Camera Security Systems???

[dragoneggs]

You guys are so far above me it's impossible to derail.

Thanks for everyone's comments and suggestions. I'm sooooo over my head.

Ha ha Richard... I sort of am too. :laughing:

 

[Kyle_in_Tex]

Anyone try Wyzecam?

My buddy got one and likes it.

 

[Sysop]

I have a very poor cellular internet connection at my farm. I use a router that can maintain a VPN connection back to my office to make it accessible over the internet (my cellular provider will not provide a public IP address to my connection). I use Vivotek brand cameras. :: VIVOTEK :: All are 1920x1080 resolution or higher. I run a small form factor Acer desktop for my video storage and video server needs. I'm able to stream 6 cameras at a time without issue.

I would recommend buying from here:
B&H Photo

I like Vivotek cameras because they can be used in many different ways, and can combine different methods to suit your needs. Cameras have a built in microSD card slot and the cameras can record directly to the microSD. Cameras can be powered by an external 12V DC power supply at the camera, or via Power-over-Ethernet. Cameras can send video data directly to a network attached storage appliance, and they can also send data to a server/video recorder. There are dedicated network recorders, and any Windows PC can act as a DVR with their included software. There is no limit to the number of cameras you can configure in a system. There are many styles of cameras with a variety of lens options to allow you to tailor the views to exactly what you need.

You can mix and match and setup exactly what you need, and the overall cost isn't bad at all for the quality you end up with.

For those that have multiple structures needing coverage, I advise "direct burial ethernet cable". It is UV resistant and is filled with a gel that prevents moisture intrusion. It only needs to be below the sod (no trenching) and can carry both data and power to your cameras. Here is some good stuff:
https://www.amazon.com/gp/product/B013IYY0MS/

 

[Jchonline]

Ubiquiti also uses POE, but this requires wires. You could do something like this. House: modem to router, router POE to beam antenna pointed at shop. Shop beam antenna to shop router/switch which then can provide POE to the shop and power all cameras. POE is an Ethernet cable that sends data AND power...so you don’t have to run separate power. However said device must support POE. This is why I just stick with Ubiquiti for everything. I know it will all work.

 

[Citydude]

If you could coax Willard out out the easy chair, he could add some security? Just spit balling here....

 

[ovrszd]

If you could coax Willard out out the easy chair, he could add some security? Just spit balling here....

His most aggressive act is peeing on tires....

 

[vvanders]

Ubiquiti also uses POE, but this requires wires. You could do something like this. House: modem to router, router POE to beam antenna pointed at shop. Shop beam antenna to shop router/switch which then can provide POE to the shop and power all cameras. POE is an Ethernet cable that sends data AND power...so you don稚 have to run separate power. However said device must support POE. This is why I just stick with Ubiquiti for everything. I know it will all work.

Yeah, I run their gear for all my network stuff here, professional quality gear at prosumer prices. As far as I know they're also the only ones to offer mobile app access without a monthly subscription since all their stuff uses WebRTC for p2p connections (at least on the unifi side).

I ended up not going with them since they didn't do monitoring as well but they were a serious consideration.

 

[plowhog]

I'm sooooo over my head.

My first post raised the question about maybe getting some help. This is one of those circumstances where a little $$ spent can offset incredible aggravation.

 

[plowhog]

Ubiquiti also uses POE, but this requires wires. You could do something like this. House: modem to router, router POE to beam antenna pointed at shop. Shop beam antenna to shop router/switch which then can provide POE to the shop and power all cameras. POE is an Ethernet cable that sends data AND power...so you don’t have to run separate power. However said device must support POE. This is why I just stick with Ubiquiti for everything. I know it will all work.

That is exactly what I do.

 

[plowhog]

I have a synology DS213J. I got it a few years ago and looking forward to implementing the Surveillance Station. Then I found out that it was an extra purchase on top of the server. Is that still the case? Or is it free now?

At first it was free unlimited. Last I knew it was free up to 2 cameras. Above that requires a camera license. It's really a good all-around system.