locknlube cupler for a grease gun

   / locknlube cupler for a grease gun #251  
I didn't like using it. I didn't find it to be cleaner and it slowed me down considerably.

Hopefully others will chime in. Some guys love it.
 
   / locknlube cupler for a grease gun #252  
I didn't like using it. I didn't find it to be cleaner and it slowed me down considerably.

Hopefully others will chime in. Some guys love it.
Quite the opposite for me!
 
   / locknlube cupler for a grease gun #254  
I didn't like using it. I didn't find it to be cleaner and it slowed me down considerably.

Hopefully others will chime in. Some guys love it.

Wow... that's not something you hear very often. I know some folks have found the LnL a bit too long to reach certain hard to access zerks but otherwise it seems 98 out of 100 people love it. I have one on all three of my grease guns and can't imagine ever going back to a standard coupler.
 
   / locknlube cupler for a grease gun #255  
I didn’t like it either. Too long. Depending on how I park my loader I have 2 or 4 zerks I can’t get to unless I fire up the tractor and move it. And it doesn’t fit my shredder tailwheel axle zerk at all. Not gonna but another grease gun and deal with two guns (one where it works and one for those where it doesn’t) so I went back to the original.
 
   / locknlube cupler for a grease gun #256  
I didn’t like it either. Too long. Depending on how I park my loader I have 2 or 4 zerks I can’t get to unless I fire up the tractor and move it. And it doesn’t fit my shredder tailwheel axle zerk at all. Not gonna but another grease gun and deal with two guns (one where it works and one for those where it doesn’t) so I went back to the original.

I have a few zerks too that are difficult for the LnL to access. I just took a 6-inch grease hose, attached a zerk to one end and a regular coupler to the other and I use it as an adapter. So for the dozens of zerks I have on equipment I take advantage of the ease of greasing with the LnL and for those TWO zerks that are problematic I use my little adapter. :)
 
   / locknlube cupler for a grease gun #257  
I didn’t like it either. Too long. Depending on how I park my loader I have 2 or 4 zerks I can’t get to unless I fire up the tractor and move it. And it doesn’t fit my shredder tailwheel axle zerk at all. Not gonna but another grease gun and deal with two guns (one where it works and one for those where it doesn’t) so I went back to the original.

Too long? **** I just bought the XL!! Maybe I should have gotten the regular one and saved 10 bucks!!
 
   / locknlube cupler for a grease gun #258  
Too long? **** I just bought the XL!! Maybe I should have gotten the regular one and saved 10 bucks!!

Haven't needed the XL. Yes I have a couple zerks that aren't ideal with the LnL but otherwise I don't see how one doesn't love it.
 
   / locknlube cupler for a grease gun #259  
For years I wondered ....why can稚 they come up with a better mouse trap. I guess if I did more research I would have found it but again, this forum is a wealth of info.

Thx all
 
   / locknlube cupler for a grease gun #260  
Haven't needed the XL. Yes I have a couple zerks that aren't ideal with the LnL but otherwise I don't see how one doesn't love it.

Same here, I made a right angle adapter for getting the two Zerks on my tractor I couldn't get on. I showcased it here on a thread some years ago.
 

Tractor & Equipment Auctions

2011 TROXELL 140BBL TRI AXLE VACUUM TRAILER (A50854)
2011 TROXELL...
(2) ROLLS OF HD CHAIN LINK MESH WIRE (A50460)
(2) ROLLS OF HD...
2020 JLG 1732 16,755lb 4x4 High-Capacity Rough Terrain Telehandler (A49461)
2020 JLG 1732...
2015 Volkswagen Jetta TDI Sedan (A50324)
2015 Volkswagen...
2013 JOHN DEERE 470G LC EXCAVATOR (A51242)
2013 JOHN DEERE...
2019 Komatsu PC490LC Hydraulic Excavator (A49461)
2019 Komatsu...
 
Top