Todays shop time.

[4570Man]

I finished a gun rack I’ve been working on. A member of the shooting team was killed in an accident and one of my buddies and I built the gun rack for a memorial.

 

[Peter 315]

I finished a gun rack I致e been working on. A member of the shooting team was killed in an accident and one of my buddies and I built the gun rack for a memorial. View attachment 645530View attachment 645531

Looks very nice... Sorry about your buddy..

 

[dragoneggs]

Added two 110v circuits to my sub panel today. Mostly ceiling outlets so I can drop cords instead of running extension cords all over getting in the way of wheeled stuff!

 

[Big Barn]

Added two 110v circuits to my sub panel today. Mostly ceiling outlets so I can drop cords instead of running extension cords all over getting in the way of wheeled stuff!

Awesome! Much more efficient.

 

[dragoneggs]

Awesome! Much more efficient.

Yep come a long ways in the last 5 months. From the original single 110v circuit from the house main and a heavy 220v 100ft extension cord running from an unused dryer outlet to... a 60amp 6-6-3 buried service to a subpanel in the garage. Now a 30amp circuit for welder/plasma, 20amp for air compressor, 20amp for table saw, bandsaw, and the two additional 110v

 

[Big Barn]

Yep come a long ways in the last 5 months. From the original single 110v circuit from the house main and a heavy 220v 100ft extension cord running from an unused dryer outlet to... a 60amp 6-6-3 buried service to a subpanel in the garage. Now a 30amp circuit for welder/plasma, 20amp for air compressor, 20amp for table saw, bandsaw, and the two additional 110v

And you got yourself a purple disco suit!

 

[dragoneggs]

Since I didn't see an 'Under the Seat Time' thread, I thought I would post this here. Replaced my mulching blades this winter and the new ones must be a little bigger than the ones that came with the OEM mulch kit. :confused3: Even though they are also from the Kubota dealer, one blade was hitting the mulch shroud between the two blades.

Got the Z-turn close to the shop door, lifted it with my tractor forks and did some crude carving with my plasma cutter. That was fun but I nearly had a fire from the grass stuck to the underside of the mower deck.

 

[aczlan]

Since I didn't see an 'Under the Seat Time' thread, I thought I would post this here. Replaced my mulching blades this winter and the new ones must be a little bigger than the ones that came with the OEM mulch kit. :confused3: Even though they are also from the Kubota dealer, one blade was hitting the mulch shroud between the two blades.

Got the Z-turn close to the shop door, lifted it with my tractor forks and did some crude carving with my plasma cutter. That was fun but I nearly had a fire from the grass stuck to the underside of the mower deck.

View attachment 648219 View attachment 648220

Hopefully you tried turning the far blade right side up first (red box is upside down, green box is right side up)?

Aaron Z

 

[dragoneggs]

Hopefully you tried turning the far blade right side up first (red box is upside down, green box is right side up)?

Aaron Z

Crap!!!!!!! No wonder! What an idiot! :mur: :duh: Thanks Aaron! :ashamed:

 

[spitter]

U got that much grass there already? I still got the plow and chains on . I still remember a 3 ' Easter snow storm that got everybody caught with their pants down . I don't put the mower deck on till the grass is a foot high. Did I mention I hate cutting grass!!!!!:drink: