Citydude
Elite Member
Thought of doing some work last week. Haven't got to it yet...
What did you do at work today?
- Thread starter Shaneard
- Start date
- Views: 62452
OP
Shaneard
Veteran Member
- Joined
- Nov 18, 2016
- Messages
- 1,345
- Location
- Southern Virginia
- Tractor
- Ford 4630, Two IH 140's, John Deere A
Birdhunter1
Veteran Member
Not sure where you live in MO but a guy on Jackson MO fixed a leak in the top of my pump for $75 without having to rebuild it.
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 32,246
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
We've got a good small shop locally. Where mine is leaking he has to disassemble the pump to fix it. So he'll put a kit in it replacing all the seals and gaskets. Even then, it'll probably be $200 or so. Said it depended on what he found. Hoping for good news. Thanks for the tip though!!!!
PJSprog
Elite Member
Used the CMM this morning to help a supervisor get a couple of parts up and running for a big customer. Ours has been an abrasive relationship since I started here. However, getting him the info he needed for adjustments in about 2 minutes seems to have softened him a bit. He even thanked me (that's a first).
CEO brought around paychecks already today, too. I'll call this a good day.
CEO brought around paychecks already today, too. I'll call this a good day.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,015
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Keeping low profile..to much b.....ing going on. 
300UGUY
Super Member
That was my gig for 30 years. DEA, Sheffield, Mitoyo, but mostly Zeiss.
300UGUY
Super Member
OP
Shaneard
Veteran Member
- Joined
- Nov 18, 2016
- Messages
- 1,345
- Location
- Southern Virginia
- Tractor
- Ford 4630, Two IH 140's, John Deere A
Maybe stick with welding?
You say that cause I threw the piece out of the mill yesterday? lol. I love running the milling machine, I been welding for 31ish years and I get burnt out on it pretty quick.
OP
Shaneard
Veteran Member
- Joined
- Nov 18, 2016
- Messages
- 1,345
- Location
- Southern Virginia
- Tractor
- Ford 4630, Two IH 140's, John Deere A
The Woods bush hog I bought has a baler belt on the front of it as a guard, it's torn up. I was looking thru the manual and found a picture of a chain option. I started working on that. We don't have any fab machines to break or bend so I am going to make it angled with a plate and piece of angle iron. I started cutting slots and got one done. The guy at the hardware store is going to flip out when I tell him I need him to cut me 56 pieces of 5/16" chain 7 links long, lol.
