Switch jumper help

[Strummer]

Doing some trouble shooting , need a hand with a switch . How should I jump this switch ?

 

[Maxify55]

Got an ohm meter for testing?
Which lead carries the power?
Jump that one to whichever lead carries the ground.
Bob's your uncle!

 

[Xfaxman]

You need to find the wires that go to the normally open contacts in the switch.

 

[Strummer]

Got an ohm meter for testing?
Which lead carries the power?
Jump that one to whichever lead carries the ground.
Bob's your uncle!

Dang my meter is in my truck at buddies shop . Getting some work done . I’m meter less for a few days .

 

[Strummer]

I did clean the heck out of it . Was packed full of mud . That might of been a big part of the problem.

 

[Xfaxman]

What switch?

What problem?

 

[Strummer]

What switch?

What problem?

It’s the seat switch . Trying to trouble shoot my intermittent starting/ not starting issue

 

[workinonit]

If that's the pigtail that goes to the switch and you are asking how you would jump it out after you determine it is your problem....if you can't find a mating connector like that to make a jumper harness you can get some crimp on disconnect lugs and jump the terminals out that would normally be the switch legs.

 

[Strummer]

If that's the pigtail that goes to the switch and you are asking how you would jump it out after you determine it is your problem....if you can't find a mating connector like that to make a jumper harness you can get some crimp on disconnect lugs and jump the terminals out that would normally be the switch legs.

I want to jump it out to see if it’s my problem. If it is I will replace the switch.