Raising a barn

   / Raising a barn
  • Thread Starter
#31  
WOW...That looks awesome!!!
Nice work.

Thanks BigBoy, there are a few mistakes along the way but nothing I can't deal with. I'm certainly not a pro a barn building.:)
 
   / Raising a barn
  • Thread Starter
#32  
How did you do your flashing on the wall where the second roof starts? I've had some issues with this and found that putting a gutter on the top section solves all the issues of water splashing back up when it hits the second roof.

Eddie,
You can't see it from the pictures but the clear panels are sloped. I may have to foam the bottom a little, I'm waiting for a good rain to see if it's needed.
 
   / Raising a barn
  • Thread Starter
#33  
How did you do your flashing on the wall where the second roof starts? I've had some issues with this and found that putting a gutter on the top section solves all the issues of water splashing back up when it hits the second roof.

Eddie,
You can't see it from the pictures but the clear panels are sloped. I may have to foam the bottom a little, I'm waiting for a good rain to see if it's needed. As long as we don't get a huge east wind it will not be a problem. An east wind would be rare around here.
 
   / Raising a barn #34  
I didn't notice that, but see it now. I have no idea how that will work and I'm curios to hear your observations. My experience is that the water coming off the roof splashes on the next roof and it sprays water back towards the building, and up under the flashing. I sealed up every valley on my metal and then added some on top of each ridge so that when I screwed the flashing down on to the metal, the black tar oozed out.
 
   / Raising a barn
  • Thread Starter
#35  
I didn't notice that, but see it now. I have no idea how that will work and I'm curios to hear your observations. My experience is that the water coming off the roof splashes on the next roof and it sprays water back towards the building, and up under the flashing. I sealed up every valley on my metal and then added some on top of each ridge so that when I screwed the flashing down on to the metal, the black tar oozed out.

I was hoping that a 4/12 pitch and 3-4 inches of overhang from the upper roof would make the water hit a little lower on the roof. I think maybe I should have one of my boys get on the roof with a garden hose and see what happens. I'd rather fix it now than the middle of January.:)
 
   / Raising a barn
  • Thread Starter
#36  
Just an update;
I have finished most all of the metal work. Some trim left to do. I do not have pictures I can post right now but will take some tonight.
When I started this project I assumed I would be able to finish it in 2-3 weeks. Well, I can tell you I ain't 30 something anymore.:) My knees and back have had a workout that will take some time to recover from.
I'm very happy with how square it finished out. The metal on the corners was great. I am actually surprised it came out so good. I do not claim to be a builder of any sort.
I did say earlier that I did not plan to add any more concrete, however, I did pour some where I plan to store firewood.
One other thing; if you want to loose weight----build a barn! I dropped 15 pounds over the last 6 weeks. If I can keep it off I should be a hill climbing fool on my sled this winter.:D
 
Last edited:
   / Raising a barn
  • Thread Starter
#37  
How did you do your flashing on the wall where the second roof starts? I've had some issues with this and found that putting a gutter on the top section solves all the issues of water splashing back up when it hits the second roof.

Eddie,
I had a couple rain showers a few days ago and had no problems with water getting in from the second roof. I will still take some measures to insure I don't have a problem with heavier rain showers.
 
   / Raising a barn
  • Thread Starter
#38  
I took some pictures last night. As I said there are a few more trim pieces and the doors but it's pretty much done with the big stuff.
DSCN2295.jpgDSCN2296.jpgDSCN2297.jpg
Here are the west and north walls.
DSCN2298.jpgDSCN2299.jpgDSCN2301.jpgDSCN2310.jpg
Here are the south and west walls.
DSCN2316.jpgDSCN2311.jpgDSCN2318.jpg
All the metal up and getting ready to paint the entry door trim.
DSCN2313.jpgDSCN2314.jpg
This is the east side, the concrete pad is where I'll store the firewood.
DSCN2315.JPGDSCN2312.jpgDSCN2319.jpg
Some random shots inside. The high tech barrels with old plywood was the metal cutting station.:D
DSCN2311.jpg
So I still need to remove the fence. It will butt up against the east and west corners of the barn. Moving all that firewood inside is something I'm not looking forward too, but it will happen next week.
 
   / Raising a barn #39  
That sure is a nice big open space you have created there for storing stuff!!!!!
 
   / Raising a barn
  • Thread Starter
#40  
That sure is a nice big open space you have created there for storing stuff!!!!!

I agree, but as I start moving stuff in, it is getting smaller.

I am really happy with how it's all turned out though.:)
 

Tractor & Equipment Auctions

2008 Chevrolet Impala Sedan (A51694)
2008 Chevrolet...
2009 Volkswagen Jetta Sedan (A51694)
2009 Volkswagen...
LOAD OUT INFORMATION (A53084)
LOAD OUT...
KUBOTA M7-132 (A53084)
KUBOTA M7-132 (A53084)
2014 CAT  299D TRACKED SKID STEER (A53843)
2014 CAT 299D...
Adams 5T HC Spreader (A53473)
Adams 5T HC...
 
Top