kioti linked pedal

[Mike Gibson]

What I do when doing a lot of loader work with the linked pedals I bump the hand throttle up to around 1900 which is close to matching the forward pedal when you use reverse.

 

[Nick H]

Thanks Nick! That's most likely more help than we would get from the dealer. Do you know what your max RPM's is when using the linked pedals in reverse? My son said his maxes out at 2550 in forward with the linked pedals and using the hand throttle.

I checked tonight, With the hand throttle at idle I get 2600rpm with the forward pedal, and 1800 with reverse.

 

[Mike Gibson]

Try advancing the hand throttle and see what you get.

 

[Grateful11]

I checked tonight, With the hand throttle at idle I get 2600rpm with the forward pedal, and 1800 with reverse.

Thanks Nick.

 

[Nick H]

Thanks Nick.

To Mike Gibson's point, the hand throttle on the 2610 has little effect on the linked pedal since it's completely mechanical. BUT, I think you could adjust the linked setup to operate at higher than idle RPM's. In other words, adjust the black sliding piece to so that it engages at a higher RPM, giving you full travel from the higher RPM setting on up. Downside would be, it would hit the throttle linkage if you tried to engage the linked throttle pedal when the tractor was idling.

 

[Mike Gibson]

On my 3510 the hand throttle is independent so you can set it wherever you want even when pedals are linked. On mine setting it @1900 RPM makes it close to the same speed in reverse as going forward. I don't want it as fast in reverse as all my problems seem to come when I back into something. It's close enough it doesn't bother me like it does without having the throttle advanced.

 

[hookd]

Just picked up my ck3510. I needed it right away so I didn't want to wait on the dealer to add the link pedal. I was wondering if anyone has a party number for the kit and any other installation tips? Thanks!

 

[Beeenvenue]

I have enjoyed my first 60 hours on my 3510se. Of those I have used the linked pedal maybe 2-3 hours tops.

Tilling - no, need full PTO rpm
Bush hogging - no, need full PTO rpm
Loader work - no, need power for hydraulics
Travel - a little, but mostly higher speeds so why not just set at 1800-2200 and go?

 

[hookd]

Thanks for the info, I'll use it for awhile before I decide if it's worth it.

 

[jcbGM]

My 3510se has it. I put 80 hours on the tractor this summer. I see no need for the linked pedal. I used it maybe 2x and couldn’t find the use for it. Cruise control is a different matter. Use it all the time mowing pastures.