edgarrian
Platinum Member
Looks like a good and functional option. Nice find!
I am getting OEM SSQA tool holder for my 2016 CG 1710.
- Thread starter Gofast
- Start date
- Views: 8312
OP
Gofast
Gold Member
- Joined
- Mar 10, 2013
- Messages
- 371
- Location
- Greenville SC
- Tractor
- MF GC 1725, 2016 MF GC 1710, Belarus 300
I have my bucket converted. I asked what tool was the best to cut off your bolt on bucket brackets.
The plasma cutter is the way to go. That plasma cutter worked great.
I looked up everything attachments advice on where to put the adapter plate.
I welded up some bucket hooks on the top of my bucket.
I needed to use pallet forks this morning. It was so convenient to just switch from my bucket to the pallet forks.
The plasma cutter is the way to go. That plasma cutter worked great.
I looked up everything attachments advice on where to put the adapter plate.
I welded up some bucket hooks on the top of my bucket.
I needed to use pallet forks this morning. It was so convenient to just switch from my bucket to the pallet forks.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,889
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Congratulations :thumbsup:
OP
Gofast
Gold Member
- Joined
- Mar 10, 2013
- Messages
- 371
- Location
- Greenville SC
- Tractor
- MF GC 1725, 2016 MF GC 1710, Belarus 300
I got around to repurposing the Titan SSQA plate.
I made debris forks and a hitch all steel from scrap yard.
Total cost was about $26 to make both of these.
I made debris forks and a hitch all steel from scrap yard.
Total cost was about $26 to make both of these.
Last edited:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,889
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
:thumbsup: Very clever. They will be handy.
atsah
Elite Member
I have the same set. I like what you did..
