Welding Glove suggestions

   / Welding Glove suggestions #11  
Flame Resistant Welding Jackets at Weldfabulous.com

Lots of options. I have the tillman green shirt in the first row, and while it'll get pocked up from spatter, they last a long, long time.

I have one of these: Steiner 1230-L 30" 9oz. Green/gray Weldlite Plus Hybrid FR Cotton With Leather Sleeves Jacket, Large - Weldfabulous And it's the hottest of the three.

Then this is the sleeves I have. I never got the front part though and only spent about $40 on it at the time.

Cape Sleeves - q-2 xl cape sleeve: Power Welders: Amazon.com: Industrial & Scientific
 
   / Welding Glove suggestions #12  
Could I just go to a second hand store and buy a 100% cotton long sleeve shirt?
 
   / Welding Glove suggestions #13  
Does anyone have any suggestions for protection for my arms? I have been wearing just a short sleeve shirt ( don't give me to hard a time, I'm just a newbie welder ) and my arms get "sun" burned every time I weld for more than a brief period. It seems my mig is more eager to "sun" burn me vs the stick.

View attachment 457109

I have a leather welding coat. Long sleeves and buttons in the front. Not super expensive. Does the job. Goes over a coat in the winter and can wear in the summer.
Don't weld with bare skin exposed. The UV rays are more intense than the sun. That's what I've been told by some experienced welders. Plus it keeps the hot spatter from landing on me.

Alex
 
   / Welding Glove suggestions #14  
I have a leather welding coat. Long sleeves and buttons in the front. Not super expensive. Does the job. Goes over a coat in the winter and can wear in the summer. Don't weld with bare skin exposed. The UV rays are more intense than the sun. That's what I've been told by some experienced welders. Plus it keeps the hot spatter from landing on me. Alex
I'd believe it. I never get natural sunburn. Just a few minutes welding and I look like a lobster.,
 
   / Welding Glove suggestions #15  
The welding shirts are thicker than an cotton you'll buy off the shelf. It's also treated with fire retardant. It's $16 too... You're worried about 16 bucks? :p
 
   / Welding Glove suggestions #16  
What makes you think I'm going to catch on fire? Maybe the fact that my forklift leaks oil and half the shop is covered in transmission fluid?
 
   / Welding Glove suggestions #18  
   / Welding Glove suggestions #20  

Tractor & Equipment Auctions

2012 CATERPILLAR 259B3 SKID STEER (A51242)
2012 CATERPILLAR...
2010 Honda Civic Sedan (A50860)
2010 Honda Civic...
2023 Case IH 4412F 12 Row 30 In. Row Spacing Folding Corn Head (A50657)
2023 Case IH 4412F...
UNUSED Safety Traffic Cones (A50860)
UNUSED Safety...
2017 NISSAN NV200 VAN (A51406)
2017 NISSAN NV200...
1996 Spartan Metro Star Fire Truck (A50860)
1996 Spartan Metro...
 
Top