Woodland Mills WC-68 wood chipper delivered today!

[Underdog57]

bigtiller, I second that thought!! I didn't even see that option when I got mine and I sure would like to have one also. It looks quite handy. Right now I just have my saw sitting on the ground. Works just fine but sure not as convenient! Enjoy chipping Underdog57. That chipper makes an awkward job fun to do!

Thanks Gregster613 , will do!

Chipping will have to wait for a while, gonna be snowing everyday for a while!

 

[Underdog57]

This is what I did with the shipping pallet the chipper came on. First I cut the 4 shipping blocks off so I don't have to be so precise when I set in on. I had these casters laying around, don't know if they are heavy enough but we'll see.
Most of the weight is where the bigger beams are so I thought I'd mount the casters there, hopefully it won't be tippy. We'll see how it works, can always be changed up!

It will be a while before I can try it out, all my snow equipment is on the tractor now!

 

[crazyal]

I wish someone would make a woodchip stove (like a pellet stove). I would own one in a heartbeat. The few times I've rented a chipper I had a fun time watching piles of brush turn into chips.

 

[RalphVa]

This is what I did with the shipping pallet the chipper came on. First I cut the 4 shipping blocks off so I don't have to be so precise when I set in on. I had these casters laying around, don't know if they are heavy enough but we'll see.
Most of the weight is where the bigger beams are so I thought I'd mount the casters there, hopefully it won't be tippy. We'll see how it works, can always be changed up!

It will be a while before I can try it out, all my snow equipment is on the tractor now!

View attachment 685600 View attachment 685601 View attachment 685602

View attachment 685603 View attachment 685604

Doubt those casters you have are heavy enough. I'd originally put some plastic ones underneath the bush hog's front trolly of 2x6 and casters underneath. Had to go with metal ones.

Metal ones (300 # each) are what I had welded onto the bottom of the shipment metal. The wife made the top into a table. Below are some pics.

Ralph

 

[Underdog57]

Doubt those casters you have are heavy enough. I'd originally put some plastic ones underneath the bush hog's front trolly of 2x6 and casters underneath. Had to go with metal ones.

Metal ones (300 # each) are what I had welded onto the bottom of the shipment metal. The wife made the top into a table. Below are some pics.

Ralph

Yeah, I have some doubts too, just trying to use stuff I have laying around. I'll upgrade the casters if I have to.

Yours looks good Ralph.

 

[bigtiller]

This is what I did with the shipping pallet the chipper came on. First I cut the 4 shipping blocks off so I don't have to be so precise when I set in on. I had these casters laying around, don't know if they are heavy enough but we'll see.
Most of the weight is where the bigger beams are so I thought I'd mount the casters there, hopefully it won't be tippy. We'll see how it works, can always be changed up!

It will be a while before I can try it out, all my snow equipment is on the tractor now!

About the shipping container, will a 3point hitch Carry-All look like it will fit under it?

I was just wondering about that incase the delivery driver couldn't get it from the street to the shed for some reason.

 

[oldballs]

About the shipping container, will a 3point hitch Carry-All look like it will fit under it?

I was just wondering about that incase the delivery driver couldn't get it from the street to the shed for some reason.

Maybe some of these pics will help answer you question BT............

Cheers,
Mike

 

[Buppies]

Sounds like a nice implement to have

 

[Underdog57]

About the shipping container, will a 3point hitch Carry-All look like it will fit under it?

I was just wondering about that incase the delivery driver couldn't get it from the street to the shed for some reason.

I could get you some measurements if you want?

 

[RalphVa]

About the shipping container, will a 3point hitch Carry-All look like it will fit under it?

I was just wondering about that incase the delivery driver couldn't get it from the street to the shed for some reason.

Carryall won't fit, but some forks would.

Ralph