Good morning!!!!

   / Good morning!!!! #80,721  
Happy Anniversary Kyle!
 
   / Good morning!!!! #80,722  
Well I got to play with the lathe a bit today. Faced off and end on a piece of 2 1/4 alu. and then turned down a 23/4" section on the end. Lathe worked well, played with different feed rates ect. Tried to post a pic but can't get it to work today. Maybe later.

Don, no FB for me, do use email for orders and to collect spam.

Kyle, Happy Anniversary.

Prayers for Hawaii and our friend David. 41" WOW. Ed
Got a good laugh: collecting spam.
 
   / Good morning!!!! #80,723  
Glad the lathe passed the first smoke check, Ed.:thumbsup:

Don said:
If collecting spam is something you like to do, Ed, I'd be happy to forward all of mine to you. Sometimes I feel so guilty keeping it all to myself I put it all in the trash to hide my shame.:confused2::laughing:
 
   / Good morning!!!! #80,726  
A friend sent me this and I thought it was well worth sharing. True heros!

IMG_3438.JPG
 
   / Good morning!!!! #80,727  
Also my wife and I are celebrating ours. We went and had a nice lunch while the kids were at school.

You need a fan to suck in more 103F heat??? Make sure your ceiling above the garage is insulated. Insulate your garage door. Put a mini split in that can remove the BTU load. Mini splits can run some pretty long lines to the main unit. Do you get the evening sun shining in while your back patio is shaded?

No mini splits. I just want to get rid of the 115˚ air when it cools to 90˚ outside after the sun sets. Back patio is shaded, faces NE - perfect direction to face which we took into consideration when buying this particular house. Insulation comes this winter.

Happy Anniversary. Kids in school today? I thought it was Saturday, now I'm like Drew confused on which day it is. Need to check a calendar :confused2:

So about 1/4 of us do not do Facebook.:thumbsup:

Appliance repairman fixed the leaking dishwasher by leveling it. Will see tonight if it's fixed, he seemed very competent.
 
   / Good morning!!!! #80,728  
Not I. Am I the only one who does not do Facebook? Anyone else not do Facebook?

I'm on Facebook strictly for some firearms related forums...ain't got much use for it otherwise...
 
   / Good morning!!!! #80,730  
Senator McCain passed away about 45 minutes ago. RIP.
 
   / Good morning!!!! #80,731  
Happy anniversary Kyle. Many more I hope are your fate. Marriage is hard and you both need to take pride in your accomplishments.

No social media for me other than TBN.

Wife is doing great. Wngsprd. No pain. I am in awe of modern medicine.

Thanks for the mower offer Buppies. Much appreciated. But I hope to get mine back this week. I hope you are doing well.

Ed..... I hope you and that lathe can find happiness together. Go tackle some projects.

Good night all. Have a great day tomorrow.
 
   / Good morning!!!! #80,734  
Good evening all. 80F for the start, clear sky , near calm wind. Wind was gusting 15+ this morning, sky stayed clear and high temp was 98F. Bike ride first thing this morning 46+ miles in just over 3 hours. Not much going on this afternoon, too hot to wok on Trek for the gravel bike conversion. Had to do some dog sitting duty today.
Riptides outstanding report!!
Ed nice to hear you are making chips :)
Kyle happy anniversary to you and the Mrs.
Facebook only on computer to track family and a few friends, texting because it get better results with certain family members and friends.
Rick, thanks for sharing, amazing pic.
Prayers for all.
 
   / Good morning!!!! #80,735  
HAPPY ANNIVERSARY MR AND MRS KYLE ! Hope you can enjoy many more!

Got to work outside all day. About 5PM, the skies darkened, some distant rumbles, but the clouds spli going north and bypassed dropping any rain on us. I had put all the tools away, so told myself 'forget it now', I'll finish up tomorrow. We could still use the rain though.

RIP, glad to hear the Mrs is up and about and that her pain has subsided.

Ed, nice to hear you got the lathe going! Can't wait to see the first project.

Everyone have a great evening!
 
   / Good morning!!!! #80,736  
Happy Anniversary Mr and Mrs Kyle
 
   / Good morning!!!! #80,737  
Happy anniversary Kyle
 
   / Good morning!!!! #80,738  
Riptides glad your wife is doing better
 
   / Good morning!!!! #80,739  
Buckeyefarmer hope you are feeling better
 
   / Good morning!!!! #80,740  
Thank you all for the anniversary well wishes.

I am most glad to hear about rip's wifey being pain free. That is great news.

Something killed 1 of our laying hens late this afternoon. I did hear a chicken make a squawking noise, but thought it was one of the hens trying to get caught up with the other 2, so I didn't think nothing of it... My wife went out maybe 30 minutes later to see the dead hen, and 2 piles of feathers about 25 feet apart just out our back door. My 2 youngest were fairly traumatized because the middle daughter that has some autism loves to chase, catch and feed grasshoppers to them. They are very tame to her. They will just squat down next to her and let her pick them up. I went looking for anything that might have done it with no luck. Checking the bird out, she seemed to have a wrung neck, and the feathers missing on her tail end. I did see a chicken hawk about 1/4 mile away, but would a chicken hawk pull out tail feathers? I couldn't see any blood anywhere, no talon or teeth marks. We've had grey foxes in the past, but haven't seen any for a couple of years. Would a coyote attack in the middle of the afternoon? I would guess a coyote would have ran off with the whole bird. That brings it back to dogs.... Might have to keep some firearms handy. S,S,&S.
 

Tractor & Equipment Auctions

Toro Greensmaster 3150-Q Riding Mower (A56859)
Toro Greensmaster...
2016 CATERPILLAR 330FL EXCAVATOR (A60429)
2016 CATERPILLAR...
LIKE NEW 2023 Rhino 84in Reverse Rotation Rotary Tiller (A56438)
LIKE NEW 2023...
2009 Haybuster GP-50 Grain Processer (A55315)
2009 Haybuster...
2014 GENIE GTH-5519 TELESCOPIC FORKLIFT (A60429)
2014 GENIE...
2018 FORD F-150 XL EXTENDED CAB TRUCK (A59823)
2018 FORD F-150 XL...
 
Top