79 Ford TRUCK won't start

   / 79 Ford TRUCK won't start #1  

farm boy00

Veteran Member
Joined
Jul 17, 2014
Messages
1,297
Location
Howard City, MI
Tractor
John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
79 Ford F 150 won't start first of all I know this ain't a tractor but technically it's going to be getting used on farm in a farm truck but as replace a coil I have not been able to get the truck running yet I have replace the coil with a brand new one that got use a little bit this winter the truck with only one for climate now I've got no power going from the coil to the spark plugs everything is brand new on this truck but the motor and carburetor needs help fast please
 
   / 79 Ford TRUCK won't start
  • Thread Starter
#2  
ForumRunner_20150508_192414.png



ForumRunner_20150508_192428.png



ForumRunner_20150508_192441.png



ForumRunner_20150508_192707.png
 
   / 79 Ford TRUCK won't start #3  
G'day first off do you have power to the + side of the coil?

Jon
 
   / 79 Ford TRUCK won't start
  • Thread Starter
#4  
G'day first off do you have power to the + side of the coil?

Jon

Yes Jon, I Do. I even put a different coil on and no change at spark plugs
 
   / 79 Ford TRUCK won't start #5  
If you have power in and out of the coil, does it go to an ignition module?? And from the ignition module, to the distributor. Should go through the pickup coil, then through the reluctor, up to the rotor button.

How old is the distributor cap..?? Have you checked the lugs under the cap for ionization buildup..?? If the cap is old, I'd probably check that first. If it's new, probably the ignition module, assuming it is wired correctly..
 
   / 79 Ford TRUCK won't start
  • Thread Starter
#6  
If you have power in and out of the coil, does it go to an ignition module?? And from the ignition module, to the distributor. Should go through the pickup coil, then through the reluctor, up to the rotor button.

How old is the distributor cap..?? Have you checked the lugs under the cap for ionization buildup..?? If the cap is old, I'd probably check that first. If it's new, probably the ignition module, assuming it is wired correctly..

The only thing that hasn't been replaced is the distributor. I think i will look on eBay for one
 
   / 79 Ford TRUCK won't start #7  
Had an old Ford like this a long time ago,
theres a ring gear, its on the distributor shaft when you pull it out, mine was worn and wouldn't let the points set right, an old mechanic found the problem for me, something to think about.
 
   / 79 Ford TRUCK won't start #8  
Not sure what you have for parts stores around there, but here at Oreillys you can get a reman'd distributor for around $50 + core. $80 with new cap & rotor.
 
   / 79 Ford TRUCK won't start
  • Thread Starter
#9  
Dj-i can find the whole system on eBay for around $30-40

Skyhook-how do you tear it all apart
 
   / 79 Ford TRUCK won't start #10  
Common failure is the pickup coil inside the distributor. About $25 to replace.
 

Tractor & Equipment Auctions

2024 WABASH STEP DECK TRAILER (A51222)
2024 WABASH STEP...
Krause 8200 Cushion Flex Disc (A52349)
Krause 8200...
2001 DITCH WITCH JT1720 DIRECTIONAL DRILL (A51242)
2001 DITCH WITCH...
LINK BELT LB-98 LOG LINE YARDER WITH MOTORIZED CARRIAGE (A51222)
LINK BELT LB-98...
Toro Workman Low Profile Spray system 200 (A50322)
Toro Workman Low...
2005 GEHL CTL70 TURBO SKID STEER (A51242)
2005 GEHL CTL70...
 
Top