Fire260
Silver Member
Hey just seeing whats going on, there has been no post on here,at least on my side, first time Ive seen this, just making sure things are good??
Is everyone ALIVE ??
- Thread starter Fire260
- Start date
- Views: 3522
atsah
Elite Member
Same here..
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,958
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
We're here.Hey just seeing whats going on, there has been no post on here,at least on my side, first time Ive seen this, just making sure things are good??
Waiting for another Classic Yanmar newbie to come along and ask the newbie questions.
If you just need something to read here's a Yanmar story with photos and everything. First time in 14 years I got so stuck I had to use the other tractor to get out. Attached a cable and pulled the little guy sideways, then used the cable tension to drive in an arc like a pendulum to get free of the downhill fence.
Are we entertained yet?
Hey somebody, anybody, post something more relevant!
Last edited:
We're here.
Waiting for another Classic Yanmar newbie to come along and ask the newbie questions.
t
Classic Yanmar newbie Question .:laughing:
Ok hows this one. “ superstar member “ :cool2:
tell me how the piston rings go? The ones Hoye sell dont match whats in my manual . Theres only one with a taper, manual shows #2,3. Should have it. So does it go top#1 shiny one, #2 black,#3 black with taper down,#4 oil?
Thanks for your time and help.
Last edited:
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,958
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
I've never had to go into a Yanmar engine, so don't know the answer. Anybody?
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,958
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
That's just a 'participation trophy' for posting a lot - unrelated to the concept of 'wisdom'.