Kubota M series VS, Mahindra 6000 series

[Industrial Toys]

Dealers are not a charity. Costs alot these days to keep the doors open.

Reading other threads where people can't get parts for "other" tractor makes, just reinforces my beliefs. I have Deere and Kubota dealers in every direction from me and parts are most often a day away. Isn't that worth a lot? I rarely like the prices, but it sure beats the parts not being available.

 

[oosik]

Hey - cheap parts can end up being just a bandaid. I'll take available, expensive parts - any day - over "no parts available". Besides - in the eleven years I've had my M6040 - with routine & correct maintenance - I've yet to need any replacement parts. But the dealer is right there if I need him.

And with my first tractor - Ford 1700 - I only had to replace the front tires once. The only "replacement parts" in the 27 years I owned that tractor.

Yes - I definitely feel that having a good, reputable dealer - close at hand - is a very worthwhile advantage.

Just one less thing to worry about.

 

[Sean2202]

Just more of the same from guys who like hearing themselves talk .And dont really know the facts.

I am unsure where you are going with this? Can you fill me in with some facts that I may have missed or overlooked? Thanks.

 

[Molalla1]

Very good analogy. My opinion as well.

Of course . . . I have a quite a few brands all are good at what they do.

 

[Molalla1]

Yeah.....I bet the dealer would love to have your pre pollution devices tractor.
He could likely sell it for close to the price of a new one, but would not be particularly generous with you on the trade.

:thumbsup: . . .

 

[Molalla1]

Thanks for all your help, input and opinions. I like the analogy of comparing Kubota as Snap on and Harbor freight. I am a Kubota guy so I am a little biased but trying to research all options that are available. We are buying a tractor at my work as well and the boss was dead set on Kioti RX6620 compared to the Kubota M 6010(Same options Kioti came in about $1500 cheaper, a no brainer choice to me). I will save that snap on analogy as to when his Kioti has a problem. Yes the Japanese is a different culture and they do their very best to save "face". I know Mahindra is "The number one selling tractor brand in the world". What other items have you all bought from India that was of any quality?

An MX is out of the question as it is hydrostatic

I updated a new spec sheet for the opinions and options noted
up to $49,813 for the M7060 Kubota
1 FRONT - 9.5-24 R1 Goodyear Dura Torque
REAR - 16.9-30 R1 Goodyear Dura Torque Castinc.
(AMR8955C & AMR8935D)
1 72" TWO-LEVER QUICK ATTACH ROUND BACK BUCKET$703.00
(M1811)
2 REAR WHEEL WEIGHTS - 2 PER SET 164 LBS. EACH$636.00
(M8126A)
1 3RD FUNCTION VALVE KIT (ROPS)$949.00
(M7991)
1 REAR WORK LIGHT KIT (1 PER KIT)$87.00
(M7630)
1 LDR W QC & FRT GRD M6060/7060 M4-061/071$5,081.00
(LA1154A)
1 REAR AXLE SPACER KIT$881.00
(M9564)
1 BOLT KIT/M8126A WHL WGHT/CAST DISK$27.00
(M8119B)
1 BOLT KIT FOR REAR WHEEL WEIGHTS$25.00
(M8127B)
1 SELF LEVELING CONTROL VALVE KIT/ROPS$1,900.00
(M7998)
FACTORY ASSEMBLY$260.00

Not all Mahindra are built in India that is I believe their corporate office.

 

[rademamj1]

I did check Mahindra Worldwide Corporate website, and after extensive reading, apparently for Mahindra tractors: approximately 60% of parts are sourced from India, 20% China, 14% Korea and 6% sourced from Japan. All are assembled in India at the worlds largest tractor factory and shipped to various markets, where specific upgrades for local markets are made using local parts. So options like 3rd function hydraulics, exterior lighting, seating upgrades and tires can be American made.

 

[Molalla1]

I did check Mahindra Worldwide Corporate website, and after extensive reading, apparently for Mahindra tractors: approximately 60% of parts are sourced from India, 20% China, 14% Korea and 6% sourced from Japan. All are assembled in India at the worlds largest tractor factory and shipped to various markets, where specific upgrades for local markets are made using local parts. So options like 3rd function hydraulics, exterior lighting, seating upgrades and tires can be American made.

No . . . they have tractors made in several countries . . . the only one I am familiar with is manufactured in Japan . . . Mitsubishi Corp. You are correct about the loaders etc.

 

[mcfarmall]

What other items have you all bought from India that was of any quality?

An MX is out of the question as it is hydrostatic

The finger snapper linch pins and CAT I lower link pins are pretty good. Aside from the language barrier, tech support is good.

The Kubota MX series is available with both mechanical shuttle and hydro tranny options.

 

[rScotty]

One thing I did not mention is the ability to remove the loader easily so it can be used for field work. Easily I mean 1 person 66 years old with little mechanical ability.

Most of us no longer remove the loader for field work, we just remove the bucket. Without the bucket, the rest of the loader isn't in the way. Dropping or reattaching the bucket just takes throwing two levers. Takes only a minute or two. All the Kubotas have an option for a few hundred bucks to use these quick change buckets on the loader - called SSQA. You want that anyway so that you can use a spear, or hay tines or whatever.

BTW, my choice is the Kubota in 7060 or larger with comfort ride (damping for the front end loader), air suspension seat, open station but with a canopy roof top just for shade. Transmission: as many manual shift gears as you can get that has their powershifting clutchless forward/reverse lever. And Ag tires or those new style radials. Probably get at least one set of front and rear remotes.
Someday I'll be looking at those Mahindras, but right now I'd go Kubota.
good luck,
rScotty