New Member Introduction

[jonathansfather]

Good morning. My name is Mark (Jonathan's father), and my wife, son, mother, and I moved, about a year back, to a small ridge-top farm in west-central West Virginia. Last October, I acquired one-owner, 1968 IH Farmall 140, with eight (8) implements. I've since used all but the bucket, changed plugs, points, condenser, coil, fan belt, and the old Zenith carb butterfly linkage operated by the governor. I'm not getting the same power since the carb linkage change, and the governor wants to idle forward and backward a bit, and the tractor will nearly quit, at times, whether with a load or not. Might I need a new governor unit, or an adjustment to the linkage bar, etc? Any help would be appreciated.

 

[The kid]

Welcome Mark to TractorByNet. We have a good bunch of guys in the IH forum to pose your question for a timely responce. Greetings from Tennessee. -kid

 

[mguitas]

:welcome:

 

[murphy1244]

Welcome

 

[jonathansfather]

Thanks, kid, for the welcome, and the info about the boys in the IH forum. How do I access "the IH forum"?

 

[creekbend]

Thanks, kid, for the welcome, and the info about the boys in the IH forum. How do I access "the IH forum"?

Go to the FORUMS at the top of this page, then go to Brand Specific Forums and look for Case-IH. Best wishes and Welcome aboard.

 

[jonathansfather]

Thanks for the welcome, creekbend! Will do on the BSF/CaseIH. My family and I lived for a year in Eastern NC, Beufort County, near Washington. Where's Yanceyville NC?

 

[farmgirl19]

:welcome: from Texas!

 

[flamom]

Welcome from sunny Florida!
I am new as well and have found the folks here willing to share a wealth of info!
:welcome:

 

[jonathansfather]

Thanks for the welcome, farmgirl19! I watch Texas Country Reporter every week on RFD-TV. Bought a used '02 Road King several years back from a boy in Tyler, Texas. Flew in to Dallas-Fort Worth airport and rode the bike back to West Virginia!

 

[jonathansfather]

Thanks for the welcome, flamom.