Welding Glove suggestions

   / Welding Glove suggestions #11  
Flame Resistant Welding Jackets at Weldfabulous.com

Lots of options. I have the tillman green shirt in the first row, and while it'll get pocked up from spatter, they last a long, long time.

I have one of these: Steiner 1230-L 30" 9oz. Green/gray Weldlite Plus Hybrid FR Cotton With Leather Sleeves Jacket, Large - Weldfabulous And it's the hottest of the three.

Then this is the sleeves I have. I never got the front part though and only spent about $40 on it at the time.

Cape Sleeves - q-2 xl cape sleeve: Power Welders: Amazon.com: Industrial & Scientific
 
   / Welding Glove suggestions #12  
Could I just go to a second hand store and buy a 100% cotton long sleeve shirt?
 
   / Welding Glove suggestions #13  
Does anyone have any suggestions for protection for my arms? I have been wearing just a short sleeve shirt ( don't give me to hard a time, I'm just a newbie welder ) and my arms get "sun" burned every time I weld for more than a brief period. It seems my mig is more eager to "sun" burn me vs the stick.

View attachment 457109

I have a leather welding coat. Long sleeves and buttons in the front. Not super expensive. Does the job. Goes over a coat in the winter and can wear in the summer.
Don't weld with bare skin exposed. The UV rays are more intense than the sun. That's what I've been told by some experienced welders. Plus it keeps the hot spatter from landing on me.

Alex
 
   / Welding Glove suggestions #14  
I have a leather welding coat. Long sleeves and buttons in the front. Not super expensive. Does the job. Goes over a coat in the winter and can wear in the summer. Don't weld with bare skin exposed. The UV rays are more intense than the sun. That's what I've been told by some experienced welders. Plus it keeps the hot spatter from landing on me. Alex
I'd believe it. I never get natural sunburn. Just a few minutes welding and I look like a lobster.,
 
   / Welding Glove suggestions #15  
The welding shirts are thicker than an cotton you'll buy off the shelf. It's also treated with fire retardant. It's $16 too... You're worried about 16 bucks? :p
 
   / Welding Glove suggestions #16  
What makes you think I'm going to catch on fire? Maybe the fact that my forklift leaks oil and half the shop is covered in transmission fluid?
 
   / Welding Glove suggestions #18  
   / Welding Glove suggestions #20  

Tractor & Equipment Auctions

1988 Kenworth W900B Dump Truck with 3406B CAT (A57024)
1988 Kenworth...
2015 CHEVROLET CITY EXPRESS VAN (INOPERABLE) (A55745)
2015 CHEVROLET...
CUMMINS ONAN SD 2000 GENERATOR (A55745)
CUMMINS ONAN SD...
John Deere 5090E Tractor with Loader Prep Package, 2 Rear Remotes, Warranty Until 2028 (A55302)
John Deere 5090E...
Manac Walking Floor Trailer (A50322)
Manac Walking...
2006 International 9400i (A55302)
2006 International...
 
Top