AKweldshop
Silver Member
- Joined
- Apr 5, 2014
- Messages
- 111
- Location
- Palmer, Alaska. The Last Frontier.
- Tractor
- Just about everything farm related.
Thought I'd share one of the brush guards I've built, this one is going on a 1991 GMC 3500.
Materials Range from 8" and 3" channel, to 1 1/4" pipe and 1/4" and 3/8" flatbar.
Mig and stick used.
Lotta pics, please don't get bored, there's the finished product at the end....
There you have it folks.....
All finished.
PS,
Don't stare at it to long, or you'll notice a few imperfections....
My advice to all fabricators, "Take your time, and get it square and even".....
Materials Range from 8" and 3" channel, to 1 1/4" pipe and 1/4" and 3/8" flatbar.
Mig and stick used.
Lotta pics, please don't get bored, there's the finished product at the end....
There you have it folks.....
All finished.
PS,
Don't stare at it to long, or you'll notice a few imperfections....
My advice to all fabricators, "Take your time, and get it square and even".....