Model Advice

[nova3930]

Now I just need to find/build a cultivator and a bedder and it will be on. Wife is already listing out the stuff she wants in the garden.

 

[Jtullis13]

Yep the good ole wife list, been there before!

 

[CoyPatton]

Now I just need to find/build a cultivator and a bedder and it will be on. Wife is already listing out the stuff she wants in the garden.

I have seen several single row cultivators on marketplace on FB and on craigslist for not a lot (turns 2 middles if not to wide). I have not looked for a bedder/ hiller but they may be out there as well.

 

[nova3930]

I have seen several single row cultivators on marketplace on FB and on craigslist for not a lot (turns 2 middles if not to wide). I have not looked for a bedder/ hiller but they may be out there as well.

Yeah I've seen several cultivators around here for <$100. The bedders don't seem to be around but a friend bought one from a local small scale dealer a couple years ago for <$250. I got a welder friend I trade favors with that could build me one in no time as well...

 

[nova3930]

Just picked it up. Fired up and ran like a champ despite it being a little chilly today.

Sign in to your account

Sign in to your account

Sign in to your account

 

[nova3930]

The links aren't parsing right but those are pictures

 

[bmaverick]

Just picked it up. Fired up and ran like a champ despite it being a little chilly today.

SWEET machine Nova3930. :drink:

I only have OneDrive access at work, thus I was able to see the images. One Drive doesn't work on the home PC. Thus, I reposted them here ...

You must be very close to Fredricks too. I've been there before when living in the south. Took a bunch of pixs. They resemble much of what is already on their website over the years.
Should I ever need another tractor, I'll make the 20hr drive down there without a second thought because their refurbish process is top notch.

Question, on the tiller photo, up on the back end of the fenders, are those brake lights???? Are those LED too? My YM2610 has holes in that location. It would be nice to have additional lighting. :thumbsup:

 

[clemsonfor]

Pretty Tractor. I would of had them put my rears at the widest setting, unless you have super flat ground everywhere or need it narrow.

 

[nova3930]

SWEET machine Nova3930. :drink:

I only have OneDrive access at work, thus I was able to see the images. One Drive doesn't work on the home PC. Thus, I reposted them here ...

You must be very close to Fredricks too. I've been there before when living in the south. Took a bunch of pixs. They resemble much of what is already on their website over the years.
Should I ever need another tractor, I'll make the 20hr drive down there without a second thought because their refurbish process is top notch.

Question, on the tiller photo, up on the back end of the fenders, are those brake lights???? Are those LED too? My YM2610 has holes in that location. It would be nice to have additional lighting. :thumbsup:

In theory I thought that link would let anyone access the file. Thanks for the repost though.

Yeah you could say I'm close. If not for I65 and a mountain I could walk there without much trouble. They're 2 miles due east of me.

The lights I'm not sure. I haven't had time to look really close yet. Plan to get properly acquainted tomorrow.

 

[nova3930]

Pretty Tractor. I would of had them put my rears at the widest setting, unless you have super flat ground everywhere or need it narrow.

I had no clue there were multiple settings. If it's changable relatively easy I might do it myself.