DABSGT
Veteran Member
LD 1
Nice job never know they were split.
Sent from my iPad using TractorByNet
Nice job never know they were split.
Sent from my iPad using TractorByNet
IH 300 Utility....My new project
- Thread starter LD1
- Start date
- Views: 43210
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yep.. they all got their issues. even the U channel ones. they can get tight when rusted.
OP
LD1
Epic Contributor
Thanks. The pics really dont to them justice. The shadowing/glare makes it look like there are lines where the weld stopped. Not really a good pic. I'll have to get some more, now that I have got a coat of primer on them...
Any of them have to be better than spending a day to get apart. Tube in tube with tight fit just sucks.
I like the style that is two heavy pieces of steel bolted together. The 2040 dad had as well as the 8n are like that. :thumbsup:
OP
LD1
Epic Contributor
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
leaf axles.
but they got their issues too.
but yeah. hard to beat a rusted tube interference fit!
but they got their issues too.
but yeah. hard to beat a rusted tube interference fit!
Turbys_1700
Elite Member
Good gosh almighty LD...
You should have a show on the History Channel...
Restoration American Tractor...
You sir are a skilled craftsman...
Honest to the good Lord above...
After seeing your work and the other work of the folk on here I will never show anything that I do here...
Your attention to detail and craftsmanship is great...
That is going to be one good looking unit when you get it done...
You should have a show on the History Channel...
Restoration American Tractor...
You sir are a skilled craftsman...
Honest to the good Lord above...
After seeing your work and the other work of the folk on here I will never show anything that I do here...
Your attention to detail and craftsmanship is great...
That is going to be one good looking unit when you get it done...
alton30115
New member
- Joined
- Sep 22, 2011
- Messages
- 1
- Tractor
- int. 300, cubs
hi ld1.
did you happen to take of the clutch, pressure plate and stuff before you put her back together?
would like to see it before i break mine.
thanks
alton
did you happen to take of the clutch, pressure plate and stuff before you put her back together?
would like to see it before i break mine.
thanks
alton
OP
LD1
Epic Contributor
No more pics. All the pics I got are posted here already.
It really wasnt too terrible of a job.
It really wasnt too terrible of a job.
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
How did the Tractor turn out????
OP
LD1
Epic Contributor
Still needs a few little things that I just haven't got around to. I bought it when I was laid off with plans to restore and attempt to sell and if not use it for a bushhog tractor.
Well I went back to work, daughter was born, winter hit and lots of plowing, as well as reworking a plow. So it went to the back burner.
I still need to do something with the seat, needs a battery, and I need to do something with the hitch. It has the IH fast hitch, which I did not put back on. and will make a 3PH for it. Just got too many things to do and not enough time.
Well I went back to work, daughter was born, winter hit and lots of plowing, as well as reworking a plow. So it went to the back burner.
I still need to do something with the seat, needs a battery, and I need to do something with the hitch. It has the IH fast hitch, which I did not put back on. and will make a 3PH for it. Just got too many things to do and not enough time.
