Zip ties on new Kubotas?! )0:
- Thread starter PapaPerk
- Start date
- Views: 29479
k0ua
Epic Contributor
Well here is the Kioti
They are Black.
They are Black.
DieselnHooters
Platinum Member
Anything threatening the reigning emperor will make a splash
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Who's that?
DieselnHooters
Platinum Member
Zip ties on new Kioti ...try it
OP
PapaPerk
Veteran Member
- Joined
- Jun 12, 2004
- Messages
- 2,293
- Location
- USA
- Tractor
- Kubota L3830, Ford Golden Jubilee, 1939 Sears Economy, Polaris Ranger 400, Honda Foreman 450 ES, 2004 Dodge Diesel 3500
Well here is the Kioti
They are Black.
<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=339811"/><img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=339812"/><img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=339813"/>
Looks pretty good
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
The ties on the Kioti are tight and clipped. Much better than the Kubota.
k0ua
Epic Contributor
What's funny to me, is if you don't like the way the ties on the Kubota look and the fact they are white, it would only take about a dollar and about 5 minutes to get some black ones and install them nicely and clip them. I have a complete drawer filled with tye-wraps, mostly black ones, of different sizes and include the ones that have a hole to be able to use a screw to mount them on something. Most are Hellerman Tyton, but I do have some "cheap Chinese junk" ones too. There is a big difference in them.
James K0UA
James K0UA
Different expectations and obsessions.
Ex. - Olde Tyme farmers weren't too worried about paint - many of their tractors lived outside, and were beat on as a working tool.
Now some tractors get waxed frequently and the owners spend time/$ working on them the way some guys used to work on hot-rods. High end sound systems in tractors are not uncommon. This ain't GrandPa's tractor anymore !
As a maintenance supervisor at American Airlines once said "People see coffee stains on a passenger tray-table and assume we don't maintain our engines". The old perception-is-reality issue. There are valid points on both sides of that story.
For what people spend today to buy a New tractor, many of them expect perfection. I say they have a point. If you can (or have to) tolerate less-than perfect - buy Used, you'll save some money - that's what I did.
The Devil is In the Details..... for some people.... others don't care to pay any attention. I prefer quality UV stable ties, that's what I keep in stock and use often.
Myself - I have a real issue with how ties are trimmed. That comes from having torn up the back of my hands on cut ties while working in cramped areas more than once.
If I recall the OP's pic, I'd rather have ties trimmed long, than short-but-still-protruding. If you have that cut end protruding 1/8", it won't flex much at all, and will scrape/cut the **** out your skin with enough pressure. Left an inch long, a cut end readily flexes, and doesn't cause you as much skin damage.
I use a really good quality flush cutting plier to trim my ties perfectly flush with the head - no cut hands later. :thumbsup:
Something like these:
5'' Lightweight Flush Cutter - D275-5 | Klein Tools
People reading this who don't spin wrenches may think I need my Meds changed. That might be true, but not based on the engineering points raised .
Rgds, D.
Ex. - Olde Tyme farmers weren't too worried about paint - many of their tractors lived outside, and were beat on as a working tool.
Now some tractors get waxed frequently and the owners spend time/$ working on them the way some guys used to work on hot-rods. High end sound systems in tractors are not uncommon. This ain't GrandPa's tractor anymore !
As a maintenance supervisor at American Airlines once said "People see coffee stains on a passenger tray-table and assume we don't maintain our engines". The old perception-is-reality issue. There are valid points on both sides of that story.
For what people spend today to buy a New tractor, many of them expect perfection. I say they have a point. If you can (or have to) tolerate less-than perfect - buy Used, you'll save some money - that's what I did.
The Devil is In the Details..... for some people.... others don't care to pay any attention. I prefer quality UV stable ties, that's what I keep in stock and use often.
Myself - I have a real issue with how ties are trimmed. That comes from having torn up the back of my hands on cut ties while working in cramped areas more than once.
If I recall the OP's pic, I'd rather have ties trimmed long, than short-but-still-protruding. If you have that cut end protruding 1/8", it won't flex much at all, and will scrape/cut the **** out your skin with enough pressure. Left an inch long, a cut end readily flexes, and doesn't cause you as much skin damage.
I use a really good quality flush cutting plier to trim my ties perfectly flush with the head - no cut hands later. :thumbsup:
Something like these:
5'' Lightweight Flush Cutter - D275-5 | Klein Tools
People reading this who don't spin wrenches may think I need my Meds changed. That might be true, but not based on the engineering points raised
.Rgds, D.
