nybirdman
Super Member
A front plow will serve you a lot better than a pusher on long straight runs.
Snow Pusher on compact Tractor
- Thread starter devildog1
- Start date
- Views: 42923
Spiderman
New member
I have used a 7' pusher on my 4630 for some time. Loaded tires no chains. It works good in parking lots but I do not like the rubber edge. It has a difficult time getting down to the asphalt.
Green Image
New member
We had our first chance over the weekend to try this set up out. 8' Boss pusher with steel trip edge on 50hp New Holland. Moves snow just as well as our Boss V plows on a truck with much better visibility. No chains, but some additional rear weight would be nice.
skyhook
Veteran Member
- Joined
- Mar 12, 2013
- Messages
- 1,906
- Location
- Canada Ontario
- Tractor
- 1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4
Nice:thumbsup:,, I just don't understand the difference between a pusher VS a bucket.
To me, they do about the same job
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Nice:thumbsup:,, I just don't understand the difference between a pusher VS a bucket.
To me, they do about the same job
Not many 50 HP CUT's have 8' buckets.
BAP
Gold Member
- Joined
- Aug 23, 2013
- Messages
- 360
- Location
- Walpole, NH
- Tractor
- Kubota B2920 Loader, BH65, 60"MMM, B2782B snowblower, Forks , Woods 48" bush hog
A snow pusher holds more snow than most buckets. Work much better for clearing large areas.Nice:thumbsup:,, I just don't understand the difference between a pusher VS a bucket.
To me, they do about the same job
CJONE
Veteran Member
I have the same set up. But with 2 link v-bar chains on the back and if it gets real bad I put them on the front also. Loaded tires and a 1400lb blower on the back. It pushes real well! CJ
KenB2920
Veteran Member
Nice:thumbsup:,, I just don't understand the difference between a pusher VS a bucket. To me, they do about the same job
I found a deal on a 7' pusher. Not sure how the tractor will handle it. If it doesn't do well, I'll still keep it for when I upsize the tractor.
Say you have a 1/2 yard 3/4 yard or even large 1 yard bucket..... My little 7' pusher holds 6 yards of snow. So even it I only fill her half way, I'm still saving a boat load of time.
KenB2920
Veteran Member
I also use this setup for the roadway.
Worked well last year until I broke the " A" frame. It back and ready to work again after being shortened up. I threw a coat of paint on her to pretty her up. She could use some more sanding and paint but as long as it's functional.
7' 6" western. I have removed the hydraulic Rams so I manually turn it for now. Eventually I'll have remotes or a third function and I'll add Rams. Maybe on this tractor or the next. Either way, this setup seems to work.
Worked well last year until I broke the " A" frame. It back and ready to work again after being shortened up. I threw a coat of paint on her to pretty her up. She could use some more sanding and paint but as long as it's functional.
7' 6" western. I have removed the hydraulic Rams so I manually turn it for now. Eventually I'll have remotes or a third function and I'll add Rams. Maybe on this tractor or the next. Either way, this setup seems to work.
