Good morning!!!!

   / Good morning!!!! #123,581  
All this food talk just getting me ready to loosen my belt notch before the holiday's cooking. :licking:
I got a spiral cut honey ham to do up for Christmas. Will make up a Maple and brown sugar glaze for it. Also plan on making some candied carrots, stuffing, green beans, mashed taters, Dutch apple pie, chocolate pie, and some other goodies
 
   / Good morning!!!! #123,582  
I’ve decided not to bbq my pork chops today, instead I’m going to do a dusting of House Autry, Old Bay, onion and garlic and bake them, just for a change.
 
   / Good morning!!!! #123,583  
The dusting of snow we got overnight turned out to be 12". Took me 4 hours to do two driveways. But I did stop and chew the fat with one neighbour.
When the tractor lugs down she sure has a bark. Straight pipes will do that.
 
   / Good morning!!!! #123,584  
my pants are getting tighter just pondering these ribs and and and
worst part is they really are getting tighter, I need to get more exercise, walk more.
I sure have the cooking and eating part down fine...

Had a hard time squeezing the Titebond III glue bottle today, aggravated my carpal tunnel.
Need a different dispenser that doesn't require squeezing.
Perhaps a cordless power caulking device that could squeeze out glue instead.
Or construction adhesive.
Wrists really hurt from doing this plus I did 2 in a row. Fair amount of glue to squeeze and the bottle is down
to one third.
My cordless Dewalt grease gun was one of my favorite tools on the farm.
Now I just need something similar for glue, which clearly has issues with gumming up the works or hardening.
I would just use a portion of a tube of adhesive and question whether the remaining part will last a week.
And then what, something high tech like a 10D nail to plug the hole?
I waste a lot of glue and money not being able to use all the glue I paid for...
 
   / Good morning!!!! #123,586  
Home Depot order picked up, tile saw registration submitted to RIGID ... :thumbsup:

Unfortunately no joy on the electrical issues.

Determined that the interruption on the power is happening on (at least) two different circuits in the original 100A panel that was put in when the house was built.

That panel is now a sub-panel to a larger 200A panel which is adjacent to it.

Have to think about it some more and see if I can come up with anything.

Might have to call an electrician out.

Drew - I always make sure to squeeze all the excess air out of my Titebond bottle here ... before I push the nozzle down to seal it.

That way it won't start to dry and thicken up when it is still in the bottle.
 
   / Good morning!!!! #123,589  
Drew, I’m a big fan of Loctite PL premium urethane construction adhesive. I dispense it with a Makita cordless caulk gun and use these-
https://www.lowes.com/pd/Core-Gear-Caulk-Plug/4068073
to save the tube for the next use. I’m pretty sure that I showed it to you when you were here.
It’s a real hand saver.

sounds good, thanks. Instead of 200+ for Makita gun, think I'm going to use my air compressor and save a lot of money.
Easy to swap the air nailer in and out.
https://www.amazon.com/gp/product/B001VY1KU8/ref=ox_sc_act_title_2?smid=ATVPDKIKX0DER&psc=1
https://www.amazon.com/gp/product/B00VLZD1FE/ref=crt_ewc_title_dp_1?ie=UTF8&smid=ATVPDKIKX0DER&th=1

also need to get some more work gloves.
 
   / Good morning!!!! #123,590  
DF, thanks for the info. So, basically half of the smoker time, the second half oven time... got it!
Heres the finished results 20201213_173350.jpg
 

Tractor & Equipment Auctions

2001 GMC W4 CRANE TRUCK (A51222)
2001 GMC W4 CRANE...
2015 KENWORTH T800 MID-ROOF SLEEPER (A50854)
2015 KENWORTH T800...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2011 TROXELL 140BBL TRIAXLE VACUUM TRAILER (A50854)
2011 TROXELL...
2-Row Peanut Inverter (Chain Drive, PTO, 3-Point Hitch) (A51039)
2-Row Peanut...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
 
Top