / Debating POSITION CONTROL. What is it to YOU? #33  
Whoa there, I did NOT post anything about a Massey GC1710 nor do I care too.
 
   / Debating POSITION CONTROL. What is it to YOU?
  • Thread Starter
#34  
Whoa there, I did NOT post anything about a Massey GC1710 nor do I care too.

Sorry for the confusion, I thought you had said at some point that the GC series did not have PC. I apologize as this was not the case.
 
   / Debating POSITION CONTROL. What is it to YOU? #35  
I would say just go hook a 2 bottom plow to you tractor. Plow 5 or 10a and when you get done you well know just what you have.
 
   / Debating POSITION CONTROL. What is it to YOU?
  • Thread Starter
#36  
I would say just go hook a 2 bottom plow to you tractor. Plow 5 or 10a and when you get done you well know just what you have.

How so? Because it sounds like you are talking about Draft Control, which is something totally different. Can you please explain this comment?
 
   / Debating POSITION CONTROL. What is it to YOU? #37  
I didn't say anything about draft control. What I mean is when you are done you well know how PC works and you well know all about PC or the 1/4" system.
 
   / Debating POSITION CONTROL. What is it to YOU? #38  
Id like to ask you then what you make of the Johnson City Kubota LLC explanation I posted a couple posts above. If I am understanding you, then you essentially agree with that explanation.

That description is inline with my experience.
 
   / Debating POSITION CONTROL. What is it to YOU?
  • Thread Starter
#39  
I didn't say anything about draft control. What I mean is when you are done you well know how PC works and you well know all about PC or the 1/4" system.

That's just fantastic.

You probably don't have any insight on "What" PC is, as opposed to how it works when you plow up 10 a of land do you? Cause if you could share your opinions on what exactly you think PC is, that would be useful here.
 

Tractor & Equipment Auctions

1994 Toyota 6000lbs 2 Stage Forklift (A52128)
1994 Toyota...
New Kivel Walk Behind Pallet Forks (A50774)
New Kivel Walk...
UNUSED CFG Industrial XZ20R Mini Excavator (A47384)
UNUSED CFG...
2014 MACK CHU TANDEM AXLE DAY CAB (A51219)
2014 MACK CHU...
2013 INTERNATIONAL WORKSTAR 7600 SBA 6X4 DUMP TRK (A51406)
2013 INTERNATIONAL...
CATERPILLAR D6T LGP CRAWLER DOZER (A51242)
CATERPILLAR D6T...
 
Top