jimmysisson
Veteran Member
- Joined
- Jul 11, 2005
- Messages
- 2,358
- Location
- W.Mass
- Tractor
- 1993 NH 2120 (the best), 1974 MF 135 (sold, but solid), 1947 Farmall A (bought, sold, bought back, sold again), 1956 MH50 lbt (sold, in 1980, darn it)
What dia is the rod they slide on? Mine is I think 1-1/2" and is about 2 ft. long: each side separate. I've managed to bend one, w 4' long forks, doing what I don't remember.
I hope the chain equalizer doesn't want to bind up the sideways action, being a ways from the cylinder c/l. Probably worse as they get gunked up. (Probably not too gunky, though, judging by the welding!) Mine slide by hand too easily if greased, too hard if not. They live inside.
You do very nice work.
Jim
I hope the chain equalizer doesn't want to bind up the sideways action, being a ways from the cylinder c/l. Probably worse as they get gunked up. (Probably not too gunky, though, judging by the welding!) Mine slide by hand too easily if greased, too hard if not. They live inside.
You do very nice work.
Jim