Ford F150-I'm Done.

   / Ford F150-I'm Done. #181  
In the PNW for work trucks in the woods you see Ford crew cabs long box and the same with Dodge, mostly all diesels. Guys mostly run em for less than five years and then they are so dinged up and abused they swap em off. The Duramax GMC Chevrolets are making a dent. The guys in town with their shiny ones keep em shined and under cover, most look like they just come off the floor. I see more and more over the last decade that really are suburban toys. Man it is a lot of dough to plunk down for land yachts.

I turned into a Toyota Fan in 81 and haven't wained from that company since. Two pickups Two t100's and now this Tundra. My only complaint with it is that Toyota began following the lead of the USA mfg in tall rigs. They are a real drag to work out of the back as opposed to the lower models that allow you to reach over the rear quarter and set or grab stuff. Standard cab long box work trucks are difficult to find because the money is in the gizmos and gadgets. What impresses me with this is the suspension. Rear shocks are opposed, one side in the front, other side in the back. The 5.8 and six speed are flawless. The cab is huge. I just wish it was lower profile like the t100.
 

Attachments

  • P8240002.JPG
    P8240002.JPG
    273.5 KB · Views: 133
Last edited:
   / Ford F150-I'm Done. #182  
2014 - since I got it, I changed out the complete front grill and bumper to chrome, covered the mirrors and door/tailgate handles with chrome and added chrome tubular 'running' boards. I had a minor problem with the grill breaking when it ran into a car in a snow storm. Replacing the front with all chrome was $1500 more than the insurance company would pickup. It was a good decision on my part. It was cheaper to do it afterwards than to buy it all done. It looks a lot classier now. No pics after 'chroming' though.
front.jpg

rear.jpg
 
   / Ford F150-I'm Done. #183  
Cant believe this turned into a pissing match. Maybe I can start a .270 vs .30-06 or a Mossy Oak vs Realtree thread. I'm sure that will end well.
 
   / Ford F150-I'm Done. #184  
I never have understood the people who buy a pickup then cover the bed, why not just get the SUV you wanted to begin with?

What about the guys that waste valuable bed space with a tool box or fuel tank?;)
 
   / Ford F150-I'm Done. #185  
I'm not pissing on anyone, just saying I like the Tundra better than any previous vehicle.
 
   / Ford F150-I'm Done. #186  
I have an SUV and pull a trailer for dead animals in the back. No car wash needed....

LOL. Adding a trailer certainly changes the criteria here. At that point a car/trailer can be used to do most jobs a pickup or SUV would do.

Not everyone want's to pull a trailer to go hunting. Or to go to the hardware store. Or to move large furniture. etc...
 
   / Ford F150-I'm Done. #187  
Here ya go. :confused3:



View attachment 491835

Glad you were able to get that out of the way as this has been quite a discussion of truck bed use LOL.

Have you figured out that there are people who have different needs that you do who might use a topper of some sort to accomplish tasks? I sure hope so as you seem to struggle with the concept that some people have different needs than you do and a topper might be the solution that works best for them.
 
   / Ford F150-I'm Done. #189  
Yep.

I've never did a mathematical test of mileage on my F250 7.3L Powerstroke. The overhead hasn't been reset for 120K miles. I'd conservatively say it's probably closer to 15mpg. But pretty good for a truck that will pull 25K Gross weight all day long and never turn more than 2500 rpms. Love my diesel. There's no replacement for displacement. :)





View attachment 491864

My Titan averages the same mileage. It was much better except that it hits regen mode, and when I drive 20 miles at 10 MPG, it brings it back down to the same as you show. It does take some getting used to with new diesels. Even my tractor enters regen, but I can't track mileage. Such is life with our government regulations.
 
   / Ford F150-I'm Done. #190  
May I suggest a Toyota Tundra. Made in Texas! And Texas tough.

+1 on the Tundra! Never owned a Ford (only dealers within reasonable range fail to understand the concept of "deal" ) many many GM's both Chevy and GMC, and a couple of Dodges.

Most of the GM's were mechanically reliable but if you left the kitchen window open, you could HEAR them rusting. 2 of the 3 Dodges were good trucks, the '74 D100 and the '88 Dakota, but the 01 Dakota was a money pit and went away as soon as the warranty expired.

The '13 Tundra is as much truck as any I've ever owned (excepting possibly the '89 Chevy K3500 with the 454), MUCH better than the '07 GMC K2500 it replaced. Better ride, better mileage, better fit and finish, better interior and tows just as well.

I went with the Toyota based on my experience with 2 Corollas. I live on the coast of Maine and salt on the roads plus salt air from the ocean means rust is a fact of life. The '03 Corolla got traded after 9 years and it was STILL rust-free.
 

Tractor & Equipment Auctions

INGERSOLL RAND DD-16 SMOOTH DOUBLE DRUM ROLLER (A51242)
INGERSOLL RAND...
John Deere Ztrak M665 60in Zero Turn Mower (A48082)
John Deere Ztrak...
2015 Ford Escape 4x4 SUV (A50324)
2015 Ford Escape...
2014 Dodge Ram 5500 4x4 Bucket Truck with Altec AT40M - 45FT Boom, Jib Winch and Utility Bed (A52128)
2014 Dodge Ram...
John Deere 4020 Tractor (A50514)
John Deere 4020...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A52128)
80in HD Tooth...
 
Top