OP
kostaschatzis
Member
hand finger?
MF 188 PTO problem
- Thread starter kostaschatzis
- Start date
- Views: 11106
DLTTrekkers
Veteran Member
Yes !
DLTTrekkers
Veteran Member
One finger on one hand
DLTTrekkers
Veteran Member
Remember ...that wil be the 1st setting
2nd setting is with your hand
3rd setting with your foot
OP
kostaschatzis
Member
of course but my friend he understood things in a differnend way
as the step -i was turn the engine fron the belt -
He knows from tractor but have small ears. Sure i m the responsible !
I ll see tomorrow again
BIG THANKS for the advices my friend DLTtrekker, we make something wrong , tommorow again, only if you can tell about the liquid (100mm about) means something?
as the step -i was turn the engine fron the belt -
He knows from tractor but have small ears. Sure i m the responsible !
I ll see tomorrow again
BIG THANKS for the advices my friend DLTtrekker, we make something wrong , tommorow again, only if you can tell about the liquid (100mm about) means something?
OP
kostaschatzis
Member
So we ll start from the pedal first?
Are we gonna open it again and do the same job again?
Are we gonna open it again and do the same job again?
DLTTrekkers
Veteran Member
Should not be there!
seals from rearmainseal or the gearbox is leaking !
DLTTrekkers
Veteran Member
Info for 1st step wil follow before we move to step 2
OP
kostaschatzis
Member
Ok. maybe is better to go at a workshop and find a proffesional
This is not decrease your advices. Hope this conversation will help others/
This is not decrease your advices. Hope this conversation will help others/
DLTTrekkers
Veteran Member
All these settings must be done without starting the engine
